* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
Required properties:
-- compatible: Should be "atmel,<chip>-usart"
+- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
+ For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stop working while it is in idle state, which is probably
+ not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
- select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91
+ select SOC_BUS
select USE_OF
help
This enables support for systems based on Atmel
};
dbgu: serial@fffff200 {
- compatible = "atmel,at91rm9200-usart";
+ compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
+ <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
- <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
+ <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
};
dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
};
usb1: gadget@fffa4000 {
- compatible = "atmel,at91rm9200-udc";
+ compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
};
usb1: gadget@fffa4000 {
- compatible = "atmel,at91rm9200-udc";
+ compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&udc_clk>, <&udpck>;
- clock-names = "usb_clk", "udc_clk", "udpck";
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
+ atmel,matrix = <&matrix>;
status = "disabled";
};
};
matrix: matrix@ffffee00 {
- compatible = "atmel,at91sam9260-bus-matrix";
+ compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};
};
dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
sram1: sram@00500000 {
compatible = "mmio-sram";
- reg = <0x00300000 0x4000>;
+ reg = <0x00500000 0x4000>;
};
ahb {
};
dbgu: serial@ffffee00 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
};
usb1: gadget@fff78000 {
- compatible = "atmel,at91rm9200-udc";
+ compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
};
dbgu: serial@ffffee00 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
};
dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
};
dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
};
dbgu: serial@fffff200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&usb>, <&udphs_clk>;
+ clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
};
dbgu: serial@ffffee00 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
- atmel,idle-halt;
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2c0 = &i2c0;
i2c2 = &i2c2;
};
cpus {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
lcdck: lcdck {
#clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
+ reg = <3>;
+ clocks = <&mck>;
};
smdck: smdck {
reg = <50>;
};
- lcd_clk: lcd_clk {
+ lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};
};
dbgu: serial@fc069000 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfc069000 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
+CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
#endif
-/* Keep in sync with mach-at91/include/mach/hardware.h */
+#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
+#else
+#define AT91_IO_P2V(x) (x)
+#endif
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
select GENERIC_CLOCKEVENTS
select MEMORY
select ATMEL_SDRAMC
- select PHYLIB if NETDEVICES
+ select SRAM if PM
menu "Atmel AT91 System-on-Chip"
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USB_CLK
+ select MIGHT_HAVE_PCI
+ select SRAM if PM
config SOC_AT91SAM9
bool "AT91SAM9"
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
+ select SRAM if PM
help
Select this if you are using one of those Atmel SoC:
AT91SAM9260
comment "AT91 Feature Selections"
-config AT91_SLOW_CLOCK
- bool "Suspend-to-RAM disables main oscillator"
- select SRAM
- depends on SUSPEND
- help
- Select this if you want Suspend-to-RAM to save the most power
- possible (without powering off the CPU) by disabling the PLLs
- and main oscillator so that only the 32 KiHz clock is available.
-
- When only that slow-clock is available, some peripherals lose
- functionality. Many can't issue wakeup events unless faster
- clocks are available. Some lose their operating state and
- need to be completely re-initialized.
-
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
# Makefile for the linux kernel.
#
-obj-y := setup.o
+obj-y := soc.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# Power Management
obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
+obj-$(CONFIG_PM) += pm_suspend.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
* Licensed under GPLv2 or later.
*/
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/clk-provider.h>
#include <linux/of.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include <mach/at91_st.h>
#include "generic.h"
+#include "soc.h"
+
+static const struct at91_soc rm9200_socs[] = {
+ AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
+ { /* sentinel */ },
+};
static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
{
static void __init at91rm9200_dt_device_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ struct soc_device *soc;
+ struct device *soc_dev = NULL;
+
+ soc = at91_soc_init(rm9200_socs);
+ if (soc != NULL)
+ soc_dev = soc_device_to_device(soc);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91rm9200_pm_init();
}
-
-
static const char *at91rm9200_dt_board_compat[] __initconst = {
"atmel,at91rm9200",
NULL
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
.init_time = at91rm9200_dt_timer_init,
- .map_io = at91_map_io,
.init_machine = at91rm9200_dt_device_init,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END
* Licensed under GPLv2 or later.
*/
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
#include <linux/of.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-#include <asm/system_misc.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
#include "generic.h"
+#include "soc.h"
-static void __init at91sam9_dt_device_init(void)
+static const struct at91_soc at91sam9_socs[] = {
+ AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
+ AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
+ AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
+ AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
+ AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
+ "at91sam9m11", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
+ "at91sam9m10", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
+ "at91sam9g46", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
+ "at91sam9g45", "at91sam9g45"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
+ "at91sam9g15", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
+ "at91sam9g35", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
+ "at91sam9x35", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
+ "at91sam9g25", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
+ "at91sam9x25", "at91sam9x5"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
+ "at91sam9cn12", "at91sam9n12"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
+ "at91sam9n12", "at91sam9n12"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
+ "at91sam9cn11", "at91sam9n12"),
+ AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
+ AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
+ AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
+ { /* sentinel */ },
+};
+
+static void __init at91sam9_common_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ struct soc_device *soc;
+ struct device *soc_dev = NULL;
+
+ soc = at91_soc_init(at91sam9_socs);
+ if (soc != NULL)
+ soc_dev = soc_device_to_device(soc);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91sam9_idle;
+}
+
+static void __init at91sam9_dt_device_init(void)
+{
+ at91sam9_common_init();
at91sam9260_pm_init();
}
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
- .map_io = at91_map_io,
.init_machine = at91sam9_dt_device_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
static void __init at91sam9g45_dt_device_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- arm_pm_idle = at91sam9_idle;
+ at91sam9_common_init();
at91sam9g45_pm_init();
}
DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
/* Maintainer: Atmel */
- .map_io = at91_map_io,
.init_machine = at91sam9g45_dt_device_init,
.dt_compat = at91sam9g45_board_compat,
MACHINE_END
static void __init at91sam9x5_dt_device_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- arm_pm_idle = at91sam9_idle;
+ at91sam9_common_init();
at91sam9x5_pm_init();
}
DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
- .map_io = at91_map_io,
.init_machine = at91sam9x5_dt_device_init,
.dt_compat = at91sam9x5_board_compat,
MACHINE_END
extern void at91rm9200_idle(void);
extern void at91sam9_idle(void);
-/* Matrix */
-extern void at91_ioremap_matrix(u32 base_addr);
-
-
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);
+++ /dev/null
-/*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#ifndef __MACH_AT91_MATRIX_H__
-#define __MACH_AT91_MATRIX_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_matrix_base;
-
-#define at91_matrix_read(field) \
- __raw_readl(at91_matrix_base + field)
-
-#define at91_matrix_write(field, value) \
- __raw_writel(value, at91_matrix_base + field)
-
-#else
-.extern at91_matrix_base
-#endif
-
-#endif /* __MACH_AT91_MATRIX_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
- *
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
- *
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_ITCM_64 (7 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-
-#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */
-#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
- *
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-
-#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-
-#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */
-#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
-#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
-
-#endif
+++ /dev/null
-/*
- * Matrix-centric header file for the AT91SAM9G45 family
- *
- * Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_MATRIX_H
-#define AT91SAM9G45_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
-#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
-#define AT91_MATRIX_ULBT_128 (7 << 0)
-
-#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-
-#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
-#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
-#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
-
-#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */
-#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
-#define AT91C_VDEC_SEL_OFF (0 << 0)
-#define AT91C_VDEC_SEL_ON (1 << 0)
-
-#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
-#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
-#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
-#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
-#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
-#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
-#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
-
-#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */
-#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
-#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
-#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
-#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */
-#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
-#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
-#define AT91_MATRIX_WPSR_WPV (1 << 0)
-#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
-
-#endif
+++ /dev/null
-/*
- * Matrix-centric header file for the AT91SAM9N12
- *
- * Copyright (C) 2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _AT91SAM9N12_MATRIX_H_
-#define _AT91SAM9N12_MATRIX_H_
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
-#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
-#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
-#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
-#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
-#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
-#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
-#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
-#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
-#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
-#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
-#define AT91_MATRIX_MP_OFF (0 << 25)
-#define AT91_MATRIX_MP_ON (1 << 25)
-
-#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
-#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
-#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
-#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
-#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
-#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
-#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
-#define AT91_MATRIX_WPSR_WPV (1 << 0)
-#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-
-#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-
-#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
-
-#endif
+++ /dev/null
-/*
- * Matrix-centric header file for the AT91SAM9x5 family
- *
- * Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_MATRIX_H
-#define AT91SAM9X5_MATRIX_H
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
-#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
-#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
-#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
-#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
-#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
-#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
-#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
-#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
-#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
-#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
-#define AT91_MATRIX_MP_OFF (0 << 25)
-#define AT91_MATRIX_MP_ON (1 << 25)
-
-#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
-#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
-#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
-#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
-#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
-#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
-#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
-#define AT91_MATRIX_WPSR_WPV (1 << 0)
-#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/io.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-#define __io(a) __typesafe_io(a)
-
-#endif
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
+#include <asm/fncpy.h>
+#include <asm/cacheflush.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
int memctrl;
} at91_pm_data;
-static void (*at91_pm_standby)(void);
void __iomem *at91_ramc_base[2];
static int at91_pm_valid_state(suspend_state_t state)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
-#ifdef CONFIG_AT91_SLOW_CLOCK
-extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
-extern u32 at91_slow_clock_sz;
-#endif
+extern u32 at91_pm_suspend_in_sram_sz;
+
+static void at91_pm_suspend(suspend_state_t state)
+{
+ unsigned int pm_data = at91_pm_data.memctrl;
+
+ pm_data |= (state == PM_SUSPEND_MEM) ?
+ AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+
+ flush_cache_all();
+ outer_disable();
+
+ at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
+ at91_ramc_base[1], pm_data);
+
+ outer_resume();
+}
static int at91_pm_enter(suspend_state_t state)
{
at91_pinctrl_gpio_suspend();
switch (state) {
+ /*
+ * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+ * drivers must suspend more deeply, the master clock switches
+ * to the clk32k and turns off the main oscillator
+ */
+ case PM_SUSPEND_MEM:
/*
- * Suspend-to-RAM is like STANDBY plus slow clock mode, so
- * drivers must suspend more deeply: only the master clock
- * controller may be using the main oscillator.
+ * Ensure that clocks are in a valid state.
*/
- case PM_SUSPEND_MEM:
- /*
- * Ensure that clocks are in a valid state.
- */
- if (!at91_pm_verify_clocks())
- goto error;
-
- /*
- * Enter slow clock mode by switching over to clk32k and
- * turning off the main oscillator; reverse on wakeup.
- */
- if (slow_clock) {
-#ifdef CONFIG_AT91_SLOW_CLOCK
- /* copy slow_clock handler to SRAM, and call it */
- memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-#endif
- slow_clock(at91_pmc_base, at91_ramc_base[0],
- at91_ramc_base[1],
- at91_pm_data.memctrl);
- break;
- } else {
- pr_info("AT91: PM - no slow clock mode enabled ...\n");
- /* FALLTHROUGH leaving master clock alone */
- }
+ if (!at91_pm_verify_clocks())
+ goto error;
- /*
- * STANDBY mode has *all* drivers suspended; ignores irqs not
- * marked as 'wakeup' event sources; and reduces DRAM power.
- * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
- * nothing fancy done with main or cpu clocks.
- */
- case PM_SUSPEND_STANDBY:
- /*
- * NOTE: the Wait-for-Interrupt instruction needs to be
- * in icache so no SDRAM accesses are needed until the
- * wakeup IRQ occurs and self-refresh is terminated.
- * For ARM 926 based chips, this requirement is weaker
- * as at91sam9 can access a RAM in self-refresh mode.
- */
- if (at91_pm_standby)
- at91_pm_standby();
- break;
+ at91_pm_suspend(state);
- case PM_SUSPEND_ON:
- cpu_do_idle();
- break;
+ break;
- default:
- pr_debug("AT91: PM - bogus suspend state %d\n", state);
- goto error;
+ /*
+ * STANDBY mode has *all* drivers suspended; ignores irqs not
+ * marked as 'wakeup' event sources; and reduces DRAM power.
+ * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
+ * nothing fancy done with main or cpu clocks.
+ */
+ case PM_SUSPEND_STANDBY:
+ at91_pm_suspend(state);
+ break;
+
+ case PM_SUSPEND_ON:
+ cpu_do_idle();
+ break;
+
+ default:
+ pr_debug("AT91: PM - bogus suspend state %d\n", state);
+ goto error;
}
error:
.name = "cpuidle-at91",
};
-void at91_pm_set_standby(void (*at91_standby)(void))
+static void at91_pm_set_standby(void (*at91_standby)(void))
{
- if (at91_standby) {
+ if (at91_standby)
at91_cpuidle_device.dev.platform_data = at91_standby;
- at91_pm_standby = at91_standby;
- }
}
static const struct of_device_id ramc_ids[] __initconst = {
at91_pm_set_standby(standby);
}
-#ifdef CONFIG_AT91_SLOW_CLOCK
static void __init at91_pm_sram_init(void)
{
struct gen_pool *sram_pool;
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
- struct platform_device *pdev;
+ struct platform_device *pdev = NULL;
- node = of_find_compatible_node(NULL, NULL, "mmio-sram");
- if (!node) {
- pr_warn("%s: failed to find sram node!\n", __func__);
- return;
+ for_each_compatible_node(node, NULL, "mmio-sram") {
+ pdev = of_find_device_by_node(node);
+ if (pdev) {
+ of_node_put(node);
+ break;
+ }
}
- pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
- goto put_node;
+ return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
- goto put_node;
+ return;
}
- sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
+ sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
if (!sram_base) {
- pr_warn("%s: unable to alloc ocram!\n", __func__);
- goto put_node;
+ pr_warn("%s: unable to alloc sram!\n", __func__);
+ return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
- slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
+ at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
+ at91_pm_suspend_in_sram_sz, false);
+ if (!at91_suspend_sram_fn) {
+ pr_warn("SRAM: Could not map\n");
+ return;
+ }
-put_node:
- of_node_put(node);
+ /* Copy the pm suspend handler to SRAM */
+ at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
+ &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
-#endif
-
static void __init at91_pm_init(void)
{
-#ifdef CONFIG_AT91_SLOW_CLOCK
at91_pm_sram_init();
-#endif
-
- pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
- suspend_set_ops(&at91_pm_ops);
+ if (at91_suspend_sram_fn)
+ suspend_set_ops(&at91_pm_ops);
+ else
+ pr_info("AT91: PM not supported, due to no SRAM allocated\n");
}
void __init at91rm9200_pm_init(void)
#include <mach/at91_ramc.h>
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
+#define AT91_PM_MEMTYPE_MASK 0x0f
+
+#define AT91_PM_MODE_OFFSET 4
+#define AT91_PM_MODE_MASK 0x01
+#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
+
+#define AT91_PM_SLOW_CLOCK 0x01
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
* still in self-refresh is "not recommended", but seems to work.
*/
+#ifndef __ASSEMBLY__
static inline void at91rm9200_standby(void)
{
u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
- : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+ : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}
}
#endif
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/pm_slow_clock.S
- *
- * Copyright (C) 2006 Savin Zlobec
- *
- * AT91SAM9 support:
- * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/linkage.h>
-#include <linux/clk/at91_pmc.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-
-/*
- * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
- * clock during suspend by adjusting its prescalar and divisor.
- * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
- * are errata regarding adjusting the prescalar and divisor.
- */
-#undef SLOWDOWN_MASTER_CLOCK
-
-#define MCKRDY_TIMEOUT 1000
-#define MOSCRDY_TIMEOUT 1000
-#define PLLALOCK_TIMEOUT 1000
-#define PLLBLOCK_TIMEOUT 1000
-
-pmc .req r0
-sdramc .req r1
-ramc1 .req r2
-memctrl .req r3
-tmp1 .req r4
-tmp2 .req r5
-
-/*
- * Wait until master clock is ready (after switching master clock source)
- */
- .macro wait_mckrdy
- mov tmp2, #MCKRDY_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_MCKRDY
- beq 1b
-2:
- .endm
-
-/*
- * Wait until master oscillator has stabilized.
- */
- .macro wait_moscrdy
- mov tmp2, #MOSCRDY_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_MOSCS
- beq 1b
-2:
- .endm
-
-/*
- * Wait until PLLA has locked.
- */
- .macro wait_pllalock
- mov tmp2, #PLLALOCK_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_LOCKA
- beq 1b
-2:
- .endm
-
-/*
- * Wait until PLLB has locked.
- */
- .macro wait_pllblock
- mov tmp2, #PLLBLOCK_TIMEOUT
-1: sub tmp2, tmp2, #1
- cmp tmp2, #0
- beq 2f
- ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_LOCKB
- beq 1b
-2:
- .endm
-
- .text
-
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
- * void __iomem *ramc1, int memctrl)
- */
-ENTRY(at91_slow_clock)
- /* Save registers on stack */
- stmfd sp!, {r4 - r12, lr}
-
- /*
- * Register usage:
- * R0 = Base address of AT91_PMC
- * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
- * R2 = Base address of second RAM Controller or 0 if not present
- * R3 = Memory controller
- * R4 = temporary register
- * R5 = temporary register
- */
-
- /* Drain write buffer */
- mov tmp1, #0
- mcr p15, 0, tmp1, c7, c10, 4
-
- cmp memctrl, #AT91_MEMCTRL_MC
- bne ddr_sr_enable
-
- /*
- * at91rm9200 Memory controller
- */
- /* Put SDRAM in self-refresh mode */
- mov tmp1, #1
- str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
- b sdr_sr_done
-
- /*
- * DDRSDR Memory controller
- */
-ddr_sr_enable:
- cmp memctrl, #AT91_MEMCTRL_DDRSDR
- bne sdr_sr_enable
-
- /* prepare for DDRAM self-refresh mode */
- ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
- str tmp1, .saved_sam9_lpr
- bic tmp1, #AT91_DDRSDRC_LPCB
- orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
- /* figure out if we use the second ram controller */
- cmp ramc1, #0
- ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
- strne tmp2, .saved_sam9_lpr1
- bicne tmp2, #AT91_DDRSDRC_LPCB
- orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
- /* Enable DDRAM self-refresh mode */
- str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
- strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
- b sdr_sr_done
-
- /*
- * SDRAMC Memory controller
- */
-sdr_sr_enable:
- /* Enable SDRAM self-refresh mode */
- ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
- str tmp1, .saved_sam9_lpr
-
- bic tmp1, #AT91_SDRAMC_LPCB
- orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
- str tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-sdr_sr_done:
- /* Save Master clock setting */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
- str tmp1, .saved_mckr
-
- /*
- * Set the Master clock source to slow clock
- */
- bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
-
- wait_mckrdy
-
-#ifdef SLOWDOWN_MASTER_CLOCK
- /*
- * Set the Master Clock PRES and MDIV fields.
