#define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558
#define IXGBE_DEV_ID_X540T1 0x1560
+#define IXGBE_DEV_ID_X550T 0x1563
+#define IXGBE_DEV_ID_X550EM_X_KX4 0x15AA
+#define IXGBE_DEV_ID_X550EM_X_KR 0x15AB
+#define IXGBE_DEV_ID_X550EM_X_SFP 0x15AC
+#define IXGBE_DEV_ID_X550EM_X_10G_T 0x15AD
+#define IXGBE_DEV_ID_X550EM_X_1G_T 0x15AE
+#define IXGBE_DEV_ID_X550_VF_HV 0x1564
+#define IXGBE_DEV_ID_X550_VF 0x1565
+#define IXGBE_DEV_ID_X550EM_X_VF 0x15A8
+#define IXGBE_DEV_ID_X550EM_X_VF_HV 0x15A9
+
/* VF Device IDs */
#define IXGBE_DEV_ID_82599_VF 0x10ED
#define IXGBE_DEV_ID_X540_VF 0x1515
#define IXGBE_LDPCECL 0x0E820
#define IXGBE_LDPCECH 0x0E821
+/* MII clause 22/28 definitions */
+#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800
+
+#define IXGBE_MDIO_XENPAK_LASI_STATUS 0x9005 /* XENPAK LASI Status register */
+#define IXGBE_XENPAK_LASI_LINK_STATUS_ALARM 0x1 /* Link Status Alarm change */
+
+#define IXGBE_MDIO_AUTO_NEG_LINK_STATUS 0x4 /* Indicates if link is up */
+
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK 0x7 /* Speed/Duplex Mask */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF 0x0 /* 10Mb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL 0x1 /* 10Mb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF 0x2 /* 100Mb/s H Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_FULL 0x3 /* 100Mb/s F Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_HALF 0x4 /* 1Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL 0x5 /* 1Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF 0x6 /* 10Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL 0x7 /* 10Gb/s Full Duplex */
+
/* Management */
#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
/* MDIO definitions */
+#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
+#define IXGBE_MDIO_PCS_DEV_TYPE 0x3
+#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4
+#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */
+#define IXGBE_TWINAX_DEV 1
+
#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */
+#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */
+#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */
+
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3 0xCC02 /* Vendor Alarms 3 Reg */
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */
+#define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */
+#define IXGBE_MDIO_POWER_UP_STALL 0x8000 /* Power Up Stall */
+
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Stat Reg */
+#define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR 0x9 /* Standard Tx Dis Reg */
+#define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE 0x0001 /* PMD Global Tx Dis */
/* MII clause 22/28 definitions */
#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */
/* SW_FW_SYNC/GSSR definitions */
-#define IXGBE_GSSR_EEP_SM 0x0001
-#define IXGBE_GSSR_PHY0_SM 0x0002
-#define IXGBE_GSSR_PHY1_SM 0x0004
-#define IXGBE_GSSR_MAC_CSR_SM 0x0008
-#define IXGBE_GSSR_FLASH_SM 0x0010
-#define IXGBE_GSSR_SW_MNG_SM 0x0400
+#define IXGBE_GSSR_EEP_SM 0x0001
+#define IXGBE_GSSR_PHY0_SM 0x0002
+#define IXGBE_GSSR_PHY1_SM 0x0004
+#define IXGBE_GSSR_MAC_CSR_SM 0x0008
+#define IXGBE_GSSR_FLASH_SM 0x0010
+#define IXGBE_GSSR_SW_MNG_SM 0x0400
+#define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys & I2Cs */
+#define IXGBE_GSSR_I2C_MASK 0x1800
/* FW Status register bitmask */
#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */
#define IXGBE_PBANUM_LENGTH 11
/* Checksum and EEPROM pointers */
-#define IXGBE_PBANUM_PTR_GUARD 0xFAFA
-#define IXGBE_EEPROM_CHECKSUM 0x3F
-#define IXGBE_EEPROM_SUM 0xBABA
-#define IXGBE_PCIE_ANALOG_PTR 0x03
-#define IXGBE_ATLAS0_CONFIG_PTR 0x04
-#define IXGBE_PHY_PTR 0x04
-#define IXGBE_ATLAS1_CONFIG_PTR 0x05
-#define IXGBE_OPTION_ROM_PTR 0x05
-#define IXGBE_PCIE_GENERAL_PTR 0x06
-#define IXGBE_PCIE_CONFIG0_PTR 0x07
-#define IXGBE_PCIE_CONFIG1_PTR 0x08
-#define IXGBE_CORE0_PTR 0x09
-#define IXGBE_CORE1_PTR 0x0A
-#define IXGBE_MAC0_PTR 0x0B
-#define IXGBE_MAC1_PTR 0x0C
-#define IXGBE_CSR0_CONFIG_PTR 0x0D
-#define IXGBE_CSR1_CONFIG_PTR 0x0E
-#define IXGBE_FW_PTR 0x0F
-#define IXGBE_PBANUM0_PTR 0x15
-#define IXGBE_PBANUM1_PTR 0x16
-#define IXGBE_FREE_SPACE_PTR 0X3E
+#define IXGBE_PBANUM_PTR_GUARD 0xFAFA
+#define IXGBE_EEPROM_CHECKSUM 0x3F
+#define IXGBE_EEPROM_SUM 0xBABA
+#define IXGBE_PCIE_ANALOG_PTR 0x03
+#define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_PHY_PTR 0x04
