rxs->noise = sc->ah->ah_noise_floor;
rxs->signal = rxs->noise + rs.rs_rssi;
- /* An rssi of 35 indicates you should be able use
- * 54 Mbps reliably. A more elaborate scheme can be used
- * here but it requires a map of SNR/throughput for each
- * possible mode used */
- rxs->qual = rs.rs_rssi * 100 / 35;
-
- /* rssi can be more than 35 though, anything above that
- * should be considered at 100% */
- if (rxs->qual > 100)
- rxs->qual = 100;
-
rxs->antenna = rs.rs_antenna;
rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
snr = rx_stats_sig_avg / rx_stats_noise_diff;
rx_status.noise = rx_status.signal -
iwl3945_calc_db_from_ratio(snr);
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
- rx_status.noise);
-
- /* If noise info not available, calculate signal quality indicator (%)
- * using just the dBm signal level. */
} else {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
}
- IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
+ rx_status.signal, rx_status.noise,
rx_stats_sig_avg, rx_stats_noise_diff);
header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
*
*****************************************************************************/
extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
extern void iwl3945_rx_replenish(void *data);
extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
}
EXPORT_SYMBOL(iwl_reply_statistics);
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/* Calc max signal level (dBm) among 3 possible receivers */
static inline int iwl_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp)
if (iwl_is_associated(priv) &&
!test_bit(STATUS_SCANNING, &priv->status)) {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
- rx_status.noise);
} else {
rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
}
/* Reset beacon noise level if not associated. */
iwl_dbg_report_frame(priv, phy_res, len, header, 1);
#endif
iwl_dbg_log_rx_data_frame(priv, len, header);
- IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+ rx_status.signal, rx_status.noise,
(unsigned long long)rx_status.mactime);
/*
return (int)ratio2dB[sig_ratio];
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/**
* iwl3945_rx_handle - Main entry function for receiving responses from uCode
*
stats.band = IEEE80211_BAND_2GHZ;
stats.signal = prxpd->snr;
stats.noise = prxpd->nf;
- stats.qual = prxpd->snr - prxpd->nf;
/* Marvell rate index has a hole at value 4 */
if (prxpd->rx_rate > 4)
--prxpd->rx_rate;
rx_status.antenna = (flags2 >> 15) & 1;
/* TODO: improve signal/rssi reporting */
- rx_status.qual = flags2 & 0xFF;
rx_status.signal = (flags2 >> 8) & 0x7F;
/* XXX: is this correct? */
rx_status.rate_idx = (flags >> 20) & 0xF;
return r;
}
-static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size)
-{
- static const u16 constants[] = {
- 715, 655, 585, 540, 470, 410, 360, 315,
- 270, 235, 205, 175, 150, 125, 105, 85,
- 65, 50, 40, 25, 15
- };
-
- int i;
- u32 x;
-
- /* It seems that their quality parameter is somehow per signal
- * and is now transferred per bit.
