When a device is un-ignored, device recognition and sensing is performed and
the device driver will be notified if possible, so the device will become
- available to the system.
+ available to the system. Note that un-ignoring is performed asynchronously.
You can also add ranges of devices to be ignored by piping to
/proc/cio_ignore; "add <device range>, <device range>, ..." will ignore the
This routine returns the characteristics for the device specified.
-The function is meant to be called with an irq handler in place; that is,
+The function is meant to be called with the device already enabled; that is,
at earliest during set_online() processing.
-While the request is processed synchronously, the device interrupt
-handler is called for final ending status. In case of error situations the
-interrupt handler may recover appropriately. The device irq handler can
-recognize the corresponding interrupts by the interruption parameter be
-0x00524443. The ccw_device must not be locked prior to calling read_dev_chars().
+The ccw_device must not be locked prior to calling read_dev_chars().
The function may be called enabled or disabled.
Usage Notes :
-Prior to call ccw_device_start() the device driver must assure disabled state,
-i.e. the I/O mask value in the PSW must be disabled. This can be accomplished
-by calling local_save_flags( flags). The current PSW flags are preserved and
-can be restored by local_irq_restore( flags) at a later time.
-
-If the device driver violates this rule while running in a uni-processor
-environment an interrupt might be presented prior to the ccw_device_start()
-routine returning to the device driver main path. In this case we will end in a
-deadlock situation as the interrupt handler will try to obtain the irq
-lock the device driver still owns (see below) !
-
-The driver must assure to hold the device specific lock. This can be
-accomplished by
-
-(i) spin_lock(get_ccwdev_lock(cdev)), or
-(ii) spin_lock_irqsave(get_ccwdev_lock(cdev), flags)
-
-Option (i) should be used if the calling routine is running disabled for
-I/O interrupts (see above) already. Option (ii) obtains the device gate und
-puts the CPU into I/O disabled state by preserving the current PSW flags.
+ccw_device_start() must be called disabled and with the ccw device lock held.
The device driver is allowed to issue the next ccw_device_start() call from
within its interrupt handler already. It is not required to schedule a
cdev - ccw_device the resume operation is requested for
-The resume_IO() function returns:
+The ccw_device_resume() function returns:
0 - suspended channel program is resumed
-EBUSY - status pending
a halt subchannel (HSCH) I/O command. For those purposes the ccw_device_halt()
command is provided.
+ccw_device_halt() must be called disabled and with the ccw device lock held.
+
int ccw_device_halt(struct ccw_device *cdev,
unsigned long intparm);
The ccw_device_halt() function returns :
- 0 - successful completion or request successfully initiated
+ 0 - request successfully initiated
-EBUSY - the device is currently busy, or status pending.
-ENODEV - cdev invalid.
-EINVAL - The device is not operational or the ccw device is not online.
read to a network device (with or without PCI flag) a ccw_device_halt()
is required to end the pending operation.
+ccw_device_clear() - Terminage I/O Request Processing
+
+In order to terminate all I/O processing at the subchannel, the clear subchannel
+(CSCH) command is used. It can be issued via ccw_device_clear().
+
+ccw_device_clear() must be called disabled and with the ccw device lock held.
+
+int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm);
+
+cdev: ccw_device the clear operation is requested for
+intparm: interruption parameter (see ccw_device_halt())
+
+The ccw_device_clear() function returns:
+
+ 0 - request successfully initiated
+-ENODEV - cdev invalid
+-EINVAL - The device is not operational or the ccw device is not online.
Miscellaneous Support Routines
type - The physical type of the channel path.
+shared - Whether the channel path is shared.
+
+cmg - The channel measurement group.
3. System devices
-----------------
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Wed Oct 4 19:45:46 2006
+# Linux kernel version: 2.6.19-rc2
+# Wed Oct 18 17:11:10 2006
#
CONFIG_MMU=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
#
# CONFIG_NLS is not set
-#
-# Distributed Lock Manager
-#
-
#
# Instrumentation Support
#
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
+CONFIG_HEADERS_CHECK=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
*
* This is really horribly ugly.
