+++ /dev/null
-/*
- * The low performance USB storage driver (ub).
- *
- * Copyright (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
- * Copyright (C) 2004 Pete Zaitcev (zaitcev@yahoo.com)
- *
- * This work is a part of Linux kernel, is derived from it,
- * and is not licensed separately. See file COPYING for details.
- *
- * TODO (sorted by decreasing priority)
- * -- Return sense now that rq allows it (we always auto-sense anyway).
- * -- set readonly flag for CDs, set removable flag for CF readers
- * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- * -- verify the 13 conditions and do bulk resets
- * -- highmem
- * -- move top_sense and work_bcs into separate allocations (if they survive)
- * for cache purists and esoteric architectures.
- * -- Allocate structure for LUN 0 before the first ub_sync_tur, avoid NULL. ?
- * -- prune comments, they are too volumnous
- * -- Resove XXX's
- * -- CLEAR, CLR2STS, CLRRS seem to be ripe for refactoring.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb_usual.h>
-#include <linux/blkdev.h>
-#include <linux/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <scsi/scsi.h>
-
-#define DRV_NAME "ub"
-
-#define UB_MAJOR 180
-
-/*
- * The command state machine is the key model for understanding of this driver.
- *
- * The general rule is that all transitions are done towards the bottom
- * of the diagram, thus preventing any loops.
- *
- * An exception to that is how the STAT state is handled. A counter allows it
- * to be re-entered along the path marked with [C].
- *
- * +--------+
- * ! INIT !
- * +--------+
- * !
- * ub_scsi_cmd_start fails ->--------------------------------------\
- * ! !
- * V !
- * +--------+ !
- * ! CMD ! !
- * +--------+ !
- * ! +--------+ !
- * was -EPIPE -->-------------------------------->! CLEAR ! !
- * ! +--------+ !
- * ! ! !
- * was error -->------------------------------------- ! --------->\
- * ! ! !
- * /--<-- cmd->dir == NONE ? ! !
- * ! ! ! !
- * ! V ! !
- * ! +--------+ ! !
- * ! ! DATA ! ! !
- * ! +--------+ ! !
- * ! ! +---------+ ! !
- * ! was -EPIPE -->--------------->! CLR2STS ! ! !
- * ! ! +---------+ ! !
- * ! ! ! ! !
- * ! ! was error -->---- ! --------->\
- * ! was error -->--------------------- ! ------------- ! --------->\
- * ! ! ! ! !
- * ! V ! ! !
- * \--->+--------+ ! ! !
- * ! STAT !<--------------------------/ ! !
- * /--->+--------+ ! !
- * ! ! ! !
- * [C] was -EPIPE -->-----------\ ! !
- * ! ! ! ! !
- * +<---- len == 0 ! ! !
- * ! ! ! ! !
- * ! was error -->--------------------------------------!---------->\
- * ! ! ! ! !
- * +<---- bad CSW ! ! !
- * +<---- bad tag ! ! !
- * ! ! V ! !
- * ! ! +--------+ ! !
- * ! ! ! CLRRS ! ! !
- * ! ! +--------+ ! !
- * ! ! ! ! !
- * \------- ! --------------------[C]--------\ ! !
- * ! ! ! !
- * cmd->error---\ +--------+ ! !
- * ! +--------------->! SENSE !<----------/ !
- * STAT_FAIL----/ +--------+ !
- * ! ! V
- * ! V +--------+
- * \--------------------------------\--------------------->! DONE !
- * +--------+
- */
-
-/*
- * This many LUNs per USB device.
- * Every one of them takes a host, see UB_MAX_HOSTS.
- */
-#define UB_MAX_LUNS 9
-
-/*
- */
-
-#define UB_PARTS_PER_LUN 8
-
-#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
-
-#define UB_SENSE_SIZE 18
-
-/*
- */
-struct ub_dev;
-
-#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
-#define UB_MAX_SECTORS 64
-
-/*
- * A second is more than enough for a 32K transfer (UB_MAX_SECTORS)
- * even if a webcam hogs the bus, but some devices need time to spin up.
- */
-#define UB_URB_TIMEOUT (HZ*2)
-#define UB_DATA_TIMEOUT (HZ*5) /* ZIP does spin-ups in the data phase */
-#define UB_STAT_TIMEOUT (HZ*5) /* Same spinups and eject for a dataless cmd. */
-#define UB_CTRL_TIMEOUT (HZ/2) /* 500ms ought to be enough to clear a stall */
-
-/*
- * An instance of a SCSI command in transit.
- */
-#define UB_DIR_NONE 0
-#define UB_DIR_READ 1
-#define UB_DIR_ILLEGAL2 2
-#define UB_DIR_WRITE 3
-
-#define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
- (((c)==UB_DIR_READ)? 'r': 'n'))
-
-enum ub_scsi_cmd_state {
- UB_CMDST_INIT, /* Initial state */
- UB_CMDST_CMD, /* Command submitted */
- UB_CMDST_DATA, /* Data phase */
- UB_CMDST_CLR2STS, /* Clearing before requesting status */
- UB_CMDST_STAT, /* Status phase */
- UB_CMDST_CLEAR, /* Clearing a stall (halt, actually) */
- UB_CMDST_CLRRS, /* Clearing before retrying status */
- UB_CMDST_SENSE, /* Sending Request Sense */
- UB_CMDST_DONE /* Final state */
-};
-
-struct ub_scsi_cmd {
- unsigned char cdb[UB_MAX_CDB_SIZE];
- unsigned char cdb_len;
-
- unsigned char dir; /* 0 - none, 1 - read, 3 - write. */
- enum ub_scsi_cmd_state state;
- unsigned int tag;
- struct ub_scsi_cmd *next;
-
- int error; /* Return code - valid upon done */
- unsigned int act_len; /* Return size */
- unsigned char key, asc, ascq; /* May be valid if error==-EIO */
-
- int stat_count; /* Retries getting status. */
- unsigned int timeo; /* jiffies until rq->timeout changes */
-
- unsigned int len; /* Requested length */
- unsigned int current_sg;
- unsigned int nsg; /* sgv[nsg] */
- struct scatterlist sgv[UB_MAX_REQ_SG];
-
- struct ub_lun *lun;
- void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
- void *back;
-};
-
-struct ub_request {
- struct request *rq;
- unsigned int current_try;
- unsigned int nsg; /* sgv[nsg] */
- struct scatterlist sgv[UB_MAX_REQ_SG];
-};
-
-/*
- */
-struct ub_capacity {
- unsigned long nsec; /* Linux size - 512 byte sectors */
- unsigned int bsize; /* Linux hardsect_size */
- unsigned int bshift; /* Shift between 512 and hard sects */
-};
-
-/*
- * This is a direct take-off from linux/include/completion.h
- * The difference is that I do not wait on this thing, just poll.
- * When I want to wait (ub_probe), I just use the stock completion.
- *
- * Note that INIT_COMPLETION takes no lock. It is correct. But why
- * in the bloody hell that thing takes struct instead of pointer to struct
- * is quite beyond me. I just copied it from the stock completion.
- */
-struct ub_completion {
- unsigned int done;
- spinlock_t lock;
-};
-
-static DEFINE_MUTEX(ub_mutex);
-static inline void ub_init_completion(struct ub_completion *x)
-{
- x->done = 0;
- spin_lock_init(&x->lock);
-}
-
-#define UB_INIT_COMPLETION(x) ((x).done = 0)
-
-static void ub_complete(struct ub_completion *x)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&x->lock, flags);
- x->done++;
- spin_unlock_irqrestore(&x->lock, flags);
-}
-
-static int ub_is_completed(struct ub_completion *x)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&x->lock, flags);
- ret = x->done;
- spin_unlock_irqrestore(&x->lock, flags);
- return ret;
-}
-
-/*
- */
-struct ub_scsi_cmd_queue {
- int qlen, qmax;
- struct ub_scsi_cmd *head, *tail;
-};
-
-/*
- * The block device instance (one per LUN).
- */
-struct ub_lun {
- struct ub_dev *udev;
- struct list_head link;
- struct gendisk *disk;
- int id; /* Host index */
- int num; /* LUN number */
- char name[16];
-
- int changed; /* Media was changed */
- int removable;
- int readonly;
-
- struct ub_request urq;
-
- /* Use Ingo's mempool if or when we have more than one command. */
- /*
- * Currently we never need more than one command for the whole device.
- * However, giving every LUN a command is a cheap and automatic way
- * to enforce fairness between them.
- */
- int cmda[1];
- struct ub_scsi_cmd cmdv[1];
-
- struct ub_capacity capacity;
-};
-
-/*
- * The USB device instance.
- */
-struct ub_dev {
- spinlock_t *lock;
- atomic_t poison; /* The USB device is disconnected */
- int openc; /* protected by ub_lock! */
- /* kref is too implicit for our taste */
- int reset; /* Reset is running */
- int bad_resid;
- unsigned int tagcnt;
- char name[12];
- struct usb_device *dev;
- struct usb_interface *intf;
-
- struct list_head luns;
-
- unsigned int send_bulk_pipe; /* cached pipe values */
- unsigned int recv_bulk_pipe;
- unsigned int send_ctrl_pipe;
- unsigned int recv_ctrl_pipe;
-
- struct tasklet_struct tasklet;
-
- struct ub_scsi_cmd_queue cmd_queue;
- struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */
- unsigned char top_sense[UB_SENSE_SIZE];
-
- struct ub_completion work_done;
- struct urb work_urb;
- struct timer_list work_timer;
- int last_pipe; /* What might need clearing */
- __le32 signature; /* Learned signature */
- struct bulk_cb_wrap work_bcb;
- struct bulk_cs_wrap work_bcs;
- struct usb_ctrlrequest work_cr;
-
- struct work_struct reset_work;
- wait_queue_head_t reset_wait;
-};
-
-/*
- */
-static void ub_cleanup(struct ub_dev *sc);
-static int ub_request_fn_1(struct ub_lun *lun, struct request *rq);
-static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_scsi_cmd *cmd, struct ub_request *urq);
-static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_scsi_cmd *cmd, struct ub_request *urq);
-static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status);
-static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_request *urq, struct ub_scsi_cmd *cmd);
-static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_urb_complete(struct urb *urb);
-static void ub_scsi_action(unsigned long _dev);
-static void ub_scsi_dispatch(struct ub_dev *sc);
-static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc);
-static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- int stalled_pipe);
-static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static void ub_reset_enter(struct ub_dev *sc, int try);
-static void ub_reset_task(struct work_struct *work);
-static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_capacity *ret);
-static int ub_sync_reset(struct ub_dev *sc);
-static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
-static int ub_probe_lun(struct ub_dev *sc, int lnum);
-
-/*
- */
-#ifdef CONFIG_USB_LIBUSUAL
-
-#define ub_usb_ids usb_storage_usb_ids
-#else
-
-static const struct usb_device_id ub_usb_ids[] = {
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, ub_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/*
- * Find me a way to identify "next free minor" for add_disk(),
- * and the array disappears the next day. However, the number of
- * hosts has something to do with the naming and /proc/partitions.
- * This has to be thought out in detail before changing.
- * If UB_MAX_HOST was 1000, we'd use a bitmap. Or a better data structure.
- */
-#define UB_MAX_HOSTS 26
-static char ub_hostv[UB_MAX_HOSTS];
-
-#define UB_QLOCK_NUM 5
-static spinlock_t ub_qlockv[UB_QLOCK_NUM];
-static int ub_qlock_next = 0;
-
-static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
-
-/*
- * The id allocator.
- *
- * This also stores the host for indexing by minor, which is somewhat dirty.
- */
-static int ub_id_get(void)
-{
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&ub_lock, flags);
- for (i = 0; i < UB_MAX_HOSTS; i++) {
- if (ub_hostv[i] == 0) {
- ub_hostv[i] = 1;
- spin_unlock_irqrestore(&ub_lock, flags);
- return i;
- }
- }
- spin_unlock_irqrestore(&ub_lock, flags);
- return -1;
-}
-
-static void ub_id_put(int id)
-{
- unsigned long flags;
-
- if (id < 0 || id >= UB_MAX_HOSTS) {
- printk(KERN_ERR DRV_NAME ": bad host ID %d\n", id);
- return;
- }
-
- spin_lock_irqsave(&ub_lock, flags);
- if (ub_hostv[id] == 0) {
- spin_unlock_irqrestore(&ub_lock, flags);
- printk(KERN_ERR DRV_NAME ": freeing free host ID %d\n", id);
- return;
- }
- ub_hostv[id] = 0;
- spin_unlock_irqrestore(&ub_lock, flags);
-}
-
-/*
- * This is necessitated by the fact that blk_cleanup_queue does not
- * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
- * Since our blk_init_queue() passes a spinlock common with ub_dev,
- * we have life time issues when ub_cleanup frees ub_dev.
- */
-static spinlock_t *ub_next_lock(void)
-{
- unsigned long flags;
- spinlock_t *ret;
-
- spin_lock_irqsave(&ub_lock, flags);
- ret = &ub_qlockv[ub_qlock_next];
- ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
- spin_unlock_irqrestore(&ub_lock, flags);
- return ret;
-}
-
-/*
- * Downcount for deallocation. This rides on two assumptions:
- * - once something is poisoned, its refcount cannot grow
- * - opens cannot happen at this time (del_gendisk was done)
- * If the above is true, we can drop the lock, which we need for
- * blk_cleanup_queue(): the silly thing may attempt to sleep.
- * [Actually, it never needs to sleep for us, but it calls might_sleep()]
- */
-static void ub_put(struct ub_dev *sc)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ub_lock, flags);
- --sc->openc;
- if (sc->openc == 0 && atomic_read(&sc->poison)) {
- spin_unlock_irqrestore(&ub_lock, flags);
- ub_cleanup(sc);
- } else {
- spin_unlock_irqrestore(&ub_lock, flags);
- }
-}
-
-/*
- * Final cleanup and deallocation.
- */
-static void ub_cleanup(struct ub_dev *sc)
-{
- struct list_head *p;
- struct ub_lun *lun;
- struct request_queue *q;
-
- while (!list_empty(&sc->luns)) {
- p = sc->luns.next;
- lun = list_entry(p, struct ub_lun, link);
- list_del(p);
-
- /* I don't think queue can be NULL. But... Stolen from sx8.c */
- if ((q = lun->disk->queue) != NULL)
- blk_cleanup_queue(q);
- /*
- * If we zero disk->private_data BEFORE put_disk, we have
- * to check for NULL all over the place in open, release,
- * check_media and revalidate, because the block level
- * semaphore is well inside the put_disk.
- * But we cannot zero after the call, because *disk is gone.
- * The sd.c is blatantly racy in this area.
- */
- /* disk->private_data = NULL; */
- put_disk(lun->disk);
- lun->disk = NULL;
-
- ub_id_put(lun->id);
- kfree(lun);
- }
-
- usb_set_intfdata(sc->intf, NULL);
- usb_put_intf(sc->intf);
- usb_put_dev(sc->dev);
- kfree(sc);
-}
-
-/*
- * The "command allocator".
- */
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
-{
- struct ub_scsi_cmd *ret;
-
- if (lun->cmda[0])
- return NULL;
- ret = &lun->cmdv[0];
- lun->cmda[0] = 1;
- return ret;
-}
-
-static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
-{
- if (cmd != &lun->cmdv[0]) {
- printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
- lun->name, cmd);
- return;
- }
- if (!lun->cmda[0]) {
- printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
- return;
- }
- lun->cmda[0] = 0;
-}
-
-/*
- * The command queue.
- */
-static void ub_cmdq_add(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
-
- if (t->qlen++ == 0) {
- t->head = cmd;
- t->tail = cmd;
- } else {
- t->tail->next = cmd;
- t->tail = cmd;
- }
-
- if (t->qlen > t->qmax)
- t->qmax = t->qlen;
-}
-
-static void ub_cmdq_insert(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
-
- if (t->qlen++ == 0) {
- t->head = cmd;
- t->tail = cmd;
- } else {
- cmd->next = t->head;
- t->head = cmd;
- }
-
- if (t->qlen > t->qmax)
- t->qmax = t->qlen;
-}
-
-static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
-{
- struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
- struct ub_scsi_cmd *cmd;
-
- if (t->qlen == 0)
- return NULL;
- if (--t->qlen == 0)
- t->tail = NULL;
- cmd = t->head;
- t->head = cmd->next;
- cmd->next = NULL;
- return cmd;
-}
-
-#define ub_cmdq_peek(sc) ((sc)->cmd_queue.head)
-
-/*
- * The request function is our main entry point
- */
-
-static void ub_request_fn(struct request_queue *q)
-{
- struct ub_lun *lun = q->queuedata;
- struct request *rq;
-
- while ((rq = blk_peek_request(q)) != NULL) {
- if (ub_request_fn_1(lun, rq) != 0) {
- blk_stop_queue(q);
- break;
- }
- }
-}
-
-static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
-{
- struct ub_dev *sc = lun->udev;
- struct ub_scsi_cmd *cmd;
- struct ub_request *urq;
- int n_elem;
-
- if (atomic_read(&sc->poison)) {
- blk_start_request(rq);
- ub_end_rq(rq, DID_NO_CONNECT << 16);
- return 0;
- }
-
- if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC) {
- blk_start_request(rq);
- ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
- return 0;
- }
-
- if (lun->urq.rq != NULL)
- return -1;
- if ((cmd = ub_get_cmd(lun)) == NULL)
- return -1;
- memset(cmd, 0, sizeof(struct ub_scsi_cmd));
-
- blk_start_request(rq);
-
- urq = &lun->urq;
- memset(urq, 0, sizeof(struct ub_request));
- urq->rq = rq;
-
- /*
- * get scatterlist from block layer
- */
- sg_init_table(&urq->sgv[0], UB_MAX_REQ_SG);
- n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]);
- if (n_elem < 0) {
- /* Impossible, because blk_rq_map_sg should not hit ENOMEM. */
- printk(KERN_INFO "%s: failed request map (%d)\n",
- lun->name, n_elem);
- goto drop;
- }
- if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */
- printk(KERN_WARNING "%s: request with %d segments\n",
- lun->name, n_elem);
- goto drop;
- }
- urq->nsg = n_elem;
-
- if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
- ub_cmd_build_packet(sc, lun, cmd, urq);
- } else {
- ub_cmd_build_block(sc, lun, cmd, urq);
- }
- cmd->state = UB_CMDST_INIT;
- cmd->lun = lun;
- cmd->done = ub_rw_cmd_done;
- cmd->back = urq;
-
- cmd->tag = sc->tagcnt++;
- if (ub_submit_scsi(sc, cmd) != 0)
- goto drop;
-
- return 0;
-
-drop:
- ub_put_cmd(lun, cmd);
- ub_end_rq(rq, DID_ERROR << 16);
- return 0;
-}
-
-static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_scsi_cmd *cmd, struct ub_request *urq)
-{
- struct request *rq = urq->rq;
- unsigned int block, nblks;
-
- if (rq_data_dir(rq) == WRITE)
- cmd->dir = UB_DIR_WRITE;
- else
- cmd->dir = UB_DIR_READ;
-
- cmd->nsg = urq->nsg;
- memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
-
- /*
- * build the command
- *
- * The call to blk_queue_logical_block_size() guarantees that request
- * is aligned, but it is given in terms of 512 byte units, always.
- */
- block = blk_rq_pos(rq) >> lun->capacity.bshift;
- nblks = blk_rq_sectors(rq) >> lun->capacity.bshift;
-
- cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
- /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
- cmd->cdb[2] = block >> 24;
- cmd->cdb[3] = block >> 16;
- cmd->cdb[4] = block >> 8;
- cmd->cdb[5] = block;
- cmd->cdb[7] = nblks >> 8;
- cmd->cdb[8] = nblks;
- cmd->cdb_len = 10;
-
- cmd->len = blk_rq_bytes(rq);
-}
-
-static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_scsi_cmd *cmd, struct ub_request *urq)
-{
- struct request *rq = urq->rq;
-
- if (blk_rq_bytes(rq) == 0) {
- cmd->dir = UB_DIR_NONE;
- } else {
- if (rq_data_dir(rq) == WRITE)
- cmd->dir = UB_DIR_WRITE;
- else
- cmd->dir = UB_DIR_READ;
- }
-
- cmd->nsg = urq->nsg;
- memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
-
- memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
- cmd->cdb_len = rq->cmd_len;
-
- cmd->len = blk_rq_bytes(rq);
-
- /*
- * To reapply this to every URB is not as incorrect as it looks.
- * In return, we avoid any complicated tracking calculations.
- */
- cmd->timeo = rq->timeout;
-}
-
-static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct ub_lun *lun = cmd->lun;
- struct ub_request *urq = cmd->back;
- struct request *rq;
- unsigned int scsi_status;
-
- rq = urq->rq;
-
- if (cmd->error == 0) {
- if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
- if (cmd->act_len >= rq->resid_len)
- rq->resid_len = 0;
- else
- rq->resid_len -= cmd->act_len;
- scsi_status = 0;
- } else {
- if (cmd->act_len != cmd->len) {
- scsi_status = SAM_STAT_CHECK_CONDITION;
- } else {
- scsi_status = 0;
- }
- }
- } else {
- if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
- /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
- memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
- rq->sense_len = UB_SENSE_SIZE;
- if (sc->top_sense[0] != 0)
- scsi_status = SAM_STAT_CHECK_CONDITION;
- else
- scsi_status = DID_ERROR << 16;
- } else {
- if (cmd->error == -EIO &&
- (cmd->key == 0 ||
- cmd->key == MEDIUM_ERROR ||
- cmd->key == UNIT_ATTENTION)) {
- if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
- return;
- }
- scsi_status = SAM_STAT_CHECK_CONDITION;
- }
- }
-
- urq->rq = NULL;
-
- ub_put_cmd(lun, cmd);
- ub_end_rq(rq, scsi_status);
- blk_start_queue(lun->disk->queue);
-}
-
-static void ub_end_rq(struct request *rq, unsigned int scsi_status)
-{
- int error;
-
- if (scsi_status == 0) {
- error = 0;
- } else {
- error = -EIO;
- rq->errors = scsi_status;
- }
- __blk_end_request_all(rq, error);
-}
-
-static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_request *urq, struct ub_scsi_cmd *cmd)
-{
-
- if (atomic_read(&sc->poison))
- return -ENXIO;
-
- ub_reset_enter(sc, urq->current_try);
-
- if (urq->current_try >= 3)
- return -EIO;
- urq->current_try++;
-
- /* Remove this if anyone complains of flooding. */
- printk(KERN_DEBUG "%s: dir %c len/act %d/%d "
- "[sense %x %02x %02x] retry %d\n",
- sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len,
- cmd->key, cmd->asc, cmd->ascq, urq->current_try);
-
- memset(cmd, 0, sizeof(struct ub_scsi_cmd));
- ub_cmd_build_block(sc, lun, cmd, urq);
-
- cmd->state = UB_CMDST_INIT;
- cmd->lun = lun;
- cmd->done = ub_rw_cmd_done;
- cmd->back = urq;
-
- cmd->tag = sc->tagcnt++;
-
-#if 0 /* Wasteful */
- return ub_submit_scsi(sc, cmd);
-#else
- ub_cmdq_add(sc, cmd);
- return 0;
-#endif
-}
-
-/*
- * Submit a regular SCSI operation (not an auto-sense).
- *
- * The Iron Law of Good Submit Routine is:
- * Zero return - callback is done, Nonzero return - callback is not done.
- * No exceptions.
- *
- * Host is assumed locked.
- */
-static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-
- if (cmd->state != UB_CMDST_INIT ||
- (cmd->dir != UB_DIR_NONE && cmd->len == 0)) {
- return -EINVAL;
- }
-
- ub_cmdq_add(sc, cmd);
- /*
- * We can call ub_scsi_dispatch(sc) right away here, but it's a little
- * safer to jump to a tasklet, in case upper layers do something silly.
- */
- tasklet_schedule(&sc->tasklet);
- return 0;
-}
-
-/*
- * Submit the first URB for the queued command.
- * This function does not deal with queueing in any way.
- */
-static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct bulk_cb_wrap *bcb;
- int rc;
-
- bcb = &sc->work_bcb;
-
- /*
- * ``If the allocation length is eighteen or greater, and a device
- * server returns less than eithteen bytes of data, the application
- * client should assume that the bytes not transferred would have been
- * zeroes had the device server returned those bytes.''
- *
- * We zero sense for all commands so that when a packet request
- * fails it does not return a stale sense.
- */
- memset(&sc->top_sense, 0, UB_SENSE_SIZE);
-
- /* set up the command wrapper */
- bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcb->Tag = cmd->tag; /* Endianness is not important */
- bcb->DataTransferLength = cpu_to_le32(cmd->len);
- bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
- bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
- bcb->Length = cmd->cdb_len;
-
- /* copy the command payload */
- memcpy(bcb->CDB, cmd->cdb, UB_MAX_CDB_SIZE);
-
- UB_INIT_COMPLETION(sc->work_done);
-
- sc->last_pipe = sc->send_bulk_pipe;
- usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
- bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
- /* XXX Clear stalls */
- ub_complete(&sc->work_done);
- return rc;
- }
-
- sc->work_timer.expires = jiffies + UB_URB_TIMEOUT;
- add_timer(&sc->work_timer);
-
- cmd->state = UB_CMDST_CMD;
- return 0;
-}
-
-/*
- * Timeout handler.
- */
-static void ub_urb_timeout(unsigned long arg)
-{
- struct ub_dev *sc = (struct ub_dev *) arg;
- unsigned long flags;
-
- spin_lock_irqsave(sc->lock, flags);
- if (!ub_is_completed(&sc->work_done))
- usb_unlink_urb(&sc->work_urb);
- spin_unlock_irqrestore(sc->lock, flags);
-}
-
-/*
- * Completion routine for the work URB.
- *
- * This can be called directly from usb_submit_urb (while we have
- * the sc->lock taken) and from an interrupt (while we do NOT have
- * the sc->lock taken). Therefore, bounce this off to a tasklet.
- */
-static void ub_urb_complete(struct urb *urb)
-{
- struct ub_dev *sc = urb->context;
-
- ub_complete(&sc->work_done);
- tasklet_schedule(&sc->tasklet);
-}
-
-static void ub_scsi_action(unsigned long _dev)
-{
- struct ub_dev *sc = (struct ub_dev *) _dev;
- unsigned long flags;
-
- spin_lock_irqsave(sc->lock, flags);
- ub_scsi_dispatch(sc);
- spin_unlock_irqrestore(sc->lock, flags);
-}
-
-static void ub_scsi_dispatch(struct ub_dev *sc)
-{
- struct ub_scsi_cmd *cmd;
- int rc;
-
- while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) {
- if (cmd->state == UB_CMDST_DONE) {
- ub_cmdq_pop(sc);
- (*cmd->done)(sc, cmd);
- } else if (cmd->state == UB_CMDST_INIT) {
- if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0)
- break;
- cmd->error = rc;
- cmd->state = UB_CMDST_DONE;
- } else {
- if (!ub_is_completed(&sc->work_done))
- break;
- del_timer(&sc->work_timer);
- ub_scsi_urb_compl(sc, cmd);
- }
- }
-}
-
-static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct urb *urb = &sc->work_urb;
- struct bulk_cs_wrap *bcs;
- int endp;
- int len;
- int rc;
-
- if (atomic_read(&sc->poison)) {
- ub_state_done(sc, cmd, -ENODEV);
- return;
- }
-
- endp = usb_pipeendpoint(sc->last_pipe);
- if (usb_pipein(sc->last_pipe))
- endp |= USB_DIR_IN;
-
- if (cmd->state == UB_CMDST_CLEAR) {
- if (urb->status == -EPIPE) {
- /*
- * STALL while clearning STALL.
- * The control pipe clears itself - nothing to do.
- */
- printk(KERN_NOTICE "%s: stall on control pipe\n",
- sc->name);
- goto Bad_End;
- }
-
- /*
- * We ignore the result for the halt clear.
- */
-
- usb_reset_endpoint(sc->dev, endp);
-
- ub_state_sense(sc, cmd);
-
- } else if (cmd->state == UB_CMDST_CLR2STS) {
- if (urb->status == -EPIPE) {
- printk(KERN_NOTICE "%s: stall on control pipe\n",
- sc->name);
- goto Bad_End;
- }
-
- /*
- * We ignore the result for the halt clear.
- */
-
- usb_reset_endpoint(sc->dev, endp);
-
- ub_state_stat(sc, cmd);
-
- } else if (cmd->state == UB_CMDST_CLRRS) {
- if (urb->status == -EPIPE) {
- printk(KERN_NOTICE "%s: stall on control pipe\n",
- sc->name);
- goto Bad_End;
- }
-
- /*
- * We ignore the result for the halt clear.
- */
-
- usb_reset_endpoint(sc->dev, endp);
-
- ub_state_stat_counted(sc, cmd);
-
- } else if (cmd->state == UB_CMDST_CMD) {
- switch (urb->status) {
- case 0:
- break;
- case -EOVERFLOW:
- goto Bad_End;
- case -EPIPE:
- rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
- if (rc != 0) {
- printk(KERN_NOTICE "%s: "
- "unable to submit clear (%d)\n",
- sc->name, rc);
- /*
- * This is typically ENOMEM or some other such shit.
- * Retrying is pointless. Just do Bad End on it...
- */
- ub_state_done(sc, cmd, rc);
- return;
- }
- cmd->state = UB_CMDST_CLEAR;
- return;
- case -ESHUTDOWN: /* unplug */
- case -EILSEQ: /* unplug timeout on uhci */
- ub_state_done(sc, cmd, -ENODEV);
- return;
- default:
- goto Bad_End;
- }
- if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
- goto Bad_End;
- }
-
- if (cmd->dir == UB_DIR_NONE || cmd->nsg < 1) {
- ub_state_stat(sc, cmd);
- return;
- }
-
- // udelay(125); // usb-storage has this
- ub_data_start(sc, cmd);
-
- } else if (cmd->state == UB_CMDST_DATA) {
- if (urb->status == -EPIPE) {
- rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
- if (rc != 0) {
- printk(KERN_NOTICE "%s: "
- "unable to submit clear (%d)\n",
- sc->name, rc);
- ub_state_done(sc, cmd, rc);
- return;
- }
- cmd->state = UB_CMDST_CLR2STS;
- return;
- }
- if (urb->status == -EOVERFLOW) {
- /*
- * A babble? Failure, but we must transfer CSW now.
- */
- cmd->error = -EOVERFLOW; /* A cheap trick... */
- ub_state_stat(sc, cmd);
- return;
- }
-
- if (cmd->dir == UB_DIR_WRITE) {
- /*
- * Do not continue writes in case of a failure.
- * Doing so would cause sectors to be mixed up,
- * which is worse than sectors lost.
- *
- * We must try to read the CSW, or many devices
- * get confused.
- */
- len = urb->actual_length;
- if (urb->status != 0 ||
- len != cmd->sgv[cmd->current_sg].length) {
- cmd->act_len += len;
-
- cmd->error = -EIO;
- ub_state_stat(sc, cmd);
- return;
- }
-
- } else {
- /*
- * If an error occurs on read, we record it, and
- * continue to fetch data in order to avoid bubble.
- *
- * As a small shortcut, we stop if we detect that
- * a CSW mixed into data.
- */
- if (urb->status != 0)
- cmd->error = -EIO;
-
- len = urb->actual_length;
- if (urb->status != 0 ||
- len != cmd->sgv[cmd->current_sg].length) {
- if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN)
- goto Bad_End;
- }
- }
-
- cmd->act_len += urb->actual_length;
-
- if (++cmd->current_sg < cmd->nsg) {
- ub_data_start(sc, cmd);
- return;
- }
- ub_state_stat(sc, cmd);
-
- } else if (cmd->state == UB_CMDST_STAT) {
- if (urb->status == -EPIPE) {
- rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
- if (rc != 0) {
- printk(KERN_NOTICE "%s: "
- "unable to submit clear (%d)\n",
- sc->name, rc);
- ub_state_done(sc, cmd, rc);
- return;
- }
-
- /*
- * Having a stall when getting CSW is an error, so
- * make sure uppper levels are not oblivious to it.
- */
- cmd->error = -EIO; /* A cheap trick... */
-
- cmd->state = UB_CMDST_CLRRS;
- return;
- }
-
- /* Catch everything, including -EOVERFLOW and other nasties. */
- if (urb->status != 0)
- goto Bad_End;
-
- if (urb->actual_length == 0) {
- ub_state_stat_counted(sc, cmd);
- return;
- }
-
- /*
- * Check the returned Bulk protocol status.
- * The status block has to be validated first.
- */
-
- bcs = &sc->work_bcs;
-
- if (sc->signature == cpu_to_le32(0)) {
- /*
- * This is the first reply, so do not perform the check.
- * Instead, remember the signature the device uses
- * for future checks. But do not allow a nul.
- */
- sc->signature = bcs->Signature;
- if (sc->signature == cpu_to_le32(0)) {
- ub_state_stat_counted(sc, cmd);
- return;
- }
- } else {
- if (bcs->Signature != sc->signature) {
- ub_state_stat_counted(sc, cmd);
- return;
- }
- }
-
- if (bcs->Tag != cmd->tag) {
- /*
- * This usually happens when we disagree with the
- * device's microcode about something. For instance,
- * a few of them throw this after timeouts. They buffer
- * commands and reply at commands we timed out before.
- * Without flushing these replies we loop forever.
- */
- ub_state_stat_counted(sc, cmd);
- return;
- }
-
- if (!sc->bad_resid) {
- len = le32_to_cpu(bcs->Residue);
- if (len != cmd->len - cmd->act_len) {
- /*
- * Only start ignoring if this cmd ended well.
- */
- if (cmd->len == cmd->act_len) {
- printk(KERN_NOTICE "%s: "
- "bad residual %d of %d, ignoring\n",
- sc->name, len, cmd->len);
- sc->bad_resid = 1;
- }
- }
- }
-
- switch (bcs->Status) {
- case US_BULK_STAT_OK:
- break;
- case US_BULK_STAT_FAIL:
- ub_state_sense(sc, cmd);
- return;
- case US_BULK_STAT_PHASE:
- goto Bad_End;
- default:
- printk(KERN_INFO "%s: unknown CSW status 0x%x\n",
- sc->name, bcs->Status);
- ub_state_done(sc, cmd, -EINVAL);
- return;
- }
-
- /* Not zeroing error to preserve a babble indicator */
- if (cmd->error != 0) {
- ub_state_sense(sc, cmd);
- return;
- }
- cmd->state = UB_CMDST_DONE;
- ub_cmdq_pop(sc);
- (*cmd->done)(sc, cmd);
-
- } else if (cmd->state == UB_CMDST_SENSE) {
- ub_state_done(sc, cmd, -EIO);
-
- } else {
- printk(KERN_WARNING "%s: wrong command state %d\n",
- sc->name, cmd->state);
- ub_state_done(sc, cmd, -EINVAL);
- return;
- }
- return;
-
-Bad_End: /* Little Excel is dead */
- ub_state_done(sc, cmd, -EIO);
-}
-
-/*
- * Factorization helper for the command state machine:
- * Initiate a data segment transfer.
- */
-static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct scatterlist *sg = &cmd->sgv[cmd->current_sg];
- int pipe;
- int rc;
-
- UB_INIT_COMPLETION(sc->work_done);
-
- if (cmd->dir == UB_DIR_READ)
- pipe = sc->recv_bulk_pipe;
- else
- pipe = sc->send_bulk_pipe;
- sc->last_pipe = pipe;
- usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe, sg_virt(sg),
- sg->length, ub_urb_complete, sc);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
- /* XXX Clear stalls */
- ub_complete(&sc->work_done);
- ub_state_done(sc, cmd, rc);
- return;
- }
-
- if (cmd->timeo)
- sc->work_timer.expires = jiffies + cmd->timeo;
- else
- sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
- add_timer(&sc->work_timer);
-
- cmd->state = UB_CMDST_DATA;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Finish the command.
- */
-static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
-{
-
- cmd->error = rc;
- cmd->state = UB_CMDST_DONE;
- ub_cmdq_pop(sc);
- (*cmd->done)(sc, cmd);
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a CSW read.
- */
-static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- int rc;
-
- UB_INIT_COMPLETION(sc->work_done);
-
- sc->last_pipe = sc->recv_bulk_pipe;
- usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
- &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
- /* XXX Clear stalls */
- ub_complete(&sc->work_done);
- ub_state_done(sc, cmd, rc);
- return -1;
- }
-
- if (cmd->timeo)
- sc->work_timer.expires = jiffies + cmd->timeo;
- else
- sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
- add_timer(&sc->work_timer);
- return 0;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a CSW read and go to STAT state.
- */
-static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-
- if (__ub_state_stat(sc, cmd) != 0)
- return;
-
- cmd->stat_count = 0;
- cmd->state = UB_CMDST_STAT;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a CSW read and go to STAT state with counter (along [C] path).
- */
-static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
-
- if (++cmd->stat_count >= 4) {
- ub_state_sense(sc, cmd);
- return;
- }
-
- if (__ub_state_stat(sc, cmd) != 0)
- return;
-
- cmd->state = UB_CMDST_STAT;
-}
-
-/*
- * Factorization helper for the command state machine:
- * Submit a REQUEST SENSE and go to SENSE state.
- */
-static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct ub_scsi_cmd *scmd;
- struct scatterlist *sg;
- int rc;
-
- if (cmd->cdb[0] == REQUEST_SENSE) {
- rc = -EPIPE;
- goto error;
- }
-
- scmd = &sc->top_rqs_cmd;
- memset(scmd, 0, sizeof(struct ub_scsi_cmd));
- scmd->cdb[0] = REQUEST_SENSE;
- scmd->cdb[4] = UB_SENSE_SIZE;
- scmd->cdb_len = 6;
- scmd->dir = UB_DIR_READ;
- scmd->state = UB_CMDST_INIT;
- scmd->nsg = 1;
- sg = &scmd->sgv[0];
- sg_init_table(sg, UB_MAX_REQ_SG);
- sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE,
- (unsigned long)sc->top_sense & (PAGE_SIZE-1));
- scmd->len = UB_SENSE_SIZE;
- scmd->lun = cmd->lun;
- scmd->done = ub_top_sense_done;
- scmd->back = cmd;
-
- scmd->tag = sc->tagcnt++;
-
- cmd->state = UB_CMDST_SENSE;
-
- ub_cmdq_insert(sc, scmd);
- return;
-
-error:
- ub_state_done(sc, cmd, rc);
-}
-
-/*
- * A helper for the command's state machine:
- * Submit a stall clear.
- */
-static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- int stalled_pipe)
-{
- int endp;
- struct usb_ctrlrequest *cr;
- int rc;
-
- endp = usb_pipeendpoint(stalled_pipe);
- if (usb_pipein (stalled_pipe))
- endp |= USB_DIR_IN;
-
- cr = &sc->work_cr;
- cr->bRequestType = USB_RECIP_ENDPOINT;
- cr->bRequest = USB_REQ_CLEAR_FEATURE;
- cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
- cr->wIndex = cpu_to_le16(endp);
- cr->wLength = cpu_to_le16(0);
-
- UB_INIT_COMPLETION(sc->work_done);
-
- usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
- (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
- ub_complete(&sc->work_done);
- return rc;
- }
-
- sc->work_timer.expires = jiffies + UB_CTRL_TIMEOUT;
- add_timer(&sc->work_timer);
- return 0;
-}
-
-/*
- */
-static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
-{
- unsigned char *sense = sc->top_sense;
- struct ub_scsi_cmd *cmd;
-
- /*
- * Find the command which triggered the unit attention or a check,
- * save the sense into it, and advance its state machine.
- */
- if ((cmd = ub_cmdq_peek(sc)) == NULL) {
- printk(KERN_WARNING "%s: sense done while idle\n", sc->name);
- return;
- }
- if (cmd != scmd->back) {
- printk(KERN_WARNING "%s: "
- "sense done for wrong command 0x%x\n",
- sc->name, cmd->tag);
- return;
- }
- if (cmd->state != UB_CMDST_SENSE) {
- printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
- sc->name, cmd->state);
- return;
- }
-
- /*
- * Ignoring scmd->act_len, because the buffer was pre-zeroed.
- */
- cmd->key = sense[2] & 0x0F;
- cmd->asc = sense[12];
- cmd->ascq = sense[13];
-
- ub_scsi_urb_compl(sc, cmd);
-}
-
-/*
- * Reset management
- */
-
-static void ub_reset_enter(struct ub_dev *sc, int try)
-{
-
- if (sc->reset) {
- /* This happens often on multi-LUN devices. */
- return;
- }
- sc->reset = try + 1;
-
-#if 0 /* Not needed because the disconnect waits for us. */
- unsigned long flags;
- spin_lock_irqsave(&ub_lock, flags);
- sc->openc++;
- spin_unlock_irqrestore(&ub_lock, flags);
-#endif
-
-#if 0 /* We let them stop themselves. */
- struct ub_lun *lun;
- list_for_each_entry(lun, &sc->luns, link) {
- blk_stop_queue(lun->disk->queue);
- }
-#endif
-
- schedule_work(&sc->reset_work);
-}
-
-static void ub_reset_task(struct work_struct *work)
-{
- struct ub_dev *sc = container_of(work, struct ub_dev, reset_work);
- unsigned long flags;
- struct ub_lun *lun;
- int rc;
-
- if (!sc->reset) {
- printk(KERN_WARNING "%s: Running reset unrequested\n",
- sc->name);
- return;
- }
-
- if (atomic_read(&sc->poison)) {
- ;
- } else if ((sc->reset & 1) == 0) {
- ub_sync_reset(sc);
- msleep(700); /* usb-storage sleeps 6s (!) */
- ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
- ub_probe_clear_stall(sc, sc->send_bulk_pipe);
- } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
- ;
- } else {
- rc = usb_lock_device_for_reset(sc->dev, sc->intf);
- if (rc < 0) {
- printk(KERN_NOTICE
- "%s: usb_lock_device_for_reset failed (%d)\n",
- sc->name, rc);
- } else {
- rc = usb_reset_device(sc->dev);
- if (rc < 0) {
- printk(KERN_NOTICE "%s: "
- "usb_lock_device_for_reset failed (%d)\n",
- sc->name, rc);
- }
- usb_unlock_device(sc->dev);
- }
- }
-
- /*
- * In theory, no commands can be running while reset is active,
- * so nobody can ask for another reset, and so we do not need any
- * queues of resets or anything. We do need a spinlock though,
- * to interact with block layer.