+#define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_OPTION_ROM_PTR 0x05
+#define IXGBE_PCIE_GENERAL_PTR 0x06
+#define IXGBE_PCIE_CONFIG0_PTR 0x07
+#define IXGBE_PCIE_CONFIG1_PTR 0x08
+#define IXGBE_CORE0_PTR 0x09
+#define IXGBE_CORE1_PTR 0x0A
+#define IXGBE_MAC0_PTR 0x0B
+#define IXGBE_MAC1_PTR 0x0C
+#define IXGBE_CSR0_CONFIG_PTR 0x0D
+#define IXGBE_CSR1_CONFIG_PTR 0x0E
+#define IXGBE_PCIE_ANALOG_PTR_X550 0x02
+#define IXGBE_SHADOW_RAM_SIZE_X550 0x4000
+#define IXGBE_IXGBE_PCIE_GENERAL_SIZE 0x24
+#define IXGBE_PCIE_CONFIG_SIZE 0x08
+#define IXGBE_EEPROM_LAST_WORD 0x41
+#define IXGBE_FW_PTR 0x0F
+#define IXGBE_PBANUM0_PTR 0x15
+#define IXGBE_PBANUM1_PTR 0x16
+#define IXGBE_FREE_SPACE_PTR 0X3E
/* External Thermal Sensor Config */
#define IXGBE_ETS_CFG 0x26
#define IXGBE_HI_FLASH_APPLY_TIMEOUT 0 /* Process Apply command limit */
/* CEM Support */
-#define FW_CEM_HDR_LEN 0x4
-#define FW_CEM_CMD_DRIVER_INFO 0xDD
-#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5
-#define FW_CEM_CMD_RESERVED 0x0
-#define FW_CEM_UNUSED_VER 0x0
-#define FW_CEM_MAX_RETRIES 3
-#define FW_CEM_RESP_STATUS_SUCCESS 0x1
+#define FW_CEM_HDR_LEN 0x4
+#define FW_CEM_CMD_DRIVER_INFO 0xDD
+#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5
+#define FW_CEM_CMD_RESERVED 0x0
+#define FW_CEM_UNUSED_VER 0x0
+#define FW_CEM_MAX_RETRIES 3
+#define FW_CEM_RESP_STATUS_SUCCESS 0x1
+#define FW_READ_SHADOW_RAM_CMD 0x31
+#define FW_READ_SHADOW_RAM_LEN 0x6
+#define FW_WRITE_SHADOW_RAM_CMD 0x33
+#define FW_WRITE_SHADOW_RAM_LEN 0xA /* 8 plus 1 WORD to write */
+#define FW_SHADOW_RAM_DUMP_CMD 0x36
+#define FW_SHADOW_RAM_DUMP_LEN 0
+#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */
+#define FW_NVM_DATA_OFFSET 3
+#define FW_MAX_READ_BUFFER_SIZE 1024
+#define FW_DISABLE_RXEN_CMD 0xDE
+#define FW_DISABLE_RXEN_LEN 0x1
/* Host Interface Command Structures */
struct ixgbe_hic_hdr {
u8 checksum;
};
+struct ixgbe_hic_hdr2_req {
+ u8 cmd;
+ u8 buf_lenh;
+ u8 buf_lenl;
+ u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_rsp {
+ u8 cmd;
+ u8 buf_lenl;
+ u8 buf_lenh_status; /* 7-5: high bits of buf_len, 4-0: status */
+ u8 checksum;
+};
+
+union ixgbe_hic_hdr2 {
+ struct ixgbe_hic_hdr2_req req;
+ struct ixgbe_hic_hdr2_rsp rsp;
+};
+
struct ixgbe_hic_drv_info {
struct ixgbe_hic_hdr hdr;
u8 port_num;
u16 pad2; /* end spacing to ensure length is mult. of dword2 */
};
+/* These need to be dword aligned */
+struct ixgbe_hic_read_shadow_ram {
+ union ixgbe_hic_hdr2 hdr;
+ u32 address;
+ u16 length;
+ u16 pad2;
+ u16 data;
+ u16 pad3;
+};
+
+struct ixgbe_hic_write_shadow_ram {
+ union ixgbe_hic_hdr2 hdr;
+ u32 address;
+ u16 length;
+ u16 pad2;
+ u16 data;
+ u16 pad3;
+};
+
+struct ixgbe_hic_disable_rxen {
+ struct ixgbe_hic_hdr hdr;
+ u8 port_number;
+ u8 pad2;
+ u16 pad3;
+};
+
/* Transmit Descriptor - Advanced */
union ixgbe_adv_tx_desc {
struct {
ixgbe_phy_none,
ixgbe_phy_tn,
ixgbe_phy_aq,
+ ixgbe_phy_x550em_kr,
+ ixgbe_phy_x550em_kx4,
+ ixgbe_phy_x550em_ext_t,
ixgbe_phy_cu_unknown,
ixgbe_phy_qt,
ixgbe_phy_xaui,
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
+
+ /* DMA Coalescing */
+ s32 (*dmac_config)(struct ixgbe_hw *hw);
+ s32 (*dmac_update_tcs)(struct ixgbe_hw *hw);
+ s32 (*dmac_config_tcs)(struct ixgbe_hw *hw);
};
struct ixgbe_phy_operations {
s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *);
s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16);
s32 (*setup_link)(struct ixgbe_hw *);
+ s32 (*setup_internal_link)(struct ixgbe_hw *);
s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool);
s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);
s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *);
#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P == 0) ? (0x4010) : (0x8010))
+#define IXGBE_KRM_LINK_CTRL_1(P) ((P == 0) ? (0x420C) : (0x820C))
+#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P == 0) ? (0x4634) : (0x8634))
+#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P == 0) ? (0x4638) : (0x8638))
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P == 0) ? (0x4B00) : (0x8B00))
+#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P == 0) ? (0x4E00) : (0x8E00))
+#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P == 0) ? (0x5520) : (0x9520))
+#define IXGBE_KRM_RX_ANA_CTL(P) ((P == 0) ? (0x5A00) : (0x9A00))
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B (1 << 9)
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS (1 << 11)
+
