staging: comedi: cb_pcimdas: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Remove the unnecessary comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 3e39cb593e10806e98d15fc0f688eeb99948df53..d3141c865fe72a74725124c6b11d32857e32bf2a 100644 (file)
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -85,21 +85,31 @@ struct cb_pcimdas_private {
        unsigned int ao_readback[2];
 };
 
-/*
- * "instructions" read/write data in "one-shot" or "software-triggered"
- * mode.
- */
+static int cb_pcimdas_ai_eoc(struct comedi_device *dev,
+                            struct comedi_subdevice *s,
+                            struct comedi_insn *insn,
+                            unsigned long context)
+{
+       struct cb_pcimdas_private *devpriv = dev->private;
+       unsigned int status;
+
+       status = inb(devpriv->BADR3 + 2);
+       if ((status & 0x80) == 0)
+               return 0;
+       return -EBUSY;
+}
+
 static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
                               struct comedi_subdevice *s,
                               struct comedi_insn *insn, unsigned int *data)
 {
        struct cb_pcimdas_private *devpriv = dev->private;
-       int n, i;
+       int n;
        unsigned int d;
-       unsigned int busy;
        int chan = CR_CHAN(insn->chanspec);
        unsigned short chanlims;
        int maxchans;
+       int ret;
 
        /*  only support sw initiated reads from a single channel */
 
@@ -133,17 +143,10 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
                /* trigger conversion */
                outw(0, dev->iobase + 0);
 
-#define TIMEOUT 1000           /* typically takes 5 loops on a lightly loaded Pentium 100MHz, */
-               /* this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit. */
-
                /* wait for conversion to end */
-               for (i = 0; i < TIMEOUT; i++) {
-                       busy = inb(devpriv->BADR3 + 2) & 0x80;
-                       if (!busy)
-                               break;
-               }
-               if (i == TIMEOUT)
-                       return -ETIMEDOUT;
+               ret = comedi_timeout(dev, s, insn, cb_pcimdas_ai_eoc, 0);
+               if (ret)
+                       return ret;
 
                /* read data */
                data[n] = inw(dev->iobase + 0);