- */
- spin_lock_irqsave(sc->lock, flags);
- sc->reset = 0;
- tasklet_schedule(&sc->tasklet);
- list_for_each_entry(lun, &sc->luns, link) {
- blk_start_queue(lun->disk->queue);
- }
- wake_up(&sc->reset_wait);
- spin_unlock_irqrestore(sc->lock, flags);
-}
-
-/*
- * XXX Reset brackets are too much hassle to implement, so just stub them
- * in order to prevent forced unbinding (which deadlocks solid when our
- * ->disconnect method waits for the reset to complete and this kills keventd).
- *
- * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
- * or else the post_reset is invoked, and restats I/O on a locked device.
- */
-static int ub_pre_reset(struct usb_interface *iface) {
- return 0;
-}
-
-static int ub_post_reset(struct usb_interface *iface) {
- return 0;
-}
-
-/*
- * This is called from a process context.
- */
-static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
-{
-
- lun->readonly = 0; /* XXX Query this from the device */
-
- lun->capacity.nsec = 0;
- lun->capacity.bsize = 512;
- lun->capacity.bshift = 0;
-
- if (ub_sync_tur(sc, lun) != 0)
- return; /* Not ready */
- lun->changed = 0;
-
- if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
- /*
- * The retry here means something is wrong, either with the
- * device, with the transport, or with our code.
- * We keep this because sd.c has retries for capacity.
- */
- if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
- lun->capacity.nsec = 0;
- lun->capacity.bsize = 512;
- lun->capacity.bshift = 0;
- }
- }
-}
-
-/*
- * The open funcion.
- * This is mostly needed to keep refcounting, but also to support
- * media checks on removable media drives.
- */
-static int ub_bd_open(struct block_device *bdev, fmode_t mode)
-{
- struct ub_lun *lun = bdev->bd_disk->private_data;
- struct ub_dev *sc = lun->udev;
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&ub_lock, flags);
- if (atomic_read(&sc->poison)) {
- spin_unlock_irqrestore(&ub_lock, flags);
- return -ENXIO;
- }
- sc->openc++;
- spin_unlock_irqrestore(&ub_lock, flags);
-
- if (lun->removable || lun->readonly)
- check_disk_change(bdev);
-
- /*
- * The sd.c considers ->media_present and ->changed not equivalent,
- * under some pretty murky conditions (a failure of READ CAPACITY).
- * We may need it one day.
- */
- if (lun->removable && lun->changed && !(mode & FMODE_NDELAY)) {
- rc = -ENOMEDIUM;
- goto err_open;
- }
-
- if (lun->readonly && (mode & FMODE_WRITE)) {
- rc = -EROFS;
- goto err_open;
- }
-
- return 0;
-
-err_open:
- ub_put(sc);
- return rc;
-}
-
-static int ub_bd_unlocked_open(struct block_device *bdev, fmode_t mode)
-{
- int ret;
-
- mutex_lock(&ub_mutex);
- ret = ub_bd_open(bdev, mode);
- mutex_unlock(&ub_mutex);
-
- return ret;
-}
-
-
-/*
- */
-static int ub_bd_release(struct gendisk *disk, fmode_t mode)
-{
- struct ub_lun *lun = disk->private_data;
- struct ub_dev *sc = lun->udev;
-
- mutex_lock(&ub_mutex);
- ub_put(sc);
- mutex_unlock(&ub_mutex);
-
- return 0;
-}
-
-/*
- * The ioctl interface.
- */
-static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- void __user *usermem = (void __user *) arg;
- int ret;
-
- mutex_lock(&ub_mutex);
- ret = scsi_cmd_blk_ioctl(bdev, mode, cmd, usermem);
- mutex_unlock(&ub_mutex);
-
- return ret;
-}
-
-/*
- * This is called by check_disk_change if we reported a media change.
- * The main onjective here is to discover the features of the media such as
- * the capacity, read-only status, etc. USB storage generally does not
- * need to be spun up, but if we needed it, this would be the place.
- *
- * This call can sleep.
- *
- * The return code is not used.
- */
-static int ub_bd_revalidate(struct gendisk *disk)
-{
- struct ub_lun *lun = disk->private_data;
-
- ub_revalidate(lun->udev, lun);
-
- /* XXX Support sector size switching like in sr.c */
- blk_queue_logical_block_size(disk->queue, lun->capacity.bsize);
- set_capacity(disk, lun->capacity.nsec);
- // set_disk_ro(sdkp->disk, lun->readonly);
-
- return 0;
-}
-
-/*
- * The check is called by the block layer to verify if the media
- * is still available. It is supposed to be harmless, lightweight and
- * non-intrusive in case the media was not changed.
- *
- * This call can sleep.
- *
- * The return code is bool!
- */
-static unsigned int ub_bd_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- struct ub_lun *lun = disk->private_data;
-
- if (!lun->removable)
- return 0;
-
- /*
- * We clean checks always after every command, so this is not
- * as dangerous as it looks. If the TEST_UNIT_READY fails here,
- * the device is actually not ready with operator or software
- * intervention required. One dangerous item might be a drive which
- * spins itself down, and come the time to write dirty pages, this
- * will fail, then block layer discards the data. Since we never
- * spin drives up, such devices simply cannot be used with ub anyway.
- */
- if (ub_sync_tur(lun->udev, lun) != 0) {
- lun->changed = 1;
- return DISK_EVENT_MEDIA_CHANGE;
- }
-
- return lun->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
-}
-
-static const struct block_device_operations ub_bd_fops = {
- .owner = THIS_MODULE,
- .open = ub_bd_unlocked_open,
- .release = ub_bd_release,
- .ioctl = ub_bd_ioctl,
- .check_events = ub_bd_check_events,
- .revalidate_disk = ub_bd_revalidate,
-};
-
-/*
- * Common ->done routine for commands executed synchronously.
- */
-static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct completion *cop = cmd->back;
- complete(cop);
-}
-
-/*
- * Test if the device has a check condition on it, synchronously.
- */
-static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
-{
- struct ub_scsi_cmd *cmd;
- enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
- unsigned long flags;
- struct completion compl;
- int rc;
-
- init_completion(&compl);
-
- rc = -ENOMEM;
- if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
- goto err_alloc;
-
- cmd->cdb[0] = TEST_UNIT_READY;
- cmd->cdb_len = 6;
- cmd->dir = UB_DIR_NONE;
- cmd->state = UB_CMDST_INIT;
- cmd->lun = lun; /* This may be NULL, but that's ok */
- cmd->done = ub_probe_done;
- cmd->back = &compl;
-
- spin_lock_irqsave(sc->lock, flags);
- cmd->tag = sc->tagcnt++;
-
- rc = ub_submit_scsi(sc, cmd);
- spin_unlock_irqrestore(sc->lock, flags);
-
- if (rc != 0)
- goto err_submit;
-
- wait_for_completion(&compl);
-
- rc = cmd->error;
-
- if (rc == -EIO && cmd->key != 0) /* Retries for benh's key */
- rc = cmd->key;
-
-err_submit:
- kfree(cmd);
-err_alloc:
- return rc;
-}
-
-/*
- * Read the SCSI capacity synchronously (for probing).
