#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define MXC_OTG_OFFSET 0
--- /dev/null
+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
+#define MXC_EHCI_TTL_ENABLED (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN (1 << 10)
+#define MXC_EHCI_IPPUE_UP (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
+
+#define MXC_USBCTRL_OFFSET 0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
+#define MXC_USBH2CTRL_OFFSET 0x14
+
+#define MX5_USBOTHER_REGS_OFFSET 0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
+
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-#define MX5_USBOTHER_REGS_OFFSET 0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
-
struct mxc_usbh_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
struct usb_phy *otg;
};
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */