}
/*
- * Flush & invalidate a VA range that is homed remotely on a single core,
- * waiting until the memory controller holds the flushed values.
+ * Flush and invalidate a VA range that is homed remotely, waiting
+ * until the memory controller holds the flushed values. If "hfh" is
+ * true, we will do a more expensive flush involving additional loads
+ * to make sure we have touched all the possible home cpus of a buffer
+ * that is homed with "hash for home".
*/
-static inline void finv_buffer_remote(void *buffer, size_t size)
-{
- char *p;
- int i;
-
- /*
- * Flush and invalidate the buffer out of the local L1/L2
- * and request the home cache to flush and invalidate as well.
- */
- __finv_buffer(buffer, size);
-
- /*
- * Wait for the home cache to acknowledge that it has processed
- * all the flush-and-invalidate requests. This does not mean
- * that the flushed data has reached the memory controller yet,
- * but it does mean the home cache is processing the flushes.
- */
- __insn_mf();
-
- /*
- * Issue a load to the last cache line, which can't complete
- * until all the previously-issued flushes to the same memory
- * controller have also completed. If we weren't striping
- * memory, that one load would be sufficient, but since we may
- * be, we also need to back up to the last load issued to
- * another memory controller, which would be the point where
- * we crossed an 8KB boundary (the granularity of striping
- * across memory controllers). Keep backing up and doing this
- * until we are before the beginning of the buffer, or have
- * hit all the controllers.
- */
- for (i = 0, p = (char *)buffer + size - 1;
- i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
- ++i) {
- const unsigned long STRIPE_WIDTH = 8192;
-
- /* Force a load instruction to issue. */
- *(volatile char *)p;
-
- /* Jump to end of previous stripe. */
- p -= STRIPE_WIDTH;
- p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
- }
-
- /* Wait for the loads (and thus flushes) to have completed. */
- __insn_mf();
-}
+void finv_buffer_remote(void *buffer, size_t size, int hfh);
#endif /* _ASM_TILE_CACHEFLUSH_H */
{
invalidate_icache((const void *)start, end - start, PAGE_SIZE);
}
+
+
+/* Force a load instruction to issue. */
+static inline void force_load(char *p)
+{
+ *(volatile char *)p;
+}
+
+/*
+ * Flush and invalidate a VA range that is homed remotely on a single
+ * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting
+ * until the memory controller holds the flushed values.
+ */
+void finv_buffer_remote(void *buffer, size_t size, int hfh)
+{
+ char *p, *base;
+ size_t step_size, load_count;
+ const unsigned long STRIPE_WIDTH = 8192;
+
+ /*
+ * Flush and invalidate the buffer out of the local L1/L2
+ * and request the home cache to flush and invalidate as well.
+ */
+ __finv_buffer(buffer, size);
+
+ /*
+ * Wait for the home cache to acknowledge that it has processed
+ * all the flush-and-invalidate requests. This does not mean
+ * that the flushed data has reached the memory controller yet,
+ * but it does mean the home cache is processing the flushes.
+ */
+ __insn_mf();
+
+ /*
+ * Issue a load to the last cache line, which can't complete
+ * until all the previously-issued flushes to the same memory
+ * controller have also completed. If we weren't striping
+ * memory, that one load would be sufficient, but since we may
+ * be, we also need to back up to the last load issued to
+ * another memory controller, which would be the point where
+ * we crossed an 8KB boundary (the granularity of striping
+ * across memory controllers). Keep backing up and doing this
+ * until we are before the beginning of the buffer, or have
+ * hit all the controllers.
+ *
+ * If we are flushing a hash-for-home buffer, it's even worse.
+ * Each line may be homed on a different tile, and each tile
+ * may have up to four lines that are on different
+ * controllers. So as we walk backwards, we have to touch
+ * enough cache lines to satisfy these constraints. In
+ * practice this ends up being close enough to "load from
+ * every cache line on a full memory stripe on each
+ * controller" that we simply do that, to simplify the logic.
+ *
+ * FIXME: See bug 9535 for some issues with this code.