- */
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
- struct ub_capacity *ret)
-{
- struct ub_scsi_cmd *cmd;
- struct scatterlist *sg;
- char *p;
- enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) + 8 };
- unsigned long flags;
- unsigned int bsize, shift;
- unsigned long nsec;
- struct completion compl;
- int rc;
-
- init_completion(&compl);
-
- rc = -ENOMEM;
- if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
- goto err_alloc;
- p = (char *)cmd + sizeof(struct ub_scsi_cmd);
-
- cmd->cdb[0] = 0x25;
- cmd->cdb_len = 10;
- cmd->dir = UB_DIR_READ;
- cmd->state = UB_CMDST_INIT;
- cmd->nsg = 1;
- sg = &cmd->sgv[0];
- sg_init_table(sg, UB_MAX_REQ_SG);
- sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1));
- cmd->len = 8;
- cmd->lun = lun;
- cmd->done = ub_probe_done;
- cmd->back = &compl;
-
- spin_lock_irqsave(sc->lock, flags);
- cmd->tag = sc->tagcnt++;
-
- rc = ub_submit_scsi(sc, cmd);
- spin_unlock_irqrestore(sc->lock, flags);
-
- if (rc != 0)
- goto err_submit;
-
- wait_for_completion(&compl);
-
- if (cmd->error != 0) {
- rc = -EIO;
- goto err_read;
- }
- if (cmd->act_len != 8) {
- rc = -EIO;
- goto err_read;
- }
-
- /* sd.c special-cases sector size of 0 to mean 512. Needed? Safe? */
- nsec = be32_to_cpu(*(__be32 *)p) + 1;
- bsize = be32_to_cpu(*(__be32 *)(p + 4));
- switch (bsize) {
- case 512: shift = 0; break;
- case 1024: shift = 1; break;
- case 2048: shift = 2; break;
- case 4096: shift = 3; break;
- default:
- rc = -EDOM;
- goto err_inv_bsize;
- }
-
- ret->bsize = bsize;
- ret->bshift = shift;
- ret->nsec = nsec << shift;
- rc = 0;
-
-err_inv_bsize:
-err_read:
-err_submit:
- kfree(cmd);
-err_alloc:
- return rc;
-}
-
-/*
- */
-static void ub_probe_urb_complete(struct urb *urb)
-{
- struct completion *cop = urb->context;
- complete(cop);
-}
-
-static void ub_probe_timeout(unsigned long arg)
-{
- struct completion *cop = (struct completion *) arg;
- complete(cop);
-}
-
-/*
- * Reset with a Bulk reset.
- */
-static int ub_sync_reset(struct ub_dev *sc)
-{
- int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
- struct usb_ctrlrequest *cr;
- struct completion compl;
- struct timer_list timer;
- int rc;
-
- init_completion(&compl);
-
- cr = &sc->work_cr;
- cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
- cr->bRequest = US_BULK_RESET_REQUEST;
- cr->wValue = cpu_to_le16(0);
- cr->wIndex = cpu_to_le16(ifnum);
- cr->wLength = cpu_to_le16(0);
-
- usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
- (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
- printk(KERN_WARNING
- "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
- return rc;
- }
-
- init_timer(&timer);
- timer.function = ub_probe_timeout;
- timer.data = (unsigned long) &compl;
- timer.expires = jiffies + UB_CTRL_TIMEOUT;
- add_timer(&timer);
-
- wait_for_completion(&compl);
-
- del_timer_sync(&timer);
- usb_kill_urb(&sc->work_urb);
-
- return sc->work_urb.status;
-}
-
-/*
- * Get number of LUNs by the way of Bulk GetMaxLUN command.
- */
-static int ub_sync_getmaxlun(struct ub_dev *sc)
-{
- int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
- unsigned char *p;
- enum { ALLOC_SIZE = 1 };
- struct usb_ctrlrequest *cr;
- struct completion compl;
- struct timer_list timer;
- int nluns;
- int rc;
-
- init_completion(&compl);
-
- rc = -ENOMEM;
- if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
- goto err_alloc;
- *p = 55;
-
- cr = &sc->work_cr;
- cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
- cr->bRequest = US_BULK_GET_MAX_LUN;
- cr->wValue = cpu_to_le16(0);
- cr->wIndex = cpu_to_le16(ifnum);
- cr->wLength = cpu_to_le16(1);
-
- usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
- (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0)
- goto err_submit;
-
- init_timer(&timer);
- timer.function = ub_probe_timeout;
- timer.data = (unsigned long) &compl;
- timer.expires = jiffies + UB_CTRL_TIMEOUT;
- add_timer(&timer);
-
- wait_for_completion(&compl);
-
- del_timer_sync(&timer);
- usb_kill_urb(&sc->work_urb);
-
- if ((rc = sc->work_urb.status) < 0)
- goto err_io;
-
- if (sc->work_urb.actual_length != 1) {
- nluns = 0;
- } else {
- if ((nluns = *p) == 55) {
- nluns = 0;
- } else {
- /* GetMaxLUN returns the maximum LUN number */
- nluns += 1;
- if (nluns > UB_MAX_LUNS)
- nluns = UB_MAX_LUNS;
- }
- }
-
- kfree(p);
- return nluns;
-
-err_io:
-err_submit:
- kfree(p);
-err_alloc:
- return rc;
-}
-
-/*
- * Clear initial stalls.
- */
-static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
-{
- int endp;
- struct usb_ctrlrequest *cr;
- struct completion compl;
- struct timer_list timer;
- int rc;
-
- init_completion(&compl);
-
- endp = usb_pipeendpoint(stalled_pipe);
- if (usb_pipein (stalled_pipe))
- endp |= USB_DIR_IN;
-
- cr = &sc->work_cr;
- cr->bRequestType = USB_RECIP_ENDPOINT;
- cr->bRequest = USB_REQ_CLEAR_FEATURE;
- cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
- cr->wIndex = cpu_to_le16(endp);
- cr->wLength = cpu_to_le16(0);
-
- usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
- (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
- printk(KERN_WARNING
- "%s: Unable to submit a probe clear (%d)\n", sc->name, rc);
- return rc;
- }
-
- init_timer(&timer);
- timer.function = ub_probe_timeout;
- timer.data = (unsigned long) &compl;
- timer.expires = jiffies + UB_CTRL_TIMEOUT;
- add_timer(&timer);
-
- wait_for_completion(&compl);
-
- del_timer_sync(&timer);
- usb_kill_urb(&sc->work_urb);
-
- usb_reset_endpoint(sc->dev, endp);
-
- return 0;
-}
-
-/*
- * Get the pipe settings.
- */
-static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
- struct usb_interface *intf)
-{
- struct usb_host_interface *altsetting = intf->cur_altsetting;
- struct usb_endpoint_descriptor *ep_in = NULL;
- struct usb_endpoint_descriptor *ep_out = NULL;
- struct usb_endpoint_descriptor *ep;
- int i;
-
- /*
- * Find the endpoints we need.
- * We are expecting a minimum of 2 endpoints - in and out (bulk).
- * We will ignore any others.
- */
- for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
- ep = &altsetting->endpoint[i].desc;
-
- /* Is it a BULK endpoint? */
- if (usb_endpoint_xfer_bulk(ep)) {
- /* BULK in or out? */
- if (usb_endpoint_dir_in(ep)) {
- if (ep_in == NULL)
- ep_in = ep;
- } else {
- if (ep_out == NULL)
- ep_out = ep;
- }
- }
- }
-
- if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
- return -ENODEV;
- }
-
- /* Calculate and store the pipe values */
- sc->send_ctrl_pipe = usb_sndctrlpipe(dev, 0);
- sc->recv_ctrl_pipe = usb_rcvctrlpipe(dev, 0);
- sc->send_bulk_pipe = usb_sndbulkpipe(dev,
- usb_endpoint_num(ep_out));
- sc->recv_bulk_pipe = usb_rcvbulkpipe(dev,
- usb_endpoint_num(ep_in));
-
- return 0;
-}
-
-/*
- * Probing is done in the process context, which allows us to cheat
- * and not to build a state machine for the discovery.
- */
-static int ub_probe(struct usb_interface *intf,
- const struct usb_device_id *dev_id)
-{
- struct ub_dev *sc;
- int nluns;
- int rc;
- int i;
-
- if (usb_usual_check_type(dev_id, USB_US_TYPE_UB))
- return -ENXIO;
-
- rc = -ENOMEM;
- if ((sc = kzalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
- goto err_core;
- sc->lock = ub_next_lock();
- INIT_LIST_HEAD(&sc->luns);
- usb_init_urb(&sc->work_urb);
- tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
- atomic_set(&sc->poison, 0);
- INIT_WORK(&sc->reset_work, ub_reset_task);
- init_waitqueue_head(&sc->reset_wait);
-
- init_timer(&sc->work_timer);
- sc->work_timer.data = (unsigned long) sc;
- sc->work_timer.function = ub_urb_timeout;
-
- ub_init_completion(&sc->work_done);
- sc->work_done.done = 1; /* A little yuk, but oh well... */
-
- sc->dev = interface_to_usbdev(intf);
- sc->intf = intf;
- // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
- usb_set_intfdata(intf, sc);
- usb_get_dev(sc->dev);
- /*
- * Since we give the interface struct to the block level through
- * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
- * oopses on close after a disconnect (kernels 2.6.16 and up).