- *
- * See AT91RM9200 errata #27 and #28 for details.
- */
- mov tmp1, #0
- str tmp1, [pmc, #AT91_PMC_MCKR]
-
- wait_mckrdy
-#endif
-
- /* Save PLLA setting and disable it */
- ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
- str tmp1, .saved_pllar
-
- mov tmp1, #AT91_PMC_PLLCOUNT
- orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
- str tmp1, [pmc, #AT91_CKGR_PLLAR]
-
- /* Save PLLB setting and disable it */
- ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
- str tmp1, .saved_pllbr
-
- mov tmp1, #AT91_PMC_PLLCOUNT
- str tmp1, [pmc, #AT91_CKGR_PLLBR]
-
- /* Turn off the main oscillator */
- ldr tmp1, [pmc, #AT91_CKGR_MOR]
- bic tmp1, tmp1, #AT91_PMC_MOSCEN
- str tmp1, [pmc, #AT91_CKGR_MOR]
-
- /* Wait for interrupt */
- mcr p15, 0, tmp1, c7, c0, 4
-
- /* Turn on the main oscillator */
- ldr tmp1, [pmc, #AT91_CKGR_MOR]
- orr tmp1, tmp1, #AT91_PMC_MOSCEN
- str tmp1, [pmc, #AT91_CKGR_MOR]
-
- wait_moscrdy
-
- /* Restore PLLB setting */
- ldr tmp1, .saved_pllbr
- str tmp1, [pmc, #AT91_CKGR_PLLBR]
-
- tst tmp1, #(AT91_PMC_MUL & 0xff0000)
- bne 1f
- tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
- beq 2f
-1:
- wait_pllblock
-2:
-
- /* Restore PLLA setting */
- ldr tmp1, .saved_pllar
- str tmp1, [pmc, #AT91_CKGR_PLLAR]
-
- tst tmp1, #(AT91_PMC_MUL & 0xff0000)
- bne 3f
- tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
- beq 4f
-3:
- wait_pllalock
-4:
-
-#ifdef SLOWDOWN_MASTER_CLOCK
- /*
- * First set PRES if it was not 0,
- * than set CSS and MDIV fields.
- *
- * See AT91RM9200 errata #27 and #28 for details.
- */
- ldr tmp1, .saved_mckr
- tst tmp1, #AT91_PMC_PRES
- beq 2f
- and tmp1, tmp1, #AT91_PMC_PRES
- str tmp1, [pmc, #AT91_PMC_MCKR]
-
- wait_mckrdy
-#endif
-
- /*
- * Restore master clock setting
- */
-2: ldr tmp1, .saved_mckr
- str tmp1, [pmc, #AT91_PMC_MCKR]
-
- wait_mckrdy
-
- /*
- * at91rm9200 Memory controller
- * Do nothing - self-refresh is automatically disabled.
- */
- cmp memctrl, #AT91_MEMCTRL_MC
- beq ram_restored
-
- /*
- * DDRSDR Memory controller
- */
- cmp memctrl, #AT91_MEMCTRL_DDRSDR
- bne sdr_en_restore
- /* Restore LPR on AT91 with DDRAM */
- ldr tmp1, .saved_sam9_lpr
- str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
- /* if we use the second ram controller */
- cmp ramc1, #0
- ldrne tmp2, .saved_sam9_lpr1
- strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
- b ram_restored
-
- /*
- * SDRAMC Memory controller
- */
-sdr_en_restore:
- /* Restore LPR on AT91 with SDRAM */
- ldr tmp1, .saved_sam9_lpr
- str tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-ram_restored:
- /* Restore registers, and return */
- ldmfd sp!, {r4 - r12, pc}
-
-
-.saved_mckr:
- .word 0
-
-.saved_pllar:
- .word 0
-
-.saved_pllbr:
- .word 0
-
-.saved_sam9_lpr:
- .word 0
-
-.saved_sam9_lpr1:
- .word 0
-
-ENTRY(at91_slow_clock_sz)
- .word .-at91_slow_clock
--- /dev/null
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ * Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ramc.h>
+#include "pm.h"
+
+#define SRAMC_SELF_FRESH_ACTIVE 0x01
+#define SRAMC_SELF_FRESH_EXIT 0x00
+
+pmc .req r0
+tmp1 .req r4
+tmp2 .req r5
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+ .macro wait_mckrdy
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MCKRDY
+ beq 1b
+ .endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+ .macro wait_moscrdy
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCS
+ beq 1b
+ .endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+ .macro wait_pllalock
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_LOCKA
+ beq 1b
+ .endm
+
+/*
+ * Put the processor to enter the idle state
+ */
+ .macro at91_cpu_idle
+
+#if defined(CONFIG_CPU_V7)
+ mov tmp1, #AT91_PMC_PCK
+ str tmp1, [pmc, #AT91_PMC_SCDR]
+
+ dsb
+
+ wfi @ Wait For Interrupt
+#else
+ mcr p15, 0, tmp1, c7, c0, 4
+#endif
+
+ .endm
+
+ .text
+
+ .arm
+
+/*
+ * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
+ * void __iomem *ramc1, int memctrl)
+ * @input param:
+ * @r0: base address of AT91_PMC
+ * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+ * @r2: base address of second SDRAM Controller or 0 if not present
+ * @r3: pm information
+ */
+ENTRY(at91_pm_suspend_in_sram)
+ /* Save registers on stack */
+ stmfd sp!, {r4 - r12, lr}
+
+ /* Drain write buffer */
+ mov tmp1, #0
+ mcr p15, 0, tmp1, c7, c10, 4
+
+ str r0, .pmc_base
+ str r1, .sramc_base
+ str r2, .sramc1_base
+
+ and r0, r3, #AT91_PM_MEMTYPE_MASK
+ str r0, .memtype
+
+ lsr r0, r3, #AT91_PM_MODE_OFFSET
+ and r0, r0, #AT91_PM_MODE_MASK
+ str r0, .pm_mode
+
+ /* Active the self-refresh mode */
+ mov r0, #SRAMC_SELF_FRESH_ACTIVE
+ bl at91_sramc_self_refresh
+
+ ldr r0, .pm_mode
+ tst r0, #AT91_PM_SLOW_CLOCK
+ beq skip_disable_main_clock
+
+ ldr pmc, .pmc_base
+
+ /* Save Master clock setting */
+ ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, .saved_mckr
+
+ /*
+ * Set the Master clock source to slow clock
+ */
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, #AT91_PMC_MCKR]
+
+ wait_mckrdy
+
+ /* Save PLLA setting and disable it */
+ ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
+ str tmp1, .saved_pllar
+
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+ /* Turn off the main oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCEN
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+skip_disable_main_clock:
+ ldr pmc, .pmc_base
+
+ /* Wait for interrupt */
+ at91_cpu_idle
+
+ ldr r0, .pm_mode
+ tst r0, #AT91_PM_SLOW_CLOCK
+ beq skip_enable_main_clock
+
+ ldr pmc, .pmc_base
+
+ /* Turn on the main oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCEN
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ wait_moscrdy
+
+ /* Restore PLLA setting */
+ ldr tmp1, .saved_pllar
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+ tst tmp1, #(AT91_PMC_MUL & 0xff0000)
+ bne 3f
+ tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
+ beq 4f
+3:
+ wait_pllalock
+4:
+
+ /*
+ * Restore master clock setting
+ */
+ ldr tmp1, .saved_mckr
+ str tmp1, [pmc, #AT91_PMC_MCKR]
+
+ wait_mckrdy
+
+skip_enable_main_clock:
+ /* Exit the self-refresh mode */
+ mov r0, #SRAMC_SELF_FRESH_EXIT
+ bl at91_sramc_self_refresh
+
+ /* Restore registers, and return */
+ ldmfd sp!, {r4 - r12, pc}
+ENDPROC(at91_pm_suspend_in_sram)
+
+/*
+ * void at91_sramc_self_refresh(unsigned int is_active)
+ *
+ * @input param:
+ * @r0: 1 - active self-refresh mode
+ * 0 - exit self-refresh mode
+ * register usage:
+ * @r1: memory type
+ * @r2: base address of the sram controller
+ */
+
+ENTRY(at91_sramc_self_refresh)
+ ldr r1, .memtype
+ ldr r2, .sramc_base
+
+ cmp r1, #AT91_MEMCTRL_MC
+ bne ddrc_sf
+
+ /*
+ * at91rm9200 Memory controller
+ */
+
+ /*
+ * For exiting the self-refresh mode, do nothing,
+ * automatically exit the self-refresh mode.
+ */
+ tst r0, #SRAMC_SELF_FRESH_ACTIVE
+ beq exit_sramc_sf
+
+ /* Active SDRAM self-refresh mode */
+ mov r3, #1
+ str r3, [r2, #AT91RM9200_SDRAMC_SRR]
+ b exit_sramc_sf
+
+ddrc_sf:
+ cmp r1, #AT91_MEMCTRL_DDRSDR
+ bne sdramc_sf
+
+ /*
+ * DDR Memory controller
+ */
+ tst r0, #SRAMC_SELF_FRESH_ACTIVE
+ beq ddrc_exit_sf
+
+ /* LPDDR1 --> force DDR2 mode during self-refresh */
+ ldr r3, [r2, #AT91_DDRSDRC_MDR]
+ str r3, .saved_sam9_mdr
+ bic r3, r3, #~AT91_DDRSDRC_MD
+ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+ ldreq r3, [r2, #AT91_DDRSDRC_MDR]
+ biceq r3, r3, #AT91_DDRSDRC_MD
+ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
+ streq r3, [r2, #AT91_DDRSDRC_MDR]
+
+ /* Active DDRC self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR]
+ str r3, .saved_sam9_lpr
+ bic r3, r3, #AT91_DDRSDRC_LPCB
+ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+ /* If using the 2nd ddr controller */
+ ldr r2, .sramc1_base
+ cmp r2, #0
+ beq no_2nd_ddrc
+
+ ldr r3, [r2, #AT91_DDRSDRC_MDR]
+ str r3, .saved_sam9_mdr1
+ bic r3, r3, #~AT91_DDRSDRC_MD
+ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+ ldreq r3, [r2, #AT91_DDRSDRC_MDR]
+ biceq r3, r3, #AT91_DDRSDRC_MD
+ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
+ streq r3, [r2, #AT91_DDRSDRC_MDR]
+
+ /* Active DDRC self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR]
+ str r3, .saved_sam9_lpr1
+ bic r3, r3, #AT91_DDRSDRC_LPCB
+ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+no_2nd_ddrc:
+ b exit_sramc_sf
+
+ddrc_exit_sf:
+ /* Restore MDR in case of LPDDR1 */
+ ldr r3, .saved_sam9_mdr
+ str r3, [r2, #AT91_DDRSDRC_MDR]
+ /* Restore LPR on AT91 with DDRAM */
+ ldr r3, .saved_sam9_lpr
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+ /* If using the 2nd ddr controller */
+ ldr r2, .sramc1_base
+ cmp r2, #0
+ ldrne r3, .saved_sam9_mdr1
+ strne r3, [r2, #AT91_DDRSDRC_MDR]
+ ldrne r3, .saved_sam9_lpr1
+ strne r3, [r2, #AT91_DDRSDRC_LPR]
+
+ b exit_sramc_sf
+
+ /*
+ * SDRAMC Memory controller
+ */
+sdramc_sf:
+ tst r0, #SRAMC_SELF_FRESH_ACTIVE
+ beq sdramc_exit_sf
+
+ /* Active SDRAMC self-refresh mode */
+ ldr r3, [r2, #AT91_SDRAMC_LPR]
+ str r3, .saved_sam9_lpr
+ bic r3, r3, #AT91_SDRAMC_LPCB
+ orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_SDRAMC_LPR]
+
+sdramc_exit_sf:
+ ldr r3, .saved_sam9_lpr
+ str r3, [r2, #AT91_SDRAMC_LPR]
+
+exit_sramc_sf:
+ mov pc, lr
+ENDPROC(at91_sramc_self_refresh)
+
+.pmc_base:
+ .word 0
+.sramc_base:
+ .word 0
+.sramc1_base:
+ .word 0
+.memtype:
+ .word 0
+.pm_mode:
+ .word 0
+.saved_mckr:
+ .word 0
+.saved_pllar:
+ .word 0
+.saved_sam9_lpr:
+ .word 0
+.saved_sam9_lpr1:
+ .word 0
+.saved_sam9_mdr:
+ .word 0
+.saved_sam9_mdr1:
+ .word 0
+
+ENTRY(at91_pm_suspend_in_sram_sz)
+ .word .-at91_pm_suspend_in_sram
* Licensed under GPLv2 or later.