+ */
+ if (hfh) {
+ step_size = L2_CACHE_BYTES;
+ load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) *
+ (1 << CHIP_LOG_NUM_MSHIMS());
+ } else {
+ step_size = STRIPE_WIDTH;
+ load_count = (1 << CHIP_LOG_NUM_MSHIMS());
+ }
+
+ /* Load the last byte of the buffer. */
+ p = (char *)buffer + size - 1;
+ force_load(p);
+
+ /* Bump down to the end of the previous stripe or cache line. */
+ p -= step_size;
+ p = (char *)((unsigned long)p | (step_size - 1));
+
+ /* Figure out how far back we need to go. */
+ base = p - (step_size * (load_count - 2));
+ if ((long)base < (long)buffer)
+ base = buffer;
+
+ /*
+ * Fire all the loads we need. The MAF only has eight entries
+ * so we can have at most eight outstanding loads, so we
+ * unroll by that amount.
+ */
+#pragma unroll 8
+ for (; p >= base; p -= step_size)
+ force_load(p);
+
+ /*
+ * Repeat, but with inv's instead of loads, to get rid of the
+ * data we just loaded into our own cache and the old home L3.
+ * No need to unroll since inv's don't target a register.
+ */
+ p = (char *)buffer + size - 1;
+ __insn_inv(p);
+ p -= step_size;
+ p = (char *)((unsigned long)p | (step_size - 1));
+ for (; p >= base; p -= step_size)
+ __insn_inv(p);
+
+ /* Wait for the load+inv's (and thus finvs) to have completed. */
+ __insn_mf();
+}
panic("Unsafe to continue.");
}
+void flush_remote_page(struct page *page, int order)
+{
+ int i, pages = (1 << order);
+ for (i = 0; i < pages; ++i, ++page) {
+ void *p = kmap_atomic(page);
+ int hfh = 0;
+ int home = page_home(page);
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (home == PAGE_HOME_HASH)
+ hfh = 1;
+ else
+#endif
+ BUG_ON(home < 0 || home >= NR_CPUS);
+ finv_buffer_remote(p, PAGE_SIZE, hfh);
+ kunmap_atomic(p);
+ }
+}
+
void homecache_evict(const struct cpumask *mask)
{
flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0);
}
-/* Return a mask of the cpus whose caches currently own these pages. */
-static void homecache_mask(struct page *page, int pages,
- struct cpumask *home_mask)
+/*
+ * Return a mask of the cpus whose caches currently own these pages.
+ * The return value is whether the pages are all coherently cached
+ * (i.e. none are immutable, incoherent, or uncached).
+ */
+static int homecache_mask(struct page *page, int pages,
+ struct cpumask *home_mask)
{
int i;
+ int cached_coherently = 1;
cpumask_clear(home_mask);
for (i = 0; i < pages; ++i) {
int home = page_home(&page[i]);
if (home == PAGE_HOME_IMMUTABLE ||
home == PAGE_HOME_INCOHERENT) {
cpumask_copy(home_mask, cpu_possible_mask);
- return;
+ return 0;
}
#if CHIP_HAS_CBOX_HOME_MAP()
if (home == PAGE_HOME_HASH) {
continue;
}
#endif
- if (home == PAGE_HOME_UNCACHED)
+ if (home == PAGE_HOME_UNCACHED) {
+ cached_coherently = 0;
continue;
+ }
BUG_ON(home < 0 || home >= NR_CPUS);
cpumask_set_cpu(home, home_mask);
}
+ return cached_coherently;
}
/*
if (b_len != 0) {
if (!hash_default)
- finv_buffer_remote(b_data, b_len);
+ finv_buffer_remote(b_data, b_len, 0);
cpa = __pa(b_data);
frags[n].cpa_lo = cpa;
if (!hash_default) {
void *va = pfn_to_kaddr(pfn) + f->page_offset;
BUG_ON(PageHighMem(f->page));
- finv_buffer_remote(va, f->size);
+ finv_buffer_remote(va, f->size, 0);
}
cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset;
projects / mirror_ubuntu-hirsute-kernel.git / commitdiff