]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
tlv320aic32x4: delay i2c access by 1 ms after hardware reset
authorPeter Seiderer <ps.report@gmx.net>
Mon, 11 Feb 2019 21:06:30 +0000 (22:06 +0100)
committerMark Brown <broonie@kernel.org>
Tue, 12 Feb 2019 14:15:00 +0000 (14:15 +0000)
As stated in 'TLV320AIC3254 Application Reference Guide' ([1]):

  3.2 Device Startup Lockout Times
    After the TLV320AIC3254 initializes through hardware reset at power-up
    or software reset, the internal registers initialize to default values.
    This initialization takes place within 1ms after pulling the RESET
    signal high. During this initialization phase, no register-read or
    register-write operation should be performed on ADC or DAC coefficient
    buffers. Also, no block within the codec should be powered up during
    the initialization phase.

[1] http://www.ti.com/lit/an/slaa408a/slaa408a.pdf

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tlv320aic32x4.c

index e1bfba62fc08f0f81dcf995238c1e74ffdd3065b..96f1526cb258a4e718afb86712aece3608c18003 100644 (file)
@@ -970,6 +970,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
        if (gpio_is_valid(aic32x4->rstn_gpio)) {
                ndelay(10);
                gpio_set_value(aic32x4->rstn_gpio, 1);
+               mdelay(1);
        }
 
        snd_soc_component_write(component, AIC32X4_RESET, 0x01);