lis3: interrupt handlers for 8bit wakeup and click events

Content for the 8bit device threaded interrupt handlers.  Depending on the
interrupt line and chip configuration, either click or wakeup / freefall
handler is called.  In case of click, BTN_ event is sent via input device.
 In case of wakeup or freefall, input device ABS_ events are updated
immediatelly.

It is still possible to configure interrupt line 1 for fast freefall
detection and use the second line either for click or threshold based
interrupts.  Or both lines can be used for click / threshold interrupts.

Polled input device can be set to stopped state and still get coordinate
updates via input device using interrupt based method.  Polled mode and
interrupt mode can also be used parallel.

BTN_ events are remapped based on existing axis remapping information.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 3c06350bae3afb09ff56ca2c9a9ac467fcb58290..56a1d34d36705293e57ae36d66b9e6c770f340c7 100644 (file)
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -121,11 +121,9 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
        int position[3];
        int i;
 
-       mutex_lock(&lis3->mutex);
        position[0] = lis3->read_data(lis3, OUTX);
        position[1] = lis3->read_data(lis3, OUTY);
        position[2] = lis3->read_data(lis3, OUTZ);
-       mutex_unlock(&lis3->mutex);
 
        for (i = 0; i < 3; i++)
                position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY;
@@ -249,6 +247,19 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3)
 EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
 
 
+static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
+{
+       int x, y, z;
+
+       mutex_lock(&lis3_dev.mutex);
+       lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+       input_report_abs(pidev->input, ABS_X, x);
+       input_report_abs(pidev->input, ABS_Y, y);
+       input_report_abs(pidev->input, ABS_Z, z);
+       input_sync(pidev->input);
+       mutex_unlock(&lis3_dev.mutex);
+}
+
 static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
 {
        if (!test_bit(0, &lis3_dev.misc_opened))
@@ -270,13 +281,71 @@ out:
        return IRQ_HANDLED;
 }
 
+static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3)
+{
+       struct input_dev *dev = lis3->idev->input;
+       u8 click_src;
+
+       mutex_lock(&lis3->mutex);
+       lis3->read(lis3, CLICK_SRC, &click_src);
+
+       if (click_src & CLICK_SINGLE_X) {
+               input_report_key(dev, lis3->mapped_btns[0], 1);
+               input_report_key(dev, lis3->mapped_btns[0], 0);
+       }
+
+       if (click_src & CLICK_SINGLE_Y) {
+               input_report_key(dev, lis3->mapped_btns[1], 1);
+               input_report_key(dev, lis3->mapped_btns[1], 0);
+       }
+
+       if (click_src & CLICK_SINGLE_Z) {
+               input_report_key(dev, lis3->mapped_btns[2], 1);
+               input_report_key(dev, lis3->mapped_btns[2], 0);
+       }
+       input_sync(dev);
+       mutex_unlock(&lis3->mutex);
+}
+
+static void lis302dl_interrupt_handle_ff_wu(struct lis3lv02d *lis3)
+{
+       u8 wu1_src;
+       u8 wu2_src;
+
+       lis3->read(lis3, FF_WU_SRC_1, &wu1_src);
+       lis3->read(lis3, FF_WU_SRC_2, &wu2_src);
+
+       wu1_src = wu1_src & FF_WU_SRC_IA ? wu1_src : 0;
+       wu2_src = wu2_src & FF_WU_SRC_IA ? wu2_src : 0;
+
+       /* joystick poll is internally protected by the lis3->mutex. */
+       if (wu1_src || wu2_src)
+               lis3lv02d_joystick_poll(lis3_dev.idev);
+}
+
 static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data)
 {
+
+       struct lis3lv02d *lis3 = data;
+
+       if ((lis3->pdata->irq_cfg & LIS3_IRQ1_MASK) == LIS3_IRQ1_CLICK)
+               lis302dl_interrupt_handle_click(lis3);
+       else
+               lis302dl_interrupt_handle_ff_wu(lis3);
+
        return IRQ_HANDLED;
 }
 
 static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data)
 {
+
+       struct lis3lv02d *lis3 = data;
+
+       if ((lis3->pdata->irq_cfg & LIS3_IRQ2_MASK) == LIS3_IRQ2_CLICK)
+               lis302dl_interrupt_handle_click(lis3);
+       else
+               lis302dl_interrupt_handle_ff_wu(lis3);
+
        return IRQ_HANDLED;
 }
 