*/
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/micrel_phy.h>
#include <linux/of.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/clk-provider.h>
-#include <linux/phy.h>
-#include <mach/hardware.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
+#include <asm/system_misc.h>
-static int ksz8081_phy_fixup(struct phy_device *phy)
-{
- int value;
+#include <mach/hardware.h>
- value = phy_read(phy, 0x16);
- value &= ~0x20;
- phy_write(phy, 0x16, value);
+#include "generic.h"
+#include "soc.h"
- return 0;
-}
+static const struct at91_soc sama5_socs[] = {
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
+ "sama5d31", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
+ "sama5d33", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
+ "sama5d34", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
+ "sama5d35", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
+ "sama5d36", "sama5d3"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
+ "sama5d41", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
+ "sama5d42", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
+ "sama5d43", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
+ "sama5d44", "sama5d4"),
+ { /* sentinel */ },
+};
static void __init sama5_dt_device_init(void)
{
- if (of_machine_is_compatible("atmel,sama5d4ek") &&
- IS_ENABLED(CONFIG_PHYLIB)) {
- phy_register_fixup_for_id("fc028000.etherne:00",
- ksz8081_phy_fixup);
- }
+ struct soc_device *soc;
+ struct device *soc_dev = NULL;
+
+ soc = at91_soc_init(sama5_socs);
+ if (soc != NULL)
+ soc_dev = soc_device_to_device(soc);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
at91sam9x5_pm_init();
}
DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
- .map_io = at91_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
-static struct map_desc at91_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
- .length = SZ_512,
- .type = MT_DEVICE,
- },
- {
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
- .length = SZ_512,
- .type = MT_DEVICE,
- },
- { /* On sama5d4, we use USART3 as serial console */
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
- { /* A bunch of peripheral with fine grained IO space */
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
- .length = SZ_2K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init sama5_alt_map_io(void)
-{
- at91_alt_map_io();
- iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
-}
-
static const char *sama5_alt_dt_board_compat[] __initconst = {
"atmel,sama5d4",
NULL
DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
- .map_io = sama5_alt_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_alt_dt_board_compat,
.l2c_aux_mask = ~0UL,
+++ /dev/null
-/*
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#define pr_fmt(fmt) "AT91: " fmt
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-#include <mach/at91_dbgu.h>
-
-#include "generic.h"
-#include "pm.h"
-
-struct at91_socinfo at91_soc_initdata;
-EXPORT_SYMBOL(at91_soc_initdata);
-
-static struct map_desc at91_io_desc __initdata __maybe_unused = {
- .virtual = (unsigned long)AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
-};
-
-static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
- .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS),
- .length = 24 * SZ_1K,
- .type = MT_DEVICE,
-};
-
-static void __init soc_detect(u32 dbgu_base)
-{
- u32 cidr, socid;
-
- cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
- socid = cidr & ~AT91_CIDR_VERSION;
-
- switch (socid) {
- case ARCH_ID_AT91RM9200:
- at91_soc_initdata.type = AT91_SOC_RM9200;
- if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
- at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
- break;
-
- case ARCH_ID_AT91SAM9260:
- at91_soc_initdata.type = AT91_SOC_SAM9260;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- break;
-
- case ARCH_ID_AT91SAM9261:
- at91_soc_initdata.type = AT91_SOC_SAM9261;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- break;
-
- case ARCH_ID_AT91SAM9263:
- at91_soc_initdata.type = AT91_SOC_SAM9263;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- break;
-
- case ARCH_ID_AT91SAM9G20:
- at91_soc_initdata.type = AT91_SOC_SAM9G20;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- break;
-
- case ARCH_ID_AT91SAM9G45:
- at91_soc_initdata.type = AT91_SOC_SAM9G45;
- if (cidr == ARCH_ID_AT91SAM9G45ES)
- at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
- break;
-
- case ARCH_ID_AT91SAM9RL64:
- at91_soc_initdata.type = AT91_SOC_SAM9RL;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- break;
-
- case ARCH_ID_AT91SAM9X5:
- at91_soc_initdata.type = AT91_SOC_SAM9X5;
- break;
-
- case ARCH_ID_AT91SAM9N12:
- at91_soc_initdata.type = AT91_SOC_SAM9N12;
- break;
-
- case ARCH_ID_SAMA5:
- at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
- if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
- at91_soc_initdata.type = AT91_SOC_SAMA5D3;
- }
- break;
- }
-
- /* at91sam9g10 */
- if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
- at91_soc_initdata.type = AT91_SOC_SAM9G10;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- }
- /* at91sam9xe */
- else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
- at91_soc_initdata.type = AT91_SOC_SAM9260;
- at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
- }
-
- if (!at91_soc_is_detected())
- return;
-
- at91_soc_initdata.cidr = cidr;
-
- /* sub version of soc */