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK (0x7 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G (2 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G (4 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ (1 << 14)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC (1 << 15)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX (1 << 16)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR (1 << 18)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX (1 << 24)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR (1 << 26)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE (1 << 29)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART (1 << 31)
+
+#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN (1 << 6)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN (1 << 15)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN (1 << 16)
+
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL (1 << 4)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS (1 << 2)
+
+#define IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK (0x3 << 16)
+
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN (1 << 1)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN (1 << 2)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN (1 << 3)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN (1 << 31)
+
+#define IXGBE_KX4_LINK_CNTL_1 0x4C
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX (1 << 16)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 (1 << 17)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX (1 << 24)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX4 (1 << 25)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE (1 << 29)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_FORCE_LINK_UP (1 << 30)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART (1 << 31)
+
+#define IXGBE_SB_IOSF_INDIRECT_CTRL 0x00011144
+#define IXGBE_SB_IOSF_INDIRECT_DATA 0x00011148
+
+#define IXGBE_SB_IOSF_CTRL_ADDR_SHIFT 0
+#define IXGBE_SB_IOSF_CTRL_ADDR_MASK 0xFF
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT 18
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK \
+ (0x3 << IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT 20
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK \
+ (0xFF << IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT 28
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_MASK 0x7
+#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT 31
+#define IXGBE_SB_IOSF_CTRL_BUSY (1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
+#define IXGBE_SB_IOSF_TARGET_KR_PHY 0
+#define IXGBE_SB_IOSF_TARGET_KX4_UNIPHY 1
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS0 2
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS1 3
+
#endif /* _IXGBE_TYPE_H_ */
--- /dev/null
+/*******************************************************************************
+ *
+ * Intel 10 Gigabit PCI Express Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+/** ixgbe_identify_phy_x550em - Get PHY type based on device id
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
+{
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ /* set up for CS4227 usage */
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+ if (hw->bus.lan_id) {
+ esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+ esdp |= IXGBE_ESDP_SDP1_DIR;
+ }
+ esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+
+ return ixgbe_identify_module_generic(hw);
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ hw->phy.type = ixgbe_phy_x550em_kx4;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ hw->phy.type = ixgbe_phy_x550em_kr;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ return ixgbe_identify_phy_generic(hw);
+ default:
+ break;
+ }
+ return 0;
+}
+
+static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = ixgbe_flash;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+ hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return 0;
+}
+
+/** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the
+ * IOSF device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @phy_data: Pointer to read data from the register
+ **/
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *data)
+{
+ u32 i, command, error;
+
+ command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+ (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+ /* Write IOSF control register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+ /* Check every 10 usec to see if the address cycle completed.
+ * The SB IOSF BUSY bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usleep_range(10, 20);
+
+ command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+ if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+ error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+ IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+ hw_dbg(hw, "Failed to read, error %x\n", error);
+ return IXGBE_ERR_PHY;
+ }
+
+ if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+ hw_dbg(hw, "Read timed out\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
+
+ return 0;
+}
+
+/** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface
+ * command assuming that the semaphore is already obtained.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ s32 status;
+ struct ixgbe_hic_read_shadow_ram buffer;
+
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = cpu_to_be32(offset * 2);
+ /* one word */
+ buffer.length = cpu_to_be16(sizeof(u16));
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, false);
+ if (status)
+ return status;
+
+ *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ FW_NVM_DATA_OFFSET);
+
+ return 0;
+}
+
+/** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ struct ixgbe_hic_read_shadow_ram buffer;
+ u32 current_word = 0;
+ u16 words_to_read;
+ s32 status;
+ u32 i;
+
+ /* Take semaphore for the entire operation. */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ if (status) {
+ hw_dbg(hw, "EEPROM read buffer - semaphore failed\n");
+ return status;
+ }
+
+ while (words) {
+ if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+ words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+ else
+ words_to_read = words;
+
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = cpu_to_be32((offset + current_word) * 2);
+ buffer.length = cpu_to_be16(words_to_read * 2);
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT,
+ false);
+ if (status) {
+ hw_dbg(hw, "Host interface command failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < words_to_read; i++) {
+ u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
+ 2 * i;
+ u32 value = IXGBE_READ_REG(hw, reg);
+
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ i++;
+ if (i < words_to_read) {
+ value >>= 16;
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ }
+ }
+ words -= words_to_read;
+ }
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/** ixgbe_checksum_ptr_x550 - Checksum one pointer region
+ * @hw: pointer to hardware structure
+ * @ptr: pointer offset in eeprom
+ * @size: size of section pointed by ptr, if 0 first word will be used as size
+ * @csum: address of checksum to update
+ *
+ * Returns error status for any failure
+ **/
+static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
+ u16 size, u16 *csum, u16 *buffer,
+ u32 buffer_size)
+{
+ u16 buf[256];
+ s32 status;
+ u16 length, bufsz, i, start;
+ u16 *local_buffer;
+
+ bufsz = sizeof(buf) / sizeof(buf[0]);
+
+ /* Read a chunk at the pointer location */
+ if (!buffer) {
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
+ if (status) {
+ hw_dbg(hw, "Failed to read EEPROM image\n");
+ return status;
+ }
+ local_buffer = buf;
+ } else {
+ if (buffer_size < ptr)
+ return IXGBE_ERR_PARAM;
+ local_buffer = &buffer[ptr];
+ }
+
+ if (size) {
+ start = 0;
+ length = size;
+ } else {
+ start = 1;
+ length = local_buffer[0];
+
+ /* Skip pointer section if length is invalid. */
+ if (length == 0xFFFF || length == 0 ||
+ (ptr + length) >= hw->eeprom.word_size)
+ return 0;
+ }
+
+ if (buffer && ((u32)start + (u32)length > buffer_size))
+ return IXGBE_ERR_PARAM;
+
+ for (i = start; length; i++, length--) {
+ if (i == bufsz && !buffer) {
+ ptr += bufsz;
+ i = 0;
+ if (length < bufsz)
+ bufsz = length;
+
+ /* Read a chunk at the pointer location */
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
+ bufsz, buf);
+ if (status) {
+ hw_dbg(hw, "Failed to read EEPROM image\n");
+ return status;
+ }
+ }
+ *csum += local_buffer[i];
+ }
+ return 0;
+}
+
+/** ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ * @buffer: pointer to buffer containing calculated checksum
+ * @buffer_size: size of buffer
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
+{
+ u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
+ u16 *local_buffer;
+ s32 status;
+ u16 checksum = 0;
+ u16 pointer, i, size;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (!buffer) {
+ /* Read pointer area */
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
+ IXGBE_EEPROM_LAST_WORD + 1,
+ eeprom_ptrs);
+ if (status) {
+ hw_dbg(hw, "Failed to read EEPROM image\n");
+ return status;
+ }
+ local_buffer = eeprom_ptrs;
+ } else {
+ if (buffer_size < IXGBE_EEPROM_LAST_WORD)
+ return IXGBE_ERR_PARAM;
+ local_buffer = buffer;
+ }
+
+ /* For X550 hardware include 0x0-0x41 in the checksum, skip the
