staging: comedi: amplc_pc236: Replace printk calls

Replace the printk calls with dev_info, dev_err, etc.  There were some
consecutive printk calls without newlines which now scnprintf into a
temporary buffer and this bit of code has been factored out into new
function pc236_report_attach().

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 007b45bef7b02096d70750008c6dd94abd0a820e..b56881c7e6035ea7b5d3e6e74536a5827ace3b30 100644 (file)
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -201,12 +201,12 @@ pc236_find_pci(struct comedi_device *dev, int bus, int slot,
        }
        /* No match found. */
        if (bus || slot) {
-               printk(KERN_ERR
-                      "comedi%d: error! no %s found at pci %02x:%02x!\n",
-                      dev->minor, thisboard->name, bus, slot);
+               dev_err(dev->class_dev,
+                       "error! no %s found at pci %02x:%02x!\n",
+                       thisboard->name, bus, slot);
        } else {
-               printk(KERN_ERR "comedi%d: error! no %s found!\n",
-                      dev->minor, thisboard->name);
+               dev_err(dev->class_dev, "error! no %s found!\n",
+                       thisboard->name);
        }
        return -EIO;
 }
@@ -217,12 +217,12 @@ pc236_find_pci(struct comedi_device *dev, int bus, int slot,
  * if there is a conflict.
  */
 #if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
-static int pc236_request_region(unsigned minor, unsigned long from,
+static int pc236_request_region(struct comedi_device *dev, unsigned long from,
                                unsigned long extent)
 {
        if (!from || !request_region(from, extent, PC236_DRIVER_NAME)) {
-               printk(KERN_ERR "comedi%d: I/O port conflict (%#lx,%lu)!\n",
-                      minor, from, extent);
+               dev_err(dev->class_dev, "I/O port conflict (%#lx,%lu)!\n",
+                      from, extent);
                return -EIO;
        }
        return 0;
@@ -431,6 +431,39 @@ static irqreturn_t pc236_interrupt(int irq, void *d)
        return IRQ_RETVAL(handled);
 }
 
+static void pc236_report_attach(struct comedi_device *dev, unsigned int irq)
+{
+       char tmpbuf[60];
+       int tmplen;
+
+       switch (thisboard->bustype) {
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
+       case isa_bustype:
+               tmplen = scnprintf(tmpbuf, sizeof(tmpbuf),
+                                  "(base %#lx) ", dev->iobase);
+               break;
+#endif
+#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+       case pci_bustype:
+               tmplen = scnprintf(tmpbuf, sizeof(tmpbuf),
+                                  "(pci %s) ", pci_name(devpriv->pci_dev));
+               break;
+#endif
+       default:
+               tmplen = 0;
+               break;
+       }
+       if (irq)
+               tmplen += scnprintf(&tmpbuf[tmplen], sizeof(tmpbuf) - tmplen,
+                                   "(irq %u%s) ", irq,
+                                   (dev->irq ? "" : " UNAVAILABLE"));
+       else
+               tmplen += scnprintf(&tmpbuf[tmplen], sizeof(tmpbuf) - tmplen,
+                                   "(no irq) ");
+       dev_info(dev->class_dev, "%s %sattached\n",
+                dev->board_name, tmpbuf);
+}
+
 /*
  * Attach is called by the Comedi core to configure the driver
  * for a particular board.  If you specified a board_name array
@@ -449,16 +482,10 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        int share_irq = 0;
        int ret;
 
-       printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor,
-              PC236_DRIVER_NAME);
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
+       dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach\n");
        ret = alloc_private(dev, sizeof(struct pc236_private));
        if (ret < 0) {
-               printk(KERN_ERR "comedi%d: error! out of memory!\n",
-                      dev->minor);
+               dev_err(dev->class_dev, "error! out of memory!\n");
                return ret;
        }
        /* Process options. */
@@ -483,16 +510,13 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
                break;
 #endif
        default:
-               printk(KERN_ERR
-                      "comedi%d: %s: BUG! cannot determine board type!\n",
-                      dev->minor, PC236_DRIVER_NAME);
+               dev_err(dev->class_dev, PC236_DRIVER_NAME
+                       ": BUG! cannot determine board type!\n");
                return -EINVAL;
                break;
        }
 
-/*
- * Initialize dev->board_name.
- */
+       /* Initialize dev->board_name. */
        dev->board_name = thisboard->name;
 
        /* Enable device and reserve I/O spaces. */
@@ -501,9 +525,8 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
                ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
                if (ret < 0) {
-                       printk(KERN_ERR
-                              "comedi%d: error! cannot enable PCI device and request regions!\n",
-                              dev->minor);
+                       dev_err(dev->class_dev,
+                               "error! cannot enable PCI device and request regions!\n");
                        return ret;
                }
                devpriv->lcr_iobase = pci_resource_start(pci_dev, 1);
@@ -513,21 +536,16 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
        {
 #if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
-               ret = pc236_request_region(dev->minor, iobase, PC236_IO_SIZE);
+               ret = pc236_request_region(dev, iobase, PC236_IO_SIZE);
                if (ret < 0)
                        return ret;
 #endif
        }
        dev->iobase = iobase;
 
-/*
- * Allocate the subdevice structures.  alloc_subdevice() is a
- * convenient macro defined in comedidev.h.
- */
        ret = alloc_subdevices(dev, 2);
        if (ret < 0) {
-               printk(KERN_ERR "comedi%d: error! out of memory!\n",
-                      dev->minor);
+               dev_err(dev->class_dev, "error! out of memory!\n");
                return ret;
        }
 
@@ -535,8 +553,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        /* digital i/o subdevice (8255) */
        ret = subdev_8255_init(dev, s, NULL, iobase);
        if (ret < 0) {
-               printk(KERN_ERR "comedi%d: error! out of memory!\n",
-                      dev->minor);
+               dev_err(dev->class_dev, "error! out of memory!\n");
                return ret;
        }
        s = dev->subdevices + 1;
@@ -560,28 +577,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
                        s->cancel = pc236_intr_cancel;
                }
        }
-       printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-       switch (thisboard->bustype) {
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
-       case isa_bustype:
-               printk("(base %#lx) ", iobase);
-               break;
-#endif
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
-       case pci_bustype:
-               printk("(pci %s) ", pci_name(pci_dev));
-               break;
-#endif
-       default:
-               break;
-       }
-       if (irq)
-               printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
-       else
-               printk("(no irq) ");
-
-       printk("attached\n");
-
+       pc236_report_attach(dev, irq);
        return 1;
 }