- */
- usb_get_intf(sc->intf);
-
- snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
- sc->dev->bus->busnum, sc->dev->devnum);
-
- /* XXX Verify that we can handle the device (from descriptors) */
-
- if (ub_get_pipes(sc, sc->dev, intf) != 0)
- goto err_dev_desc;
-
- /*
- * At this point, all USB initialization is done, do upper layer.
- * We really hate halfway initialized structures, so from the
- * invariants perspective, this ub_dev is fully constructed at
- * this point.
- */
-
- /*
- * This is needed to clear toggles. It is a problem only if we do
- * `rmmod ub && modprobe ub` without disconnects, but we like that.
- */
-#if 0 /* iPod Mini fails if we do this (big white iPod works) */
- ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
- ub_probe_clear_stall(sc, sc->send_bulk_pipe);
-#endif
-
- /*
- * The way this is used by the startup code is a little specific.
- * A SCSI check causes a USB stall. Our common case code sees it
- * and clears the check, after which the device is ready for use.
- * But if a check was not present, any command other than
- * TEST_UNIT_READY ends with a lockup (including REQUEST_SENSE).
- *
- * If we neglect to clear the SCSI check, the first real command fails
- * (which is the capacity readout). We clear that and retry, but why
- * causing spurious retries for no reason.
- *
- * Revalidation may start with its own TEST_UNIT_READY, but that one
- * has to succeed, so we clear checks with an additional one here.
- * In any case it's not our business how revaliadation is implemented.
- */
- for (i = 0; i < 3; i++) { /* Retries for the schwag key from KS'04 */
- if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
- if (rc != 0x6) break;
- msleep(10);
- }
-
- nluns = 1;
- for (i = 0; i < 3; i++) {
- if ((rc = ub_sync_getmaxlun(sc)) < 0)
- break;
- if (rc != 0) {
- nluns = rc;
- break;
- }
- msleep(100);
- }
-
- for (i = 0; i < nluns; i++) {
- ub_probe_lun(sc, i);
- }
- return 0;
-
-err_dev_desc:
- usb_set_intfdata(intf, NULL);
- usb_put_intf(sc->intf);
- usb_put_dev(sc->dev);
- kfree(sc);
-err_core:
- return rc;
-}
-
-static int ub_probe_lun(struct ub_dev *sc, int lnum)
-{
- struct ub_lun *lun;
- struct request_queue *q;
- struct gendisk *disk;
- int rc;
-
- rc = -ENOMEM;
- if ((lun = kzalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
- goto err_alloc;
- lun->num = lnum;
-
- rc = -ENOSR;
- if ((lun->id = ub_id_get()) == -1)
- goto err_id;
-
- lun->udev = sc;
-
- snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
- lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
-
- lun->removable = 1; /* XXX Query this from the device */
- lun->changed = 1; /* ub_revalidate clears only */
- ub_revalidate(sc, lun);
-
- rc = -ENOMEM;
- if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL)
- goto err_diskalloc;
-
- sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
- disk->major = UB_MAJOR;
- disk->first_minor = lun->id * UB_PARTS_PER_LUN;
- disk->fops = &ub_bd_fops;
- disk->private_data = lun;
- disk->driverfs_dev = &sc->intf->dev;
-
- rc = -ENOMEM;
- if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
- goto err_blkqinit;
-
- disk->queue = q;
-
- blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
- blk_queue_max_segments(q, UB_MAX_REQ_SG);
- blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
- blk_queue_max_hw_sectors(q, UB_MAX_SECTORS);
- blk_queue_logical_block_size(q, lun->capacity.bsize);
-
- lun->disk = disk;
- q->queuedata = lun;
- list_add(&lun->link, &sc->luns);
-
- set_capacity(disk, lun->capacity.nsec);
- if (lun->removable)
- disk->flags |= GENHD_FL_REMOVABLE;
-
- add_disk(disk);
-
- return 0;
-
-err_blkqinit:
- put_disk(disk);
-err_diskalloc:
- ub_id_put(lun->id);
-err_id:
- kfree(lun);
-err_alloc:
- return rc;
-}
-
-static void ub_disconnect(struct usb_interface *intf)
-{
- struct ub_dev *sc = usb_get_intfdata(intf);
- struct ub_lun *lun;
- unsigned long flags;
-
- /*
- * Prevent ub_bd_release from pulling the rug from under us.
- * XXX This is starting to look like a kref.
- * XXX Why not to take this ref at probe time?
- */
- spin_lock_irqsave(&ub_lock, flags);
- sc->openc++;
- spin_unlock_irqrestore(&ub_lock, flags);
-
- /*
- * Fence stall clearings, operations triggered by unlinkings and so on.
- * We do not attempt to unlink any URBs, because we do not trust the
- * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
- */
- atomic_set(&sc->poison, 1);
-
- /*
- * Wait for reset to end, if any.
- */
- wait_event(sc->reset_wait, !sc->reset);
-
- /*
- * Blow away queued commands.
- *
- * Actually, this never works, because before we get here
- * the HCD terminates outstanding URB(s). It causes our
- * SCSI command queue to advance, commands fail to submit,
- * and the whole queue drains. So, we just use this code to
- * print warnings.
- */
- spin_lock_irqsave(sc->lock, flags);
- {
- struct ub_scsi_cmd *cmd;
- int cnt = 0;
- while ((cmd = ub_cmdq_peek(sc)) != NULL) {
- cmd->error = -ENOTCONN;
- cmd->state = UB_CMDST_DONE;
- ub_cmdq_pop(sc);
- (*cmd->done)(sc, cmd);
- cnt++;
- }
- if (cnt != 0) {
- printk(KERN_WARNING "%s: "
- "%d was queued after shutdown\n", sc->name, cnt);
- }
- }
- spin_unlock_irqrestore(sc->lock, flags);
-
- /*
- * Unregister the upper layer.
- */
- list_for_each_entry(lun, &sc->luns, link) {
- del_gendisk(lun->disk);
- /*
- * I wish I could do:
- * queue_flag_set(QUEUE_FLAG_DEAD, q);
- * As it is, we rely on our internal poisoning and let
- * the upper levels to spin furiously failing all the I/O.
- */
- }
-
- /*
- * Testing for -EINPROGRESS is always a bug, so we are bending
- * the rules a little.
- */
- spin_lock_irqsave(sc->lock, flags);
- if (sc->work_urb.status == -EINPROGRESS) { /* janitors: ignore */
- printk(KERN_WARNING "%s: "
- "URB is active after disconnect\n", sc->name);
- }
- spin_unlock_irqrestore(sc->lock, flags);
-
- /*
- * There is virtually no chance that other CPU runs a timeout so long
- * after ub_urb_complete should have called del_timer, but only if HCD
- * didn't forget to deliver a callback on unlink.
- */
- del_timer_sync(&sc->work_timer);
-
- /*
- * At this point there must be no commands coming from anyone
- * and no URBs left in transit.
- */
-
- ub_put(sc);
-}
-
-static struct usb_driver ub_driver = {
- .name = "ub",
- .probe = ub_probe,
- .disconnect = ub_disconnect,
- .id_table = ub_usb_ids,
- .pre_reset = ub_pre_reset,
- .post_reset = ub_post_reset,
-};
-
-static int __init ub_init(void)
-{
- int rc;
- int i;
-
- pr_info("'Low Performance USB Block' driver is deprecated. "
- "Please switch to usb-storage\n");
- for (i = 0; i < UB_QLOCK_NUM; i++)
- spin_lock_init(&ub_qlockv[i]);
-
- if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
- goto err_regblkdev;
-
- if ((rc = usb_register(&ub_driver)) != 0)
- goto err_register;
-
- usb_usual_set_present(USB_US_TYPE_UB);
- return 0;
-
-err_register:
- unregister_blkdev(UB_MAJOR, DRV_NAME);
-err_regblkdev:
- return rc;
-}
-
-static void __exit ub_exit(void)
-{
- usb_deregister(&ub_driver);
-
- unregister_blkdev(UB_MAJOR, DRV_NAME);
- usb_usual_clear_present(USB_US_TYPE_UB);
-}
-
-module_init(ub_init);
-module_exit(ub_exit);
-
-MODULE_LICENSE("GPL");
projects / mirror_ubuntu-zesty-kernel.git / commitdiff