]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
dt-bindings: Add binding for Sitronix ST7735R display panels
authorDavid Lechner <david@lechnology.com>
Mon, 1 Jan 2018 19:02:15 +0000 (13:02 -0600)
committerNoralf Trønnes <noralf@tronnes.org>
Wed, 3 Jan 2018 12:53:46 +0000 (13:53 +0100)
This adds a new device tree binding for Sitronix ST7735R display panels,
such as the Adafruit 1.8" TFT.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1514833336-22564-3-git-send-email-david@lechnology.com
Documentation/devicetree/bindings/display/sitronix,st7735r.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
new file mode 100644 (file)
index 0000000..f0a5090
--- /dev/null
@@ -0,0 +1,35 @@
+Sitronix ST7735R display panels
+
+This binding is for display panels using a Sitronix ST7735R controller in SPI
+mode.
+
+Required properties:
+- compatible:  "jianda,jd-t18003-t01", "sitronix,st7735r"
+- dc-gpios:    Display data/command selection (D/CX)
+- reset-gpios: Reset signal (RSTX)
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:    panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight:   phandle of the backlight device attached to the panel
+
+Example:
+
+       backlight: backlight {
+               compatible = "gpio-backlight";
+               gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+       }
+
+       ...
+
+       display@0{
+               compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
+               reg = <0>;
+               spi-max-frequency = <32000000>;
+               dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+               rotation = <270>;
+               backlight = &backlight;
+       };