*/
+#ifdef CONFIG_SYSVIPC
asmlinkage long sys32_ipc(u32 call, int first, int second, int third, u32 ptr)
{
if (call >> 16) /* hack for backward compatibility */
return -ENOSYS;
}
+#endif
asmlinkage long sys32_truncate64(const char __user * path, unsigned long high, unsigned long low)
{
SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper)
NI_SYSCALL /* 310 sys_move_pages */
SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper)
+SYSCALL(sys_epoll_pwait,sys_epoll_pwait,sys_ni_syscall)
rc = dasd_flush_ccw_queue(device, 1);
if (rc)
return rc;
+ dasd_clear_timer(device);
DBF_DEV_EVENT(DBF_EMERG, device, "%p debug area deleted", device);
if (device->debug_area != NULL) {
struct mon_buf *entry, *next;
list_for_each_entry_safe(entry, next, &monpriv->list, list)
- if (entry->hdr.applid == monhdr->applid &&
+ if ((entry->hdr.mon_function == monhdr->mon_function ||
+ monhdr->mon_function == MONWRITE_STOP_INTERVAL) &&
+ entry->hdr.applid == monhdr->applid &&
entry->hdr.record_num == monhdr->record_num &&
entry->hdr.version == monhdr->version &&
entry->hdr.release == monhdr->release &&
entry->hdr.mod_level == monhdr->mod_level)
return entry;
+
return NULL;
}
monhdr->mon_function > MONWRITE_START_CONFIG ||
monhdr->hdrlen != sizeof(struct monwrite_hdr))
return -EINVAL;
- monbuf = monwrite_find_hdr(monpriv, monhdr);
+ monbuf = NULL;
+ if (monhdr->mon_function != MONWRITE_GEN_EVENT)
+ monbuf = monwrite_find_hdr(monpriv, monhdr);
if (monbuf) {
if (monhdr->mon_function == MONWRITE_STOP_INTERVAL) {
monhdr->datalen = monbuf->hdr.datalen;
kfree(monbuf);
monbuf = NULL;
}
- } else {
+ } else if (monhdr->mon_function != MONWRITE_STOP_INTERVAL) {
if (mon_buf_count >= mon_max_bufs)
return -ENOSPC;
monbuf = kzalloc(sizeof(struct mon_buf), GFP_KERNEL);
}
monbuf->hdr = *monhdr;
list_add_tail(&monbuf->list, &monpriv->list);
- mon_buf_count++;
+ if (monhdr->mon_function != MONWRITE_GEN_EVENT)
+ mon_buf_count++;
}
monpriv->current_buf = monbuf;
return 0;
}
break;
case -ETIME:
+ /* Reset oper notify indication after verify error. */
+ cdev->private->flags.donotify = 0;
ccw_device_done(cdev, DEV_STATE_BOXED);
break;
default:
+ /* Reset oper notify indication after verify error. */
+ cdev->private->flags.donotify = 0;
PREPARE_WORK(&cdev->private->kick_work,
ccw_device_nopath_notify, cdev);
queue_work(ccw_device_notify_work, &cdev->private->kick_work);
#ifdef CONFIG_QDIO_DEBUG
char dbf_text[20];
- sprintf(dbf_text,"doQD%04x",cdev->private->sch_no);
+ sprintf(dbf_text,"doQD%04x",cdev->private->schid.sch_no);
QDIO_DBF_TEXT3(0,trace,dbf_text);
#endif /* CONFIG_QDIO_DEBUG */
*/
/* Hardware bits in the page table entry */
-#define _PAGE_RO 0x200 /* HW read-only */
-#define _PAGE_INVALID 0x400 /* HW invalid */
+#define _PAGE_RO 0x200 /* HW read-only bit */
+#define _PAGE_INVALID 0x400 /* HW invalid bit */
+#define _PAGE_SWT 0x001 /* SW pte type bit t */
+#define _PAGE_SWX 0x002 /* SW pte type bit x */
-/* Mask and six different types of pages. */
-#define _PAGE_TYPE_MASK 0x601
+/* Six different types of pages. */
#define _PAGE_TYPE_EMPTY 0x400
#define _PAGE_TYPE_NONE 0x401
-#define _PAGE_TYPE_SWAP 0x600
-#define _PAGE_TYPE_FILE 0x601
+#define _PAGE_TYPE_SWAP 0x403
+#define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */
#define _PAGE_TYPE_RO 0x200
#define _PAGE_TYPE_RW 0x000
+/*
+ * PTE type bits are rather complicated. handle_pte_fault uses pte_present,
+ * pte_none and pte_file to find out the pte type WITHOUT holding the page
+ * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to
+ * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs
+ * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards.
+ * This change is done while holding the lock, but the intermediate step
+ * of a previously valid pte with the hw invalid bit set can be observed by
+ * handle_pte_fault. That makes it necessary that all valid pte types with
+ * the hw invalid bit set must be distinguishable from the four pte types
+ * empty, none, swap and file.
+ *
+ * irxt ipte irxt
+ * _PAGE_TYPE_EMPTY 1000 -> 1000
+ * _PAGE_TYPE_NONE 1001 -> 1001
+ * _PAGE_TYPE_SWAP 1011 -> 1011
+ * _PAGE_TYPE_FILE 11?1 -> 11?1
+ * _PAGE_TYPE_RO 0100 -> 1100
+ * _PAGE_TYPE_RW 0000 -> 1000
+ *
+ * pte_none is true for bits combinations 1000, 1100
+ * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001
+ * pte_file is true for bits combinations 1101, 1111
+ * swap pte is 1011 and 0001, 0011, 0101, 0111, 1010 and 1110 are invalid.
+ */
+
#ifndef __s390x__
/* Bits in the segment table entry */
static inline int pte_none(pte_t pte)
{
- return (pte_val(pte) & _PAGE_TYPE_MASK) == _PAGE_TYPE_EMPTY;
+ return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT);
}
static inline int pte_present(pte_t pte)
{
- return !(pte_val(pte) & _PAGE_INVALID) ||
- (pte_val(pte) & _PAGE_TYPE_MASK) == _PAGE_TYPE_NONE;
+ unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX;
+ return (pte_val(pte) & mask) == _PAGE_TYPE_NONE ||
+ (!(pte_val(pte) & _PAGE_INVALID) &&
+ !(pte_val(pte) & _PAGE_SWT));
}
static inline int pte_file(pte_t pte)
{
- return (pte_val(pte) & _PAGE_TYPE_MASK) == _PAGE_TYPE_FILE;
+ unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT;
+ return (pte_val(pte) & mask) == _PAGE_TYPE_FILE;
}
#define pte_same(a,b) (pte_val(a) == pte_val(b))
#define __NR_vmsplice 309
/* Number 310 is reserved for new sys_move_pages */
#define __NR_getcpu 311
+#define __NR_epoll_pwait 312
-#define NR_syscalls 312
+#define NR_syscalls 313
/*
* There are some system calls that are not present on 64 bit, some
projects / mirror_ubuntu-bionic-kernel.git / commitdiff