- if (!at91_soc_initdata.exid)
- at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
- if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
- switch (at91_soc_initdata.exid) {
- case ARCH_EXID_AT91SAM9M10:
- at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
- break;
- case ARCH_EXID_AT91SAM9G46:
- at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
- break;
- case ARCH_EXID_AT91SAM9M11:
- at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
- break;
- }
- }
-
- if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
- switch (at91_soc_initdata.exid) {
- case ARCH_EXID_AT91SAM9G15:
- at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
- break;
- case ARCH_EXID_AT91SAM9G35:
- at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
- break;
- case ARCH_EXID_AT91SAM9X35:
- at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
- break;
- case ARCH_EXID_AT91SAM9G25:
- at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
- break;
- case ARCH_EXID_AT91SAM9X25:
- at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
- break;
- }
- }
-
- if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
- switch (at91_soc_initdata.exid) {
- case ARCH_EXID_SAMA5D31:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
- break;
- case ARCH_EXID_SAMA5D33:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
- break;
- case ARCH_EXID_SAMA5D34:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
- break;
- case ARCH_EXID_SAMA5D35:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
- break;
- case ARCH_EXID_SAMA5D36:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
- break;
- }
- }
-}
-
-static void __init alt_soc_detect(u32 dbgu_base)
-{
- u32 cidr, socid;
-
- /* SoC ID */
- cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
- socid = cidr & ~AT91_CIDR_VERSION;
-
- switch (socid) {
- case ARCH_ID_SAMA5:
- at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
- if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
- at91_soc_initdata.type = AT91_SOC_SAMA5D3;
- } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
- at91_soc_initdata.type = AT91_SOC_SAMA5D4;
- }
- break;
- }
-
- if (!at91_soc_is_detected())
- return;
-
- at91_soc_initdata.cidr = cidr;
-
- /* sub version of soc */
- if (!at91_soc_initdata.exid)
- at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
- if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
- switch (at91_soc_initdata.exid) {
- case ARCH_EXID_SAMA5D41:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
- break;
- case ARCH_EXID_SAMA5D42:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
- break;
- case ARCH_EXID_SAMA5D43:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
- break;
- case ARCH_EXID_SAMA5D44:
- at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
- break;
- }
- }
-}
-
-static const char *soc_name[] = {
- [AT91_SOC_RM9200] = "at91rm9200",
- [AT91_SOC_SAM9260] = "at91sam9260",
- [AT91_SOC_SAM9261] = "at91sam9261",
- [AT91_SOC_SAM9263] = "at91sam9263",
- [AT91_SOC_SAM9G10] = "at91sam9g10",
- [AT91_SOC_SAM9G20] = "at91sam9g20",
- [AT91_SOC_SAM9G45] = "at91sam9g45",
- [AT91_SOC_SAM9RL] = "at91sam9rl",
- [AT91_SOC_SAM9X5] = "at91sam9x5",
- [AT91_SOC_SAM9N12] = "at91sam9n12",
- [AT91_SOC_SAMA5D3] = "sama5d3",
- [AT91_SOC_SAMA5D4] = "sama5d4",
- [AT91_SOC_UNKNOWN] = "Unknown",
-};
-
-const char *at91_get_soc_type(struct at91_socinfo *c)
-{
- return soc_name[c->type];
-}
-EXPORT_SYMBOL(at91_get_soc_type);
-
-static const char *soc_subtype_name[] = {
- [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
- [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
- [AT91_SOC_SAM9XE] = "at91sam9xe",
- [AT91_SOC_SAM9G45ES] = "at91sam9g45es",
- [AT91_SOC_SAM9M10] = "at91sam9m10",
- [AT91_SOC_SAM9G46] = "at91sam9g46",
- [AT91_SOC_SAM9M11] = "at91sam9m11",
- [AT91_SOC_SAM9G15] = "at91sam9g15",
- [AT91_SOC_SAM9G35] = "at91sam9g35",
- [AT91_SOC_SAM9X35] = "at91sam9x35",
- [AT91_SOC_SAM9G25] = "at91sam9g25",
- [AT91_SOC_SAM9X25] = "at91sam9x25",
- [AT91_SOC_SAMA5D31] = "sama5d31",
- [AT91_SOC_SAMA5D33] = "sama5d33",
- [AT91_SOC_SAMA5D34] = "sama5d34",
- [AT91_SOC_SAMA5D35] = "sama5d35",
- [AT91_SOC_SAMA5D36] = "sama5d36",
- [AT91_SOC_SAMA5D41] = "sama5d41",
- [AT91_SOC_SAMA5D42] = "sama5d42",
- [AT91_SOC_SAMA5D43] = "sama5d43",
- [AT91_SOC_SAMA5D44] = "sama5d44",
- [AT91_SOC_SUBTYPE_NONE] = "None",
- [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
-};
-
-const char *at91_get_soc_subtype(struct at91_socinfo *c)
-{
- return soc_subtype_name[c->subtype];
-}
-EXPORT_SYMBOL(at91_get_soc_subtype);
-
-void __init at91_map_io(void)
-{
- /* Map peripherals */
- iotable_init(&at91_io_desc, 1);
-
- at91_soc_initdata.type = AT91_SOC_UNKNOWN;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
-
- soc_detect(AT91_BASE_DBGU0);
- if (!at91_soc_is_detected())
- soc_detect(AT91_BASE_DBGU1);
-
- if (!at91_soc_is_detected())
- panic(pr_fmt("Impossible to detect the SOC type"));
-
- pr_info("Detected soc type: %s\n",
- at91_get_soc_type(&at91_soc_initdata));
- if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
- pr_info("Detected soc subtype: %s\n",
- at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __init at91_alt_map_io(void)
-{
- /* Map peripherals */
- iotable_init(&at91_alt_io_desc, 1);
-
- at91_soc_initdata.type = AT91_SOC_UNKNOWN;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
-
- alt_soc_detect(AT91_BASE_DBGU2);
- if (!at91_soc_is_detected())