+ * checksum word itself
+ */
+ for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
+ if (i != IXGBE_EEPROM_CHECKSUM)
+ checksum += local_buffer[i];
+
+ /* Include all data from pointers 0x3, 0x6-0xE. This excludes the
+ * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+ */
+ for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
+ if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+ continue;
+
+ pointer = local_buffer[i];
+
+ /* Skip pointer section if the pointer is invalid. */
+ if (pointer == 0xFFFF || pointer == 0 ||
+ pointer >= hw->eeprom.word_size)
+ continue;
+
+ switch (i) {
+ case IXGBE_PCIE_GENERAL_PTR:
+ size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
+ break;
+ case IXGBE_PCIE_CONFIG0_PTR:
+ case IXGBE_PCIE_CONFIG1_PTR:
+ size = IXGBE_PCIE_CONFIG_SIZE;
+ break;
+ default:
+ size = 0;
+ break;
+ }
+
+ status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
+ buffer, buffer_size);
+ if (status)
+ return status;
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return (s32)checksum;
+}
+
+/** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+ return ixgbe_calc_checksum_X550(hw, NULL, 0);
+}
+
+/** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+ status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ return status;
+ }
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+ if (status)
+ return status;
+
+ /* Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum) {
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+ hw_dbg(hw, "Invalid EEPROM checksum");
+ }
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+
+ return status;
+}
+
+/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status;
+ struct ixgbe_hic_write_shadow_ram buffer;
+
+ buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* one word */
+ buffer.length = cpu_to_be16(sizeof(u16));
+ buffer.data = data;
+ buffer.address = cpu_to_be32(offset * 2);
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, false);
+ return status;
+}
+
+/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+ status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ hw_dbg(hw, "write ee hostif failed to get semaphore");
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ **/
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ union ixgbe_hic_hdr2 buffer;
+
+ buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
+ buffer.req.buf_lenh = 0;
+ buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
+ buffer.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, false);
+ return status;
+}
+
+/** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum = 0;
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
+ if (status) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ return status;
+ }
+
+ status = ixgbe_calc_eeprom_checksum_X550(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+ if (status)
+ return status;
+
+ status = ixgbe_update_flash_X550(hw);
+
+ return status;
+}
+
+/** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ *
+ * Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = 0;
+ u32 i = 0;
+
+ /* Take semaphore for the entire operation. */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ if (status) {
+ hw_dbg(hw, "EEPROM write buffer - semaphore failed\n");
+ return status;
+ }
+
+ for (i = 0; i < words; i++) {
+ status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
+ data[i]);
+ if (status) {
+ hw_dbg(hw, "Eeprom buffered write failed\n");
+ break;
+ }
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ return status;
+}
+
+/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ * @hw: pointer to hardware structure
+ **/
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ /* CS4227 does not support autoneg, so disable the laser control
+ * functions for SFP+ fiber
+ */
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
+ }
+}
+
+/** ixgbe_setup_sfp_modules_X550em - Setup SFP module
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
+{
+ bool setup_linear;
+ u16 reg_slice, edc_mode;
+ s32 ret_val;
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_unknown:
+ return 0;
+ case ixgbe_sfp_type_not_present:
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+ case ixgbe_sfp_type_da_cu_core0:
+ case ixgbe_sfp_type_da_cu_core1:
+ setup_linear = true;
+ break;
+ case ixgbe_sfp_type_srlr_core0:
+ case ixgbe_sfp_type_srlr_core1:
+ case ixgbe_sfp_type_da_act_lmt_core0:
+ case ixgbe_sfp_type_da_act_lmt_core1:
+ case ixgbe_sfp_type_1g_sx_core0:
+ case ixgbe_sfp_type_1g_sx_core1:
+ setup_linear = false;
+ break;
+ default:
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ ixgbe_init_mac_link_ops_X550em(hw);
+ hw->phy.ops.reset = NULL;
+
+ /* The CS4227 slice address is the base address + the port-pair reg
+ * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0.