@@ -374,22 +443,12 @@ static struct miscdevice lis3lv02d_misc_device = {
        .fops    = &lis3lv02d_misc_fops,
 };
 
-static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
-{
-       int x, y, z;
-
-       lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
-       input_report_abs(pidev->input, ABS_X, x);
-       input_report_abs(pidev->input, ABS_Y, y);
-       input_report_abs(pidev->input, ABS_Z, z);
-       input_sync(pidev->input);
-}
-
 int lis3lv02d_joystick_enable(void)
 {
        struct input_dev *input_dev;
        int err;
        int max_val, fuzz, flat;
+       int btns[] = {BTN_X, BTN_Y, BTN_Z};
 
        if (lis3_dev.idev)
                return -EINVAL;
@@ -416,6 +475,10 @@ int lis3lv02d_joystick_enable(void)
        input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
        input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);
 
+       lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns);
+       lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns);
+       lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns);
+
        err = input_register_polled_device(lis3_dev.idev);
        if (err) {
                input_free_polled_device(lis3_dev.idev);
@@ -461,7 +524,9 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
 {
        int x, y, z;
 
+       mutex_lock(&lis3_dev.mutex);
        lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+       mutex_unlock(&lis3_dev.mutex);
        return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
 }
 
@@ -535,6 +600,13 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
                dev->write(dev, CLICK_THSY_X,
                        (p->click_thresh_x & 0xf) |
                        (p->click_thresh_y << 4));
+
+               if (dev->idev) {
+                       struct input_dev *input_dev = lis3_dev.idev->input;
+                       input_set_capability(input_dev, EV_KEY, BTN_X);
+                       input_set_capability(input_dev, EV_KEY, BTN_Y);
+                       input_set_capability(input_dev, EV_KEY, BTN_Z);
+               }
        }
 
        if (p->wakeup_flags) {

diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 692e2442ce0851e3b6880ca9e32d429adcbed836..854091380e33887c365898a867af46e70964dee5 100644 (file)
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -233,6 +233,7 @@ struct lis3lv02d {
        struct platform_device  *pdev;     /* platform device */
        atomic_t                count;     /* interrupt count after last read */
        struct axis_conversion  ac;        /* hw -> logical axis */
+       int                     mapped_btns[3];
 
        u32                     irq;       /* IRQ number */
        struct fasync_struct    *async_queue; /* queue for the misc device */

diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
index fd289b1e1ec1882851b57ce1b1cab51056aafd63..0e8a346424bb6d4d1ec162ff26fb933f4fce92ef 100644 (file)
--- a/include/linux/lis3lv02d.h
+++ b/include/linux/lis3lv02d.h
@@ -25,12 +25,14 @@ struct lis3lv02d_platform_data {
 #define LIS3_IRQ1_FF_WU_12     (3 << 0)
 #define LIS3_IRQ1_DATA_READY   (4 << 0)
 #define LIS3_IRQ1_CLICK                (7 << 0)
+#define LIS3_IRQ1_MASK         (7 << 0)
 #define LIS3_IRQ2_DISABLE      (0 << 3)
 #define LIS3_IRQ2_FF_WU_1      (1 << 3)
 #define LIS3_IRQ2_FF_WU_2      (2 << 3)
 #define LIS3_IRQ2_FF_WU_12     (3 << 3)
 #define LIS3_IRQ2_DATA_READY   (4 << 3)
 #define LIS3_IRQ2_CLICK                (7 << 3)
+#define LIS3_IRQ2_MASK         (7 << 3)
 #define LIS3_IRQ_OPEN_DRAIN    (1 << 6)
 #define LIS3_IRQ_ACTIVE_LOW    (1 << 7)
        unsigned char irq_cfg;