Some clocks (such as the USB PHY clocks in DA8xx) will need to use iomem.
The davinci_common_init() function must be called before the ioremap, so
the clock init is now split out as separate function.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* than that used by default in <soc>.c file. The reference clock rate
* should be updated early in the boot process; ideally soon after the
* clock tree has been initialized once with the default reference clock
- * rate (davinci_common_init()).
+ * rate (davinci_clk_init()).
*
* Returns 0 on success, error otherwise.
*/
if (ret < 0)
goto err;
- if (davinci_soc_info.cpu_clks) {
- ret = davinci_clk_init(davinci_soc_info.cpu_clks);
-
- if (ret != 0)
- goto err;
- }
return;
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+
+ davinci_clk_init(davinci_soc_info_da830.cpu_clks);
}
v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+ davinci_clk_init(davinci_soc_info_da850.cpu_clks);
}
{
davinci_common_init(&davinci_soc_info_dm355);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
{
davinci_common_init(&davinci_soc_info_dm365);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
}
static struct resource dm365_vpss_resources[] = {
{
davinci_common_init(&davinci_soc_info_dm644x);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
{
davinci_common_init(&davinci_soc_info_dm646x);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
}
static int __init dm646x_init_devices(void)