- */
- switch (zd_rate) {
- case ZD_OFDM_RATE_6M:
- case ZD_OFDM_RATE_12M:
- case ZD_OFDM_RATE_24M:
- size *= 2;
- break;
- case ZD_OFDM_RATE_9M:
- case ZD_OFDM_RATE_18M:
- case ZD_OFDM_RATE_36M:
- case ZD_OFDM_RATE_54M:
- size *= 4;
- size /= 3;
- break;
- case ZD_OFDM_RATE_48M:
- size *= 3;
- size /= 2;
- break;
- default:
- return -EINVAL;
- }
-
- x = (10000 * status_quality)/size;
- for (i = 0; i < ARRAY_SIZE(constants); i++) {
- if (x > constants[i])
- break;
- }
-
- switch (zd_rate) {
- case ZD_OFDM_RATE_6M:
- case ZD_OFDM_RATE_9M:
- i += 3;
- break;
- case ZD_OFDM_RATE_12M:
- case ZD_OFDM_RATE_18M:
- i += 5;
- break;
- case ZD_OFDM_RATE_24M:
- case ZD_OFDM_RATE_36M:
- i += 9;
- break;
- case ZD_OFDM_RATE_48M:
- case ZD_OFDM_RATE_54M:
- i += 15;
- break;
- default:
- return -EINVAL;
- }
-
- return i;
-}
-
-static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size)
-{
- int r;
-
- r = ofdm_qual_db(status_quality, zd_rate, size);
- ZD_ASSERT(r >= 0);
- if (r < 0)
- r = 0;
-
- r = (r * 100)/29;
- return r <= 100 ? r : 100;
-}
-
-static unsigned int log10times100(unsigned int x)
-{
- static const u8 log10[] = {
- 0,
- 0, 30, 47, 60, 69, 77, 84, 90, 95, 100,
- 104, 107, 111, 114, 117, 120, 123, 125, 127, 130,
- 132, 134, 136, 138, 139, 141, 143, 144, 146, 147,
- 149, 150, 151, 153, 154, 155, 156, 157, 159, 160,
- 161, 162, 163, 164, 165, 166, 167, 168, 169, 169,
- 170, 171, 172, 173, 174, 174, 175, 176, 177, 177,
- 178, 179, 179, 180, 181, 181, 182, 183, 183, 184,
- 185, 185, 186, 186, 187, 188, 188, 189, 189, 190,
- 190, 191, 191, 192, 192, 193, 193, 194, 194, 195,
- 195, 196, 196, 197, 197, 198, 198, 199, 199, 200,
- 200, 200, 201, 201, 202, 202, 202, 203, 203, 204,
- 204, 204, 205, 205, 206, 206, 206, 207, 207, 207,
- 208, 208, 208, 209, 209, 210, 210, 210, 211, 211,
- 211, 212, 212, 212, 213, 213, 213, 213, 214, 214,
- 214, 215, 215, 215, 216, 216, 216, 217, 217, 217,
- 217, 218, 218, 218, 219, 219, 219, 219, 220, 220,
- 220, 220, 221, 221, 221, 222, 222, 222, 222, 223,
- 223, 223, 223, 224, 224, 224, 224,
- };
-
- return x < ARRAY_SIZE(log10) ? log10[x] : 225;
-}
-
-enum {
- MAX_CCK_EVM_DB = 45,
-};
-
-static int cck_evm_db(u8 status_quality)
-{
- return (20 * log10times100(status_quality)) / 100;
-}
-
-static int cck_snr_db(u8 status_quality)
-{
- int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality);
- ZD_ASSERT(r >= 0);
- return r;
-}
-
-static int cck_qual_percent(u8 status_quality)
-{
- int r;
-
- r = cck_snr_db(status_quality);
- r = (100*r)/17;
- return r <= 100 ? r : 100;
-}
-
static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame)
{
return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame);
}
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
- const struct rx_status *status)
-{
- return (status->frame_status&ZD_RX_OFDM) ?
- ofdm_qual_percent(status->signal_quality_ofdm,
- zd_rate_from_ofdm_plcp_header(rx_frame),
- size) :
- cck_qual_percent(status->signal_quality_cck);
-}
-
/**
* zd_rx_rate - report zd-rate
* @rx_frame - received frame
struct rx_status;
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
- const struct rx_status *status);
-
u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
struct zd_mc_hash {
stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
stats.band = IEEE80211_BAND_2GHZ;
stats.signal = status->signal_strength;
- stats.qual = zd_rx_qual_percent(buffer,
- length - sizeof(struct rx_status),
- status);
rate = zd_rx_rate(buffer, status);
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
* @noise: noise when receiving this frame, in dBm.
- * @qual: overall signal quality indication, in percent (0-100).
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT rates are use (RX_FLAG_HT)
int freq;
int signal;
int noise;
- int __deprecated qual;
int antenna;
int rate_idx;
int flag;
projects / mirror_ubuntu-disco-kernel.git / commitdiff