+ */
+ reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12);
+
+ if (setup_linear)
+ edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ else
+ edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+
+ /* Configure CS4227 for connection type. */
+ ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ edc_mode);
+
+ if (ret_val)
+ ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice,
+ edc_mode);
+
+ return ret_val;
+}
+
+/** ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ **/
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ /* SFP */
+ if (hw->phy.media_type == ixgbe_media_type_fiber) {
+ /* CS4227 SFP must not enable auto-negotiation */
+ *autoneg = false;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ return 0;
+ }
+
+ /* Link capabilities are based on SFP */
+ if (hw->phy.multispeed_fiber)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ } else {
+ *speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ }
+ return 0;
+}
+
+/** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the
+ * IOSF device
+ *
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Data to write to the register
+ **/
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 data)
+{
+ u32 i, command, error;
+
+ command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+ (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+ /* Write IOSF control register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+ /* Write IOSF data register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
+
+ /* Check every 10 usec to see if the address cycle completed.
+ * The SB IOSF BUSY bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usleep_range(10, 20);
+
+ command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+ if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+ error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+ IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+ hw_dbg(hw, "Failed to write, error %x\n", error);
+ return IXGBE_ERR_PHY;
+ }
+
+ if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+ hw_dbg(hw, "Write timed out\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ *
+ * Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ * internal and external PHY at a specific speed, without autonegotiation.
+ **/
+static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+ s32 status;
+ u32 reg_val;
+
+ /* Disable AN and force speed to 10G Serial. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+ /* Select forced link speed for internal PHY. */
+ switch (*speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+ break;
+ default:
+ /* Other link speeds are not supported by internal KR PHY. */
+ return IXGBE_ERR_LINK_SETUP;
+ }
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status)
+ return status;
+
+ /* Disable training protocol FSM. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status)
+ return status;
+
+ /* Disable Flex from training TXFFE. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status)
+ return status;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status)
+ return status;
+
+ /* Enable override for coefficients. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status)
+ return status;
+
+ /* Toggle port SW reset by AN reset. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KX4 PHY.
+ **/
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
+ hw->bus.lan_id, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
+ IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
+
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
+
+ /* Advertise 10G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
+
+ /* Advertise 1G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
+ hw->bus.lan_id, reg_val);
+
+ return status;
+}
+
+/** ixgbe_setup_kr_x550em - Configure the KR PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KR PHY.
+ **/
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ;
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+ reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
+
+ /* Advertise 10G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
+
+ /* Advertise 1G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/** ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY
+ * @hw: point to hardware structure
+ *
+ * Configures the integrated KR PHY to talk to the external PHY. The base
+ * driver will call this function when it gets notification via interrupt from
+ * the external PHY. This function forces the internal PHY into iXFI mode at
+ * the correct speed.
+ *
+ * A return of a non-zero value indicates an error, and the base driver should
+ * not report link up.
+ **/
+s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 lasi, autoneg_status, speed;
+ ixgbe_link_speed force_speed;
+
+ /* Verify that the external link status has changed */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &lasi);
+ if (status)
+ return status;
+
+ /* If there was no change in link status, we can just exit */
+ if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM))
+ return 0;
+
+ /* we read this twice back to back to indicate current status */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+ if (status)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+ if (status)
+ return status;
+
+ /* If link is not up return an error indicating treat link as down */
+ if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+ return IXGBE_ERR_INVALID_LINK_SETTINGS;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &speed);
+
+ /* clear everything but the speed and duplex bits */
+ speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
+
+ switch (speed) {
+ case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
+ force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
+ force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ default:
+ /* Internal PHY does not support anything else */
+ return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ }
+
+ return ixgbe_setup_ixfi_x550em(hw, &force_speed);
+}
+
+/** ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ **/
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
+{
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 esdp;
+
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+
+ if (hw->bus.lan_id) {
+ esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+ esdp |= IXGBE_ESDP_SDP1_DIR;
+ }
+ esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ }
+
+ /* Identify the PHY or SFP module */
+ ret_val = phy->ops.identify(hw);
+
+ /* Setup function pointers based on detected SFP module and speeds */
+ ixgbe_init_mac_link_ops_X550em(hw);
+ if (phy->sfp_type != ixgbe_sfp_type_unknown)
+ phy->ops.reset = NULL;
+
+ /* Set functions pointers based on phy type */
+ switch (hw->phy.type) {
+ case ixgbe_phy_x550em_kx4:
+ phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
+ case ixgbe_phy_x550em_kr:
+ phy->ops.setup_link = ixgbe_setup_kr_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
+ case ixgbe_phy_x550em_ext_t:
+ phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em;
+ break;
+ default:
+ break;
+ }
+ return ret_val;
+}
+
+/** ixgbe_get_media_type_X550em - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ *
+ */
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ media_type = ixgbe_media_type_copper;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+ return media_type;
+}
+
+/** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
+ ** @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 reg;
+ u32 retries = 2;
+
+ do {
+ /* decrement retries counter and exit if we hit 0 */
+ if (retries < 1) {
+ hw_dbg(hw, "External PHY not yet finished resetting.");
+ return IXGBE_ERR_PHY;
+ }
+ retries--;
+
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ ®);
+ if (status)
+ return status;
+
+ /* Verify PHY FW reset has completed */
+ } while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1);
+
+ /* Set port to low power mode */
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+ if (status)
+ return status;
+
+ /* Enable the transmitter */
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ ®);
+ if (status)
+ return status;
+
+ reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE;
+
+ status = hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ reg);
+ if (status)
+ return status;
+
+ /* Un-stall the PHY FW */
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_GLOBAL_RES_PR_10,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+ if (status)
+ return status;
+
+ reg &= ~IXGBE_MDIO_POWER_UP_STALL;
+
+ status = hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_GLOBAL_RES_PR_10,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+ return status;
+}
+
+/** ixgbe_reset_hw_X550em - Perform hardware reset
+ ** @hw: pointer to hardware structure
+ **
+ ** Resets the hardware by resetting the transmit and receive units, masks
+ ** and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ ** reset.
+ **/
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed link_speed;
+ s32 status;
+ u32 ctrl = 0;
+ u32 i;
+ bool link_up = false;
+
+ /* Call adapter stop to disable Tx/Rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status)
+ return status;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Identify PHY and related function pointers */
+ status = hw->phy.ops.init(hw);
+
+ /* start the external PHY */
+ if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+ status = ixgbe_init_ext_t_x550em(hw);
+ if (status)
+ return status;
+ }
+
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = false;
+ }
+
+ /* Reset PHY */
+ if (!hw->phy.reset_disable && hw->phy.ops.reset)
+ hw->phy.ops.reset(hw);
+
+mac_reset_top:
+ /* Issue global reset to the MAC. Needs to be SW reset if link is up.
+ * If link reset is used when link is up, it might reset the PHY when
+ * mng is using it. If link is down or the flag to force full link
+ * reset is set, then perform link reset.
+ */
+ ctrl = IXGBE_CTRL_LNK_RST;
+
+ if (!hw->force_full_reset) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up)
+ ctrl = IXGBE_CTRL_RST;
+ }
+
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear meaning reset is complete */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "Reset polling failed to complete.\n");
+ }
+
+ msleep(50);
+
+ /* Double resets are required for recovery from certain error
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /* Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ return status;
+}
+
+#define X550_COMMON_MAC \
+ .init_hw = &ixgbe_init_hw_generic, \
+ .start_hw = &ixgbe_start_hw_X540, \
+ .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, \
+ .enable_rx_dma = &ixgbe_enable_rx_dma_generic, \
+ .get_mac_addr = &ixgbe_get_mac_addr_generic, \
+ .get_device_caps = &ixgbe_get_device_caps_generic, \
+ .stop_adapter = &ixgbe_stop_adapter_generic, \
+ .get_bus_info = &ixgbe_get_bus_info_generic, \
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \
+ .read_analog_reg8 = NULL, \
+ .write_analog_reg8 = NULL, \
+ .set_rxpba = &ixgbe_set_rxpba_generic, \
+ .check_link = &ixgbe_check_mac_link_generic, \
+ .led_on = &ixgbe_led_on_generic, \
+ .led_off = &ixgbe_led_off_generic, \
+ .blink_led_start = &ixgbe_blink_led_start_X540, \
+ .blink_led_stop = &ixgbe_blink_led_stop_X540, \
+ .set_rar = &ixgbe_set_rar_generic, \
+ .clear_rar = &ixgbe_clear_rar_generic, \
+ .set_vmdq = &ixgbe_set_vmdq_generic, \
+ .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, \
+ .clear_vmdq = &ixgbe_clear_vmdq_generic, \
+ .init_rx_addrs = &ixgbe_init_rx_addrs_generic, \
+ .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, \
+ .enable_mc = &ixgbe_enable_mc_generic, \
+ .disable_mc = &ixgbe_disable_mc_generic, \
+ .clear_vfta = &ixgbe_clear_vfta_generic, \
+ .set_vfta = &ixgbe_set_vfta_generic, \
+ .fc_enable = &ixgbe_fc_enable_generic, \
+ .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, \
+ .init_uta_tables = &ixgbe_init_uta_tables_generic, \
+ .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, \
+ .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, \
+ .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, \
+ .release_swfw_sync = &ixgbe_release_swfw_sync_X540, \
+ .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \
+ .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \
+ .get_thermal_sensor_data = NULL, \
+ .init_thermal_sensor_thresh = NULL, \
+ .prot_autoc_read = &prot_autoc_read_generic, \
+ .prot_autoc_write = &prot_autoc_write_generic, \
+
+static struct ixgbe_mac_operations mac_ops_X550 = {
+ X550_COMMON_MAC
+ .reset_hw = &ixgbe_reset_hw_X540,
+ .get_media_type = &ixgbe_get_media_type_X540,
+ .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
+ .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
+ .setup_link = &ixgbe_setup_mac_link_X540,
+ .set_rxpba = &ixgbe_set_rxpba_generic,
+ .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
+ .setup_sfp = NULL,
+};
+
+static struct ixgbe_mac_operations mac_ops_X550EM_x = {
+ X550_COMMON_MAC
+ .reset_hw = &ixgbe_reset_hw_X550em,
+ .get_media_type = &ixgbe_get_media_type_X550em,
+ .get_san_mac_addr = NULL,
+ .get_wwn_prefix = NULL,
+ .setup_link = NULL, /* defined later */
+ .get_link_capabilities = &ixgbe_get_link_capabilities_X550em,
+ .setup_sfp = ixgbe_setup_sfp_modules_X550em,
+
+};
+
+#define X550_COMMON_EEP \
+ .read = &ixgbe_read_ee_hostif_X550, \
+ .read_buffer = &ixgbe_read_ee_hostif_buffer_X550, \
+ .write = &ixgbe_write_ee_hostif_X550, \
+ .write_buffer = &ixgbe_write_ee_hostif_buffer_X550, \
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_X550, \
+ .update_checksum = &ixgbe_update_eeprom_checksum_X550, \
+ .calc_checksum = &ixgbe_calc_eeprom_checksum_X550, \
+
+static struct ixgbe_eeprom_operations eeprom_ops_X550 = {
+ X550_COMMON_EEP
+ .init_params = &ixgbe_init_eeprom_params_X550,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
+ X550_COMMON_EEP
+ .init_params = &ixgbe_init_eeprom_params_X540,
+};
+
+#define X550_COMMON_PHY \
+ .identify_sfp = &ixgbe_identify_module_generic, \
+ .reset = NULL, \
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, \
+ .read_i2c_byte = &ixgbe_read_i2c_byte_generic, \
+ .write_i2c_byte = &ixgbe_write_i2c_byte_generic, \
+ .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \
+ .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \
+ .check_overtemp = &ixgbe_tn_check_overtemp, \
+ .get_firmware_version = &ixgbe_get_phy_firmware_version_generic,
+
+static struct ixgbe_phy_operations phy_ops_X550 = {
+ X550_COMMON_PHY
+ .init = NULL,
+ .identify = &ixgbe_identify_phy_generic,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .read_i2c_combined = &ixgbe_read_i2c_combined_generic,
+ .write_i2c_combined = &ixgbe_write_i2c_combined_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_X550EM_x = {
+ X550_COMMON_PHY
+ .init = &ixgbe_init_phy_ops_X550em,
+ .identify = &ixgbe_identify_phy_x550em,
+ .read_reg = NULL, /* defined later */
+ .write_reg = NULL, /* defined later */
+ .setup_link = NULL, /* defined later */
+};
+
+struct ixgbe_info ixgbe_X550_info = {
+ .mac = ixgbe_mac_X550,
+ .get_invariants = &ixgbe_get_invariants_X540,
+ .mac_ops = &mac_ops_X550,
+ .eeprom_ops = &eeprom_ops_X550,
+ .phy_ops = &phy_ops_X550,
+ .mbx_ops = &mbx_ops_generic,
+};
+
+struct ixgbe_info ixgbe_X550EM_x_info = {
+ .mac = ixgbe_mac_X550EM_x,
+ .get_invariants = &ixgbe_get_invariants_X540,
+ .mac_ops = &mac_ops_X550EM_x,
+ .eeprom_ops = &eeprom_ops_X550EM_x,
+ .phy_ops = &phy_ops_X550EM_x,
+ .mbx_ops = &mbx_ops_generic,
+};
projects / mirror_ubuntu-jammy-kernel.git / commitdiff