- panic("AT91: Impossible to detect the SOC type");
-
- pr_info("AT91: Detected soc type: %s\n",
- at91_get_soc_type(&at91_soc_initdata));
- if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
- pr_info("AT91: Detected soc subtype: %s\n",
- at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __iomem *at91_matrix_base;
-EXPORT_SYMBOL_GPL(at91_matrix_base);
-
-void __init at91_ioremap_matrix(u32 base_addr)
-{
- at91_matrix_base = ioremap(base_addr, 512);
- if (!at91_matrix_base)
- panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
-}
--- /dev/null
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#define pr_fmt(fmt) "AT91: " fmt
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include "soc.h"
+
+#define AT91_DBGU_CIDR 0x40
+#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f)
+#define AT91_DBGU_CIDR_EXT BIT(31)
+#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0
+#define AT91_DBGU_EXID 0x44
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ const struct at91_soc *soc;
+ struct soc_device *soc_dev;
+ struct device_node *np;
+ void __iomem *regs;
+ u32 cidr, exid;
+
+ np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
+ if (!np)
+ np = of_find_compatible_node(NULL, NULL,
+ "atmel,at91sam9260-dbgu");
+
+ if (!np) {
+ pr_warn("Could not find DBGU node");
+ return NULL;
+ }
+
+ regs = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!regs) {
+ pr_warn("Could not map DBGU iomem range");
+ return NULL;
+ }
+
+ cidr = readl(regs + AT91_DBGU_CIDR);
+ exid = readl(regs + AT91_DBGU_EXID);
+
+ iounmap(regs);
+
+ for (soc = socs; soc->name; soc++) {
+ if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+ continue;
+
+ if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+ break;
+ }
+
+ if (!soc->name) {
+ pr_warn("Could not find matching SoC description\n");
+ return NULL;
+ }
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return NULL;
+
+ soc_dev_attr->family = soc->family;
+ soc_dev_attr->soc_id = soc->name;
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
+ AT91_DBGU_CIDR_VERSION(cidr));
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ pr_warn("Could not register SoC device\n");
+ return NULL;
+ }
+
+ if (soc->family)
+ pr_info("Detected SoC family: %s\n", soc->family);
+ pr_info("Detected SoC: %s, revision %X\n", soc->name,
+ AT91_DBGU_CIDR_VERSION(cidr));
+
+ return soc_dev;
+}
--- /dev/null
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#ifndef __AT91_SOC_H
+#define __AT91_SOC_H
+
+#include <linux/sys_soc.h>
+
+struct at91_soc {
+ u32 cidr_match;
+ u32 exid_match;
+ const char *name;
+ const char *family;
+};
+
+#define AT91_SOC(__cidr, __exid, __name, __family) \
+ { \
+ .cidr_match = (__cidr), \
+ .exid_match = (__exid), \
+ .name = (__name), \
+ .family = (__family), \
+ }
+
+struct soc_device * __init
+at91_soc_init(const struct at91_soc *socs);
+
+#define AT91RM9200_CIDR_MATCH 0x09290780
+
+#define AT91SAM9260_CIDR_MATCH 0x019803a0
+#define AT91SAM9261_CIDR_MATCH 0x019703a0
+#define AT91SAM9263_CIDR_MATCH 0x019607a0
+#define AT91SAM9G20_CIDR_MATCH 0x019905a0
+#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0
+#define AT91SAM9G45_CIDR_MATCH 0x019b05a0
+#define AT91SAM9X5_CIDR_MATCH 0x019a05a0
+#define AT91SAM9N12_CIDR_MATCH 0x019a07a0
+
+#define AT91SAM9M11_EXID_MATCH 0x00000001
+#define AT91SAM9M10_EXID_MATCH 0x00000002
+#define AT91SAM9G46_EXID_MATCH 0x00000003
+#define AT91SAM9G45_EXID_MATCH 0x00000004
+
+#define AT91SAM9G15_EXID_MATCH 0x00000000
+#define AT91SAM9G35_EXID_MATCH 0x00000001
+#define AT91SAM9X35_EXID_MATCH 0x00000002
+#define AT91SAM9G25_EXID_MATCH 0x00000003
+#define AT91SAM9X25_EXID_MATCH 0x00000004
+
+#define AT91SAM9CN12_EXID_MATCH 0x00000005
+#define AT91SAM9N12_EXID_MATCH 0x00000006
+#define AT91SAM9CN11_EXID_MATCH 0x00000009
+
+#define AT91SAM9XE128_CIDR_MATCH 0x329973a0
+#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
+#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
+
+#define SAMA5D3_CIDR_MATCH 0x0a5c07c0
+#define SAMA5D31_EXID_MATCH 0x00444300
+#define SAMA5D33_EXID_MATCH 0x00414300
+#define SAMA5D34_EXID_MATCH 0x00414301
+#define SAMA5D35_EXID_MATCH 0x00584300
+#define SAMA5D36_EXID_MATCH 0x00004301
+
+#define SAMA5D4_CIDR_MATCH 0x0a5c07c0
+#define SAMA5D41_EXID_MATCH 0x00000001
+#define SAMA5D42_EXID_MATCH 0x00000002
+#define SAMA5D43_EXID_MATCH 0x00000003
+#define SAMA5D44_EXID_MATCH 0x00000004
+
+#endif /* __AT91_SOC_H */
config AT91_CF
tristate "AT91 CompactFlash Controller"
+ depends on PCI
depends on PCMCIA && ARCH_AT91
depends on !ARCH_MULTIPLATFORM
help
} else
cf->socket.pci_irq = nr_irqs + 1;
- /* pcmcia layer only remaps "real" memory not iospace */
- cf->socket.io_offset = (unsigned long) devm_ioremap(&pdev->dev,
- cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
- if (!cf->socket.io_offset) {
- status = -ENXIO;
+ /*
+ * pcmcia layer only remaps "real" memory not iospace
+ * io_offset is set to 0x10000 to avoid the check in static_find_io().
+ * */
+ cf->socket.io_offset = 0x10000;
+ status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS);
+ if (status)
goto fail0a;
- }
/* reserve chip-select regions */
if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) {
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
-#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
+#define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
projects / mirror_ubuntu-artful-kernel.git / commitdiff