--- /dev/null
+.TH CAKE 8 "19 July 2018" "iproute2" "Linux"
+.SH NAME
+CAKE \- Common Applications Kept Enhanced (CAKE)
+.SH SYNOPSIS
+.B tc qdisc ... cake
+.br
+[
+.BR bandwidth
+RATE |
+.BR unlimited*
+|
+.BR autorate_ingress
+]
+.br
+[
+.BR rtt
+TIME |
+.BR datacentre
+|
+.BR lan
+|
+.BR metro
+|
+.BR regional
+|
+.BR internet*
+|
+.BR oceanic
+|
+.BR satellite
+|
+.BR interplanetary
+]
+.br
+[
+.BR besteffort
+|
+.BR diffserv8
+|
+.BR diffserv4
+|
+.BR diffserv3*
+]
+.br
+[
+.BR flowblind
+|
+.BR srchost
+|
+.BR dsthost
+|
+.BR hosts
+|
+.BR flows
+|
+.BR dual-srchost
+|
+.BR dual-dsthost
+|
+.BR triple-isolate*
+]
+.br
+[
+.BR nat
+|
+.BR nonat*
+]
+.br
+[
+.BR wash
+|
+.BR nowash*
+]
+.br
+[
+.BR ack-filter
+|
+.BR ack-filter-aggressive
+|
+.BR no-ack-filter*
+]
+.br
+[
+.BR memlimit
+LIMIT ]
+.br
+[
+.BR ptm
+|
+.BR atm
+|
+.BR noatm*
+]
+.br
+[
+.BR overhead
+N |
+.BR conservative
+|
+.BR raw*
+]
+.br
+[
+.BR mpu
+N ]
+.br
+[
+.BR ingress
+|
+.BR egress*
+]
+.br
+(* marks defaults)
+
+
+.SH DESCRIPTION
+CAKE (Common Applications Kept Enhanced) is a shaping-capable queue discipline
+which uses both AQM and FQ. It combines COBALT, which is an AQM algorithm
+combining Codel and BLUE, a shaper which operates in deficit mode, and a variant
+of DRR++ for flow isolation. 8-way set-associative hashing is used to virtually
+eliminate hash collisions. Priority queuing is available through a simplified
+diffserv implementation. Overhead compensation for various encapsulation
+schemes is tightly integrated.
+
+All settings are optional; the default settings are chosen to be sensible in
+most common deployments. Most people will only need to set the
+.B bandwidth
+parameter to get useful results, but reading the
+.B Overhead Compensation
+and
+.B Round Trip Time
+sections is strongly encouraged.
+
+.SH SHAPER PARAMETERS
+CAKE uses a deficit-mode shaper, which does not exhibit the initial burst
+typical of token-bucket shapers. It will automatically burst precisely as much
+as required to maintain the configured throughput. As such, it is very
+straightforward to configure.
+.PP
+.B unlimited
+(default)
+.br
+ No limit on the bandwidth.
+.PP
+.B bandwidth
+RATE
+.br
+ Set the shaper bandwidth. See
+.BR tc(8)
+or examples below for details of the RATE value.
+.PP
+.B autorate_ingress
+.br
+ Automatic capacity estimation based on traffic arriving at this qdisc.
+This is most likely to be useful with cellular links, which tend to change
+quality randomly. A
+.B bandwidth
+parameter can be used in conjunction to specify an initial estimate. The shaper
+will periodically be set to a bandwidth slightly below the estimated rate. This
+estimator cannot estimate the bandwidth of links downstream of itself.
+
+.SH OVERHEAD COMPENSATION PARAMETERS
+The size of each packet on the wire may differ from that seen by Linux. The
+following parameters allow CAKE to compensate for this difference by internally
+considering each packet to be bigger than Linux informs it. To assist users who
+are not expert network engineers, keywords have been provided to represent a
+number of common link technologies.
+
+.SS Manual Overhead Specification
+.B overhead
+BYTES
+.br
+ Adds BYTES to the size of each packet. BYTES may be negative; values
+between -64 and 256 (inclusive) are accepted.
+.PP
+.B mpu
+BYTES
+.br
+ Rounds each packet (including overhead) up to a minimum length
+BYTES. BYTES may not be negative; values between 0 and 256 (inclusive)
+are accepted.
+.PP
+.B atm
+.br
+ Compensates for ATM cell framing, which is normally found on ADSL links.
+This is performed after the
+.B overhead
+parameter above. ATM uses fixed 53-byte cells, each of which can carry 48 bytes
+payload.
+.PP
+.B ptm
+.br
+ Compensates for PTM encoding, which is normally found on VDSL2 links and
+uses a 64b/65b encoding scheme. It is even more efficient to simply
+derate the specified shaper bandwidth by a factor of 64/65 or 0.984. See
+ITU G.992.3 Annex N and IEEE 802.3 Section 61.3 for details.
+.PP
+.B noatm
+.br
+ Disables ATM and PTM compensation.
+
+.SS Failsafe Overhead Keywords
+These two keywords are provided for quick-and-dirty setup. Use them if you
+can't be bothered to read the rest of this section.
+.PP
+.B raw
+(default)
+.br
+ Turns off all overhead compensation in CAKE. The packet size reported
+by Linux will be used directly.
+.PP
+ Other overhead keywords may be added after "raw". The effect of this is
+to make the overhead compensation operate relative to the reported packet size,
+not the underlying IP packet size.
+.PP
+.B conservative
+.br
+ Compensates for more overhead than is likely to occur on any
+widely-deployed link technology.
+.br
+ Equivalent to
+.B overhead 48 atm.
+
+.SS ADSL Overhead Keywords
+Most ADSL modems have a way to check which framing scheme is in use. Often this
+is also specified in the settings document provided by the ISP. The keywords in
+this section are intended to correspond with these sources of information. All
+of them implicitly set the
+.B atm
+flag.
+.PP
+.B pppoa-vcmux
+.br
+ Equivalent to
+.B overhead 10 atm
+.PP
+.B pppoa-llc
+.br
+ Equivalent to
+.B overhead 14 atm
+.PP
+.B pppoe-vcmux
+.br
+ Equivalent to
+.B overhead 32 atm
+.PP
+.B pppoe-llcsnap
+.br
+ Equivalent to
+.B overhead 40 atm
+.PP
+.B bridged-vcmux
+.br
+ Equivalent to
+.B overhead 24 atm
+.PP
+.B bridged-llcsnap
+.br
+ Equivalent to
+.B overhead 32 atm
+.PP
+.B ipoa-vcmux
+.br
+ Equivalent to
+.B overhead 8 atm
+.PP
+.B ipoa-llcsnap
+.br
+ Equivalent to
+.B overhead 16 atm
+.PP
+See also the Ethernet Correction Factors section below.
+
+.SS VDSL2 Overhead Keywords
+ATM was dropped from VDSL2 in favour of PTM, which is a much more
+straightforward framing scheme. Some ISPs retained PPPoE for compatibility with
+their existing back-end systems.
+.PP
+.B pppoe-ptm
+.br
+ Equivalent to
+.B overhead 30 ptm
+
+.br
+ PPPoE: 2B PPP + 6B PPPoE +
+.br
+ ETHERNET: 6B dest MAC + 6B src MAC + 2B ethertype + 4B Frame Check Sequence +
+.br
+ PTM: 1B Start of Frame (S) + 1B End of Frame (Ck) + 2B TC-CRC (PTM-FCS)
+.br
+.PP
+.B bridged-ptm
+.br
+ Equivalent to
+.B overhead 22 ptm
+.br
+ ETHERNET: 6B dest MAC + 6B src MAC + 2B ethertype + 4B Frame Check Sequence +
+.br
+ PTM: 1B Start of Frame (S) + 1B End of Frame (Ck) + 2B TC-CRC (PTM-FCS)
+.br
+.PP
+See also the Ethernet Correction Factors section below.
+
+.SS DOCSIS Cable Overhead Keyword
+DOCSIS is the universal standard for providing Internet service over cable-TV
+infrastructure.
+
+In this case, the actual on-wire overhead is less important than the packet size
+the head-end equipment uses for shaping and metering. This is specified to be
+an Ethernet frame including the CRC (aka FCS).
+.PP
+.B docsis
+.br
+ Equivalent to
+.B overhead 18 mpu 64 noatm
+
+.SS Ethernet Overhead Keywords
+.PP
+.B ethernet
+.br
+ Accounts for Ethernet's preamble, inter-frame gap, and Frame Check
+Sequence. Use this keyword when the bottleneck being shaped for is an
+actual Ethernet cable.
+.br
+ Equivalent to
+.B overhead 38 mpu 84 noatm
+.PP
+.B ether-vlan
+.br
+ Adds 4 bytes to the overhead compensation, accounting for an IEEE 802.1Q
+VLAN header appended to the Ethernet frame header. NB: Some ISPs use one or
+even two of these within PPPoE; this keyword may be repeated as necessary to
+express this.
+
+.SH ROUND TRIP TIME PARAMETERS
+Active Queue Management (AQM) consists of embedding congestion signals in the
+packet flow, which receivers use to instruct senders to slow down when the queue
+is persistently occupied. CAKE uses ECN signalling when available, and packet
+drops otherwise, according to a combination of the Codel and BLUE AQM algorithms
+called COBALT.
+
+Very short latencies require a very rapid AQM response to adequately control
+latency. However, such a rapid response tends to impair throughput when the
+actual RTT is relatively long. CAKE allows specifying the RTT it assumes for
+tuning various parameters. Actual RTTs within an order of magnitude of this
+will generally work well for both throughput and latency management.
+
+At the 'lan' setting and below, the time constants are similar in magnitude to
+the jitter in the Linux kernel itself, so congestion might be signalled
+prematurely. The flows will then become sparse and total throughput reduced,
+leaving little or no back-pressure for the fairness logic to work against. Use
+the "metro" setting for local lans unless you have a custom kernel.
+.PP
+.B rtt
+TIME
+.br
+ Manually specify an RTT.
+.PP
+.B datacentre
+.br
+ For extremely high-performance 10GigE+ networks only. Equivalent to
+.B rtt 100us.
+.PP
+.B lan
+.br
+ For pure Ethernet (not Wi-Fi) networks, at home or in the office. Don't
+use this when shaping for an Internet access link. Equivalent to
+.B rtt 1ms.
+.PP
+.B metro
+.br
+ For traffic mostly within a single city. Equivalent to
+.B rtt 10ms.
+.PP
+.B regional
+.br
+ For traffic mostly within a European-sized country. Equivalent to
+.B rtt 30ms.
+.PP
+.B internet
+(default)
+.br
+ This is suitable for most Internet traffic. Equivalent to
+.B rtt 100ms.
+.PP
+.B oceanic
+.br
+ For Internet traffic with generally above-average latency, such as that
+suffered by Australasian residents. Equivalent to
+.B rtt 300ms.
+.PP
+.B satellite
+.br
+ For traffic via geostationary satellites. Equivalent to
+.B rtt 1000ms.
+.PP
+.B interplanetary
+.br
+ So named because Jupiter is about 1 light-hour from Earth. Use this to
+(almost) completely disable AQM actions. Equivalent to
+.B rtt 3600s.
+
+.SH FLOW ISOLATION PARAMETERS
+With flow isolation enabled, CAKE places packets from different flows into
+different queues, each of which carries its own AQM state. Packets from each
+queue are then delivered fairly, according to a DRR++ algorithm which minimises
+latency for "sparse" flows. CAKE uses a set-associative hashing algorithm to
+minimise flow collisions.
+
+These keywords specify whether fairness based on source address, destination
+address, individual flows, or any combination of those is desired.
+.PP
+.B flowblind
+.br
+ Disables flow isolation; all traffic passes through a single queue for
+each tin.
+.PP
+.B srchost
+.br
+ Flows are defined only by source address. Could be useful on the egress
+path of an ISP backhaul.
+.PP
+.B dsthost
+.br
+ Flows are defined only by destination address. Could be useful on the
+ingress path of an ISP backhaul.
+.PP
+.B hosts
+.br
+ Flows are defined by source-destination host pairs. This is host
+isolation, rather than flow isolation.
+.PP
+.B flows
+.br
+ Flows are defined by the entire 5-tuple of source address, destination
+address, transport protocol, source port and destination port. This is the type
+of flow isolation performed by SFQ and fq_codel.
+.PP
+.B dual-srchost
+.br
+ Flows are defined by the 5-tuple, and fairness is applied first over
+source addresses, then over individual flows. Good for use on egress traffic
+from a LAN to the internet, where it'll prevent any one LAN host from
+monopolising the uplink, regardless of the number of flows they use.
+.PP
+.B dual-dsthost
+.br
+ Flows are defined by the 5-tuple, and fairness is applied first over
+destination addresses, then over individual flows. Good for use on ingress
+traffic to a LAN from the internet, where it'll prevent any one LAN host from
+monopolising the downlink, regardless of the number of flows they use.
+.PP
+.B triple-isolate
+(default)
+.br
+ Flows are defined by the 5-tuple, and fairness is applied over source
+*and* destination addresses intelligently (ie. not merely by host-pairs), and
+also over individual flows. Use this if you're not certain whether to use
+dual-srchost or dual-dsthost; it'll do both jobs at once, preventing any one
+host on *either* side of the link from monopolising it with a large number of
+flows.
+.PP
+.B nat
+.br
+ Instructs Cake to perform a NAT lookup before applying flow-isolation
+rules, to determine the true addresses and port numbers of the packet, to
+improve fairness between hosts "inside" the NAT. This has no practical effect
+in "flowblind" or "flows" modes, or if NAT is performed on a different host.
+.PP
+.B nonat
+(default)
+.br
+ Cake will not perform a NAT lookup. Flow isolation will be performed
+using the addresses and port numbers directly visible to the interface Cake is
+attached to.
+
+.SH PRIORITY QUEUE PARAMETERS
+CAKE can divide traffic into "tins" based on the Diffserv field. Each tin has
+its own independent set of flow-isolation queues, and is serviced based on a WRR
+algorithm. To avoid perverse Diffserv marking incentives, tin weights have a
+"priority sharing" value when bandwidth used by that tin is below a threshold,
+and a lower "bandwidth sharing" value when above. Bandwidth is compared against
+the threshold using the same algorithm as the deficit-mode shaper.
+
+Detailed customisation of tin parameters is not provided. The following presets
+perform all necessary tuning, relative to the current shaper bandwidth and RTT
+settings.
+.PP
+.B besteffort
+.br
+ Disables priority queuing by placing all traffic in one tin.
+.PP
+.B precedence
+.br
+ Enables legacy interpretation of TOS "Precedence" field. Use of this
+preset on the modern Internet is firmly discouraged.
+.PP
+.B diffserv4
+.br
+ Provides a general-purpose Diffserv implementation with four tins:
+.br
+ Bulk (CS1), 6.25% threshold, generally low priority.
+.br
+ Best Effort (general), 100% threshold.
+.br
+ Video (AF4x, AF3x, CS3, AF2x, CS2, TOS4, TOS1), 50% threshold.
+.br
+ Voice (CS7, CS6, EF, VA, CS5, CS4), 25% threshold.
+.PP
+.B diffserv3
+(default)
+.br
+ Provides a simple, general-purpose Diffserv implementation with three tins:
+.br
+ Bulk (CS1), 6.25% threshold, generally low priority.
+.br
+ Best Effort (general), 100% threshold.
+.br
+ Voice (CS7, CS6, EF, VA, TOS4), 25% threshold, reduced Codel interval.
+
+.SH OTHER PARAMETERS
+.B memlimit
+LIMIT
+.br
+ Limit the memory consumed by Cake to LIMIT bytes. Note that this does
+not translate directly to queue size (so do not size this based on bandwidth
+delay product considerations, but rather on worst case acceptable memory
+consumption), as there is some overhead in the data structures containing the
+packets, especially for small packets.
+
+ By default, the limit is calculated based on the bandwidth and RTT
+settings.
+
+.PP
+.B wash
+
+.br
+ Traffic entering your diffserv domain is frequently mis-marked in
+transit from the perspective of your network, and traffic exiting yours may be
+mis-marked from the perspective of the transiting provider.
+
+Apply the wash option to clear all extra diffserv (but not ECN bits), after
+priority queuing has taken place.
+
+If you are shaping inbound, and cannot trust the diffserv markings (as is the
+case for Comcast Cable, among others), it is best to use a single queue
+"besteffort" mode with wash.
+
+.SH EXAMPLES
+# tc qdisc delete root dev eth0
+.br
+# tc qdisc add root dev eth0 cake bandwidth 100Mbit ethernet
+.br
+# tc -s qdisc show dev eth0
+.br
+qdisc cake 1: root refcnt 2 bandwidth 100Mbit diffserv3 triple-isolate rtt 100.0ms noatm overhead 38 mpu 84
+ Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
+ backlog 0b 0p requeues 0
+ memory used: 0b of 5000000b
+ capacity estimate: 100Mbit
+ min/max network layer size: 65535 / 0
+ min/max overhead-adjusted size: 65535 / 0
+ average network hdr offset: 0
+
+ Bulk Best Effort Voice
+ thresh 6250Kbit 100Mbit 25Mbit
+ target 5.0ms 5.0ms 5.0ms
+ interval 100.0ms 100.0ms 100.0ms
+ pk_delay 0us 0us 0us
+ av_delay 0us 0us 0us
+ sp_delay 0us 0us 0us
+ pkts 0 0 0
+ bytes 0 0 0
+ way_inds 0 0 0
+ way_miss 0 0 0
+ way_cols 0 0 0
+ drops 0 0 0
+ marks 0 0 0
+ ack_drop 0 0 0
+ sp_flows 0 0 0
+ bk_flows 0 0 0
+ un_flows 0 0 0
+ max_len 0 0 0
+ quantum 300 1514 762
+
+After some use:
+.br
+# tc -s qdisc show dev eth0
+
+qdisc cake 1: root refcnt 2 bandwidth 100Mbit diffserv3 triple-isolate rtt 100.0ms noatm overhead 38 mpu 84
+ Sent 44709231 bytes 31931 pkt (dropped 45, overlimits 93782 requeues 0)
+ backlog 33308b 22p requeues 0
+ memory used: 292352b of 5000000b
+ capacity estimate: 100Mbit
+ min/max network layer size: 28 / 1500
+ min/max overhead-adjusted size: 84 / 1538
+ average network hdr offset: 14
+
+ Bulk Best Effort Voice
+ thresh 6250Kbit 100Mbit 25Mbit
+ target 5.0ms 5.0ms 5.0ms
+ interval 100.0ms 100.0ms 100.0ms
+ pk_delay 8.7ms 6.9ms 5.0ms
+ av_delay 4.9ms 5.3ms 3.8ms
+ sp_delay 727us 1.4ms 511us
+ pkts 2590 21271 8137
+ bytes 3081804 30302659 11426206
+ way_inds 0 46 0
+ way_miss 3 17 4
+ way_cols 0 0 0
+ drops 20 15 10
+ marks 0 0 0
+ ack_drop 0 0 0
+ sp_flows 2 4 1
+ bk_flows 1 2 1
+ un_flows 0 0 0
+ max_len 1514 1514 1514
+ quantum 300 1514 762
+
+.SH SEE ALSO
+.BR tc (8),
+.BR tc-codel (8),
+.BR tc-fq_codel (8),
+.BR tc-htb (8)
+
+.SH AUTHORS
+Cake's principal author is Jonathan Morton, with contributions from
+Tony Ambardar, Kevin Darbyshire-Bryant, Toke Høiland-Jørgensen,
+Sebastian Moeller, Ryan Mounce, Dean Scarff, Nils Andreas Svee, and Dave Täht.
+
+This manual page was written by Loganaden Velvindron. Please report corrections
+to the Linux Networking mailing list <netdev@vger.kernel.org>.
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+
+/*
+ * Common Applications Kept Enhanced -- CAKE
+ *
+ * Copyright (C) 2014-2018 Jonathan Morton <chromatix99@gmail.com>
+ * Copyright (C) 2017-2018 Toke Høiland-Jørgensen <toke@toke.dk>
+ */
+
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <syslog.h>
+#include <fcntl.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <string.h>
+#include <inttypes.h>
+
+#include "utils.h"
+#include "tc_util.h"
+
+struct cake_preset {
+ char *name;
+ unsigned int target;
+ unsigned int interval;
+};
+
+static struct cake_preset presets[] = {
+ {"datacentre", 5, 100},
+ {"lan", 50, 1000},
+ {"metro", 500, 10000},
+ {"regional", 1500, 30000},
+ {"internet", 5000, 100000},
+ {"oceanic", 15000, 300000},
+ {"satellite", 50000, 1000000},
+ {"interplanetary", 50000000, 1000000000},
+};
+
+static const char * diffserv_names[CAKE_DIFFSERV_MAX] = {
+ [CAKE_DIFFSERV_DIFFSERV3] = "diffserv3",
+ [CAKE_DIFFSERV_DIFFSERV4] = "diffserv4",
+ [CAKE_DIFFSERV_DIFFSERV8] = "diffserv8",
+ [CAKE_DIFFSERV_BESTEFFORT] = "besteffort",
+ [CAKE_DIFFSERV_PRECEDENCE] = "precedence",
+};
+
+static const char * flowmode_names[CAKE_FLOW_MAX] = {
+ [CAKE_FLOW_NONE] = "flowblind",
+ [CAKE_FLOW_SRC_IP] = "srchost",
+ [CAKE_FLOW_DST_IP] = "dsthost",
+ [CAKE_FLOW_HOSTS] = "hosts",
+ [CAKE_FLOW_FLOWS] = "flows",
+ [CAKE_FLOW_DUAL_SRC] = "dual-srchost",
+ [CAKE_FLOW_DUAL_DST] = "dual-dsthost",
+ [CAKE_FLOW_TRIPLE] = "triple-isolate",
+};
+
+static struct cake_preset *find_preset(char *argv)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(presets); i++)
+ if (!strcmp(argv, presets[i].name))
+ return &presets[i];
+ return NULL;
+}
+
+static void explain(void)
+{
+ fprintf(stderr,
+"Usage: ... cake [ bandwidth RATE | unlimited* | autorate_ingress ]\n"
+" [ rtt TIME | datacentre | lan | metro | regional |\n"
+" internet* | oceanic | satellite | interplanetary ]\n"
+" [ besteffort | diffserv8 | diffserv4 | diffserv3* ]\n"
+" [ flowblind | srchost | dsthost | hosts | flows |\n"
+" dual-srchost | dual-dsthost | triple-isolate* ]\n"
+" [ nat | nonat* ]\n"
+" [ wash | nowash* ]\n"
+" [ ack-filter | ack-filter-aggressive | no-ack-filter* ]\n"
+" [ memlimit LIMIT ]\n"
+" [ ptm | atm | noatm* ] [ overhead N | conservative | raw* ]\n"
+" [ mpu N ] [ ingress | egress* ]\n"
+" (* marks defaults)\n");
+}
+
+static int cake_parse_opt(struct qdisc_util *qu, int argc, char **argv,
+ struct nlmsghdr *n, const char *dev)
+{
+ struct cake_preset *preset, *preset_set = NULL;
+ bool overhead_override = false;
+ bool overhead_set = false;
+ unsigned int interval = 0;
+ unsigned int diffserv = 0;
+ unsigned int memlimit = 0;
+ unsigned int target = 0;
+ __u64 bandwidth = 0;
+ int ack_filter = -1;
+ struct rtattr *tail;
+ int unlimited = 0;
+ int flowmode = -1;
+ int autorate = -1;
+ int ingress = -1;
+ int overhead = 0;
+ int wash = -1;
+ int nat = -1;
+ int atm = -1;
+ int mpu = 0;
+
+ while (argc > 0) {
+ if (strcmp(*argv, "bandwidth") == 0) {
+ NEXT_ARG();
+ if (get_rate64(&bandwidth, *argv)) {
+ fprintf(stderr, "Illegal \"bandwidth\"\n");
+ return -1;
+ }
+ unlimited = 0;
+ autorate = 0;
+ } else if (strcmp(*argv, "unlimited") == 0) {
+ bandwidth = 0;
+ unlimited = 1;
+ autorate = 0;
+ } else if (strcmp(*argv, "autorate_ingress") == 0) {
+ autorate = 1;
+ } else if (strcmp(*argv, "rtt") == 0) {
+ NEXT_ARG();
+ if (get_time(&interval, *argv)) {
+ fprintf(stderr, "Illegal \"rtt\"\n");
+ return -1;
+ }
+ target = interval / 20;
+ if (!target)
+ target = 1;
+ } else if ((preset = find_preset(*argv))) {
+ if (preset_set)
+ duparg(*argv, preset_set->name);
+ preset_set = preset;
+ target = preset->target;
+ interval = preset->interval;
+ } else if (strcmp(*argv, "besteffort") == 0) {
+ diffserv = CAKE_DIFFSERV_BESTEFFORT;
+ } else if (strcmp(*argv, "precedence") == 0) {
+ diffserv = CAKE_DIFFSERV_PRECEDENCE;
+ } else if (strcmp(*argv, "diffserv8") == 0) {
+ diffserv = CAKE_DIFFSERV_DIFFSERV8;
+ } else if (strcmp(*argv, "diffserv4") == 0) {
+ diffserv = CAKE_DIFFSERV_DIFFSERV4;
+ } else if (strcmp(*argv, "diffserv") == 0) {
+ diffserv = CAKE_DIFFSERV_DIFFSERV4;
+ } else if (strcmp(*argv, "diffserv3") == 0) {
+ diffserv = CAKE_DIFFSERV_DIFFSERV3;
+ } else if (strcmp(*argv, "nowash") == 0) {
+ wash = 0;
+ } else if (strcmp(*argv, "wash") == 0) {
+ wash = 1;
+ } else if (strcmp(*argv, "flowblind") == 0) {
+ flowmode = CAKE_FLOW_NONE;
+ } else if (strcmp(*argv, "srchost") == 0) {
+ flowmode = CAKE_FLOW_SRC_IP;
+ } else if (strcmp(*argv, "dsthost") == 0) {
+ flowmode = CAKE_FLOW_DST_IP;
+ } else if (strcmp(*argv, "hosts") == 0) {
+ flowmode = CAKE_FLOW_HOSTS;
+ } else if (strcmp(*argv, "flows") == 0) {
+ flowmode = CAKE_FLOW_FLOWS;
+ } else if (strcmp(*argv, "dual-srchost") == 0) {
+ flowmode = CAKE_FLOW_DUAL_SRC;
+ } else if (strcmp(*argv, "dual-dsthost") == 0) {
+ flowmode = CAKE_FLOW_DUAL_DST;
+ } else if (strcmp(*argv, "triple-isolate") == 0) {
+ flowmode = CAKE_FLOW_TRIPLE;
+ } else if (strcmp(*argv, "nat") == 0) {
+ nat = 1;
+ } else if (strcmp(*argv, "nonat") == 0) {
+ nat = 0;
+ } else if (strcmp(*argv, "ptm") == 0) {
+ atm = CAKE_ATM_PTM;
+ } else if (strcmp(*argv, "atm") == 0) {
+ atm = CAKE_ATM_ATM;
+ } else if (strcmp(*argv, "noatm") == 0) {
+ atm = CAKE_ATM_NONE;
+ } else if (strcmp(*argv, "raw") == 0) {
+ atm = CAKE_ATM_NONE;
+ overhead = 0;
+ overhead_set = true;
+ overhead_override = true;
+ } else if (strcmp(*argv, "conservative") == 0) {
+ /*
+ * Deliberately over-estimate overhead:
+ * one whole ATM cell plus ATM framing.
+ * A safe choice if the actual overhead is unknown.
+ */
+ atm = CAKE_ATM_ATM;
+ overhead = 48;
+ overhead_set = true;
+
+ /* Various ADSL framing schemes, all over ATM cells */
+ } else if (strcmp(*argv, "ipoa-vcmux") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 8;
+ overhead_set = true;
+ } else if (strcmp(*argv, "ipoa-llcsnap") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 16;
+ overhead_set = true;
+ } else if (strcmp(*argv, "bridged-vcmux") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 24;
+ overhead_set = true;
+ } else if (strcmp(*argv, "bridged-llcsnap") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 32;
+ overhead_set = true;
+ } else if (strcmp(*argv, "pppoa-vcmux") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 10;
+ overhead_set = true;
+ } else if (strcmp(*argv, "pppoa-llc") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 14;
+ overhead_set = true;
+ } else if (strcmp(*argv, "pppoe-vcmux") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 32;
+ overhead_set = true;
+ } else if (strcmp(*argv, "pppoe-llcsnap") == 0) {
+ atm = CAKE_ATM_ATM;
+ overhead += 40;
+ overhead_set = true;
+
+ /* Typical VDSL2 framing schemes, both over PTM */
+ /* PTM has 64b/65b coding which absorbs some bandwidth */
+ } else if (strcmp(*argv, "pppoe-ptm") == 0) {
+ /* 2B PPP + 6B PPPoE + 6B dest MAC + 6B src MAC
+ * + 2B ethertype + 4B Frame Check Sequence
+ * + 1B Start of Frame (S) + 1B End of Frame (Ck)
+ * + 2B TC-CRC (PTM-FCS) = 30B
+ */
+ atm = CAKE_ATM_PTM;
+ overhead += 30;
+ overhead_set = true;
+ } else if (strcmp(*argv, "bridged-ptm") == 0) {
+ /* 6B dest MAC + 6B src MAC + 2B ethertype
+ * + 4B Frame Check Sequence
+ * + 1B Start of Frame (S) + 1B End of Frame (Ck)
+ * + 2B TC-CRC (PTM-FCS) = 22B
+ */
+ atm = CAKE_ATM_PTM;
+ overhead += 22;
+ overhead_set = true;
+ } else if (strcmp(*argv, "via-ethernet") == 0) {
+ /*
+ * We used to use this flag to manually compensate for
+ * Linux including the Ethernet header on Ethernet-type
+ * interfaces, but not on IP-type interfaces.
+ *
+ * It is no longer needed, because Cake now adjusts for
+ * that automatically, and is thus ignored.
+ *
+ * It would be deleted entirely, but it appears in the
+ * stats output when the automatic compensation is
+ * active.
+ */
+ } else if (strcmp(*argv, "ethernet") == 0) {
+ /* ethernet pre-amble & interframe gap & FCS
+ * you may need to add vlan tag
+ */
+ overhead += 38;
+ overhead_set = true;
+ mpu = 84;
+
+ /* Additional Ethernet-related overhead used by some ISPs */
+ } else if (strcmp(*argv, "ether-vlan") == 0) {
+ /* 802.1q VLAN tag - may be repeated */
+ overhead += 4;
+ overhead_set = true;
+
+ /*
+ * DOCSIS cable shapers account for Ethernet frame with FCS,
+ * but not interframe gap or preamble.
+ */
+ } else if (strcmp(*argv, "docsis") == 0) {
+ atm = CAKE_ATM_NONE;
+ overhead += 18;
+ overhead_set = true;
+ mpu = 64;
+ } else if (strcmp(*argv, "overhead") == 0) {
+ char *p = NULL;
+
+ NEXT_ARG();
+ overhead = strtol(*argv, &p, 10);
+ if (!p || *p || !*argv ||
+ overhead < -64 || overhead > 256) {
+ fprintf(stderr,
+ "Illegal \"overhead\", valid range is -64 to 256\\n");
+ return -1;
+ }
+ overhead_set = true;
+
+ } else if (strcmp(*argv, "mpu") == 0) {
+ char *p = NULL;
+
+ NEXT_ARG();
+ mpu = strtol(*argv, &p, 10);
+ if (!p || *p || !*argv || mpu < 0 || mpu > 256) {
+ fprintf(stderr,
+ "Illegal \"mpu\", valid range is 0 to 256\\n");
+ return -1;
+ }
+ } else if (strcmp(*argv, "ingress") == 0) {
+ ingress = 1;
+ } else if (strcmp(*argv, "egress") == 0) {
+ ingress = 0;
+ } else if (strcmp(*argv, "no-ack-filter") == 0) {
+ ack_filter = CAKE_ACK_NONE;
+ } else if (strcmp(*argv, "ack-filter") == 0) {
+ ack_filter = CAKE_ACK_FILTER;
+ } else if (strcmp(*argv, "ack-filter-aggressive") == 0) {
+ ack_filter = CAKE_ACK_AGGRESSIVE;
+ } else if (strcmp(*argv, "memlimit") == 0) {
+ NEXT_ARG();
+ if (get_size(&memlimit, *argv)) {
+ fprintf(stderr,
+ "Illegal value for \"memlimit\": \"%s\"\n", *argv);
+ return -1;
+ }
+ } else if (strcmp(*argv, "help") == 0) {
+ explain();
+ return -1;
+ } else {
+ fprintf(stderr, "What is \"%s\"?\n", *argv);
+ explain();
+ return -1;
+ }
+ argc--; argv++;
+ }
+
+ tail = NLMSG_TAIL(n);
+ addattr_l(n, 1024, TCA_OPTIONS, NULL, 0);
+ if (bandwidth || unlimited)
+ addattr_l(n, 1024, TCA_CAKE_BASE_RATE64, &bandwidth,
+ sizeof(bandwidth));
+ if (diffserv)
+ addattr_l(n, 1024, TCA_CAKE_DIFFSERV_MODE, &diffserv,
+ sizeof(diffserv));
+ if (atm != -1)
+ addattr_l(n, 1024, TCA_CAKE_ATM, &atm, sizeof(atm));
+ if (flowmode != -1)
+ addattr_l(n, 1024, TCA_CAKE_FLOW_MODE, &flowmode,
+ sizeof(flowmode));
+ if (overhead_set)
+ addattr_l(n, 1024, TCA_CAKE_OVERHEAD, &overhead,
+ sizeof(overhead));
+ if (overhead_override) {
+ unsigned int zero = 0;
+
+ addattr_l(n, 1024, TCA_CAKE_RAW, &zero, sizeof(zero));
+ }
+ if (mpu > 0)
+ addattr_l(n, 1024, TCA_CAKE_MPU, &mpu, sizeof(mpu));
+ if (interval)
+ addattr_l(n, 1024, TCA_CAKE_RTT, &interval, sizeof(interval));
+ if (target)
+ addattr_l(n, 1024, TCA_CAKE_TARGET, &target, sizeof(target));
+ if (autorate != -1)
+ addattr_l(n, 1024, TCA_CAKE_AUTORATE, &autorate,
+ sizeof(autorate));
+ if (memlimit)
+ addattr_l(n, 1024, TCA_CAKE_MEMORY, &memlimit,
+ sizeof(memlimit));
+ if (nat != -1)
+ addattr_l(n, 1024, TCA_CAKE_NAT, &nat, sizeof(nat));
+ if (wash != -1)
+ addattr_l(n, 1024, TCA_CAKE_WASH, &wash, sizeof(wash));
+ if (ingress != -1)
+ addattr_l(n, 1024, TCA_CAKE_INGRESS, &ingress, sizeof(ingress));
+ if (ack_filter != -1)
+ addattr_l(n, 1024, TCA_CAKE_ACK_FILTER, &ack_filter,
+ sizeof(ack_filter));
+
+ tail->rta_len = (void *) NLMSG_TAIL(n) - (void *) tail;
+ return 0;
+}
+
+static void cake_print_mode(unsigned int value, unsigned int max,
+ const char *key, const char **table)
+{
+ if (value < max && table[value]) {
+ print_string(PRINT_ANY, key, "%s ", table[value]);
+ } else {
+ print_string(PRINT_JSON, key, NULL, "unknown");
+ print_string(PRINT_FP, NULL, "(?%s?)", key);
+ }
+}
+
+static int cake_print_opt(struct qdisc_util *qu, FILE *f, struct rtattr *opt)
+{
+ struct rtattr *tb[TCA_CAKE_MAX + 1];
+ unsigned int interval = 0;
+ unsigned int memlimit = 0;
+ __u64 bandwidth = 0;
+ int ack_filter = 0;
+ int split_gso = 0;
+ int overhead = 0;
+ int autorate = 0;
+ int ingress = 0;
+ int wash = 0;
+ int raw = 0;
+ int mpu = 0;
+ int atm = 0;
+ int nat = 0;
+
+ SPRINT_BUF(b1);
+ SPRINT_BUF(b2);
+
+ if (opt == NULL)
+ return 0;
+
+ parse_rtattr_nested(tb, TCA_CAKE_MAX, opt);
+
+ if (tb[TCA_CAKE_BASE_RATE64] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_BASE_RATE64]) >= sizeof(bandwidth)) {
+ bandwidth = rta_getattr_u64(tb[TCA_CAKE_BASE_RATE64]);
+ if (bandwidth) {
+ print_uint(PRINT_JSON, "bandwidth", NULL, bandwidth);
+ print_string(PRINT_FP, NULL, "bandwidth %s ",
+ sprint_rate(bandwidth, b1));
+ } else
+ print_string(PRINT_ANY, "bandwidth", "bandwidth %s ",
+ "unlimited");
+ }
+ if (tb[TCA_CAKE_AUTORATE] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_AUTORATE]) >= sizeof(__u32)) {
+ autorate = rta_getattr_u32(tb[TCA_CAKE_AUTORATE]);
+ if (autorate == 1)
+ print_string(PRINT_ANY, "autorate", "autorate_%s ",
+ "ingress");
+ else if (autorate)
+ print_string(PRINT_ANY, "autorate", "(?autorate?) ",
+ "unknown");
+ }
+ if (tb[TCA_CAKE_DIFFSERV_MODE] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_DIFFSERV_MODE]) >= sizeof(__u32)) {
+ cake_print_mode(rta_getattr_u32(tb[TCA_CAKE_DIFFSERV_MODE]),
+ CAKE_DIFFSERV_MAX, "diffserv", diffserv_names);
+ }
+ if (tb[TCA_CAKE_FLOW_MODE] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_FLOW_MODE]) >= sizeof(__u32)) {
+ cake_print_mode(rta_getattr_u32(tb[TCA_CAKE_FLOW_MODE]),
+ CAKE_FLOW_MAX, "flowmode", flowmode_names);
+ }
+
+ if (tb[TCA_CAKE_NAT] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_NAT]) >= sizeof(__u32)) {
+ nat = rta_getattr_u32(tb[TCA_CAKE_NAT]);
+ }
+
+ if (nat)
+ print_string(PRINT_FP, NULL, "nat ", NULL);
+ print_bool(PRINT_JSON, "nat", NULL, nat);
+
+ if (tb[TCA_CAKE_WASH] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_WASH]) >= sizeof(__u32)) {
+ wash = rta_getattr_u32(tb[TCA_CAKE_WASH]);
+ }
+ if (tb[TCA_CAKE_ATM] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_ATM]) >= sizeof(__u32)) {
+ atm = rta_getattr_u32(tb[TCA_CAKE_ATM]);
+ }
+ if (tb[TCA_CAKE_OVERHEAD] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_OVERHEAD]) >= sizeof(__s32)) {
+ overhead = *(__s32 *) RTA_DATA(tb[TCA_CAKE_OVERHEAD]);
+ }
+ if (tb[TCA_CAKE_MPU] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_MPU]) >= sizeof(__u32)) {
+ mpu = rta_getattr_u32(tb[TCA_CAKE_MPU]);
+ }
+ if (tb[TCA_CAKE_INGRESS] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_INGRESS]) >= sizeof(__u32)) {
+ ingress = rta_getattr_u32(tb[TCA_CAKE_INGRESS]);
+ }
+ if (tb[TCA_CAKE_ACK_FILTER] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_ACK_FILTER]) >= sizeof(__u32)) {
+ ack_filter = rta_getattr_u32(tb[TCA_CAKE_ACK_FILTER]);
+ }
+ if (tb[TCA_CAKE_SPLIT_GSO] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_SPLIT_GSO]) >= sizeof(__u32)) {
+ split_gso = rta_getattr_u32(tb[TCA_CAKE_SPLIT_GSO]);
+ }
+ if (tb[TCA_CAKE_RAW]) {
+ raw = 1;
+ }
+ if (tb[TCA_CAKE_RTT] &&
+ RTA_PAYLOAD(tb[TCA_CAKE_RTT]) >= sizeof(__u32)) {
+ interval = rta_getattr_u32(tb[TCA_CAKE_RTT]);
+ }
+
+ if (wash)
+ print_string(PRINT_FP, NULL, "wash ", NULL);
+ print_bool(PRINT_JSON, "wash", NULL, wash);
+
+ if (ingress)
+ print_string(PRINT_FP, NULL, "ingress ", NULL);
+ print_bool(PRINT_JSON, "ingress", NULL, ingress);
+
+ if (ack_filter == CAKE_ACK_AGGRESSIVE)
+ print_string(PRINT_ANY, "ack-filter", "ack-filter-%s ",
+ "aggressive");
+ else if (ack_filter == CAKE_ACK_FILTER)
+ print_string(PRINT_ANY, "ack-filter", "ack-filter ", "enabled");
+ else
+ print_string(PRINT_JSON, "ack-filter", NULL, "disabled");
+
+ if (split_gso)
+ print_string(PRINT_FP, NULL, "split-gso ", NULL);
+ print_bool(PRINT_JSON, "split_gso", NULL, split_gso);
+
+ if (interval)
+ print_string(PRINT_FP, NULL, "rtt %s ",
+ sprint_time(interval, b2));
+ print_uint(PRINT_JSON, "rtt", NULL, interval);
+
+ if (raw)
+ print_string(PRINT_FP, NULL, "raw ", NULL);
+ print_bool(PRINT_JSON, "raw", NULL, raw);
+
+ if (atm == CAKE_ATM_ATM)
+ print_string(PRINT_ANY, "atm", "%s ", "atm");
+ else if (atm == CAKE_ATM_PTM)
+ print_string(PRINT_ANY, "atm", "%s ", "ptm");
+ else if (!raw)
+ print_string(PRINT_ANY, "atm", "%s ", "noatm");
+
+ print_int(PRINT_ANY, "overhead", "overhead %d ", overhead);
+
+ if (mpu)
+ print_uint(PRINT_ANY, "mpu", "mpu %u ", mpu);
+
+ if (memlimit) {
+ print_uint(PRINT_JSON, "memlimit", NULL, memlimit);
+ print_string(PRINT_FP, NULL, "memlimit %s",
+ sprint_size(memlimit, b1));
+ }
+
+ return 0;
+}
+
+static void cake_print_json_tin(struct rtattr **tstat)
+{
+#define PRINT_TSTAT_JSON(type, name, attr) if (tstat[TCA_CAKE_TIN_STATS_ ## attr]) \
+ print_u64(PRINT_JSON, name, NULL, \
+ rta_getattr_ ## type((struct rtattr *) \
+ tstat[TCA_CAKE_TIN_STATS_ ## attr]))
+
+ open_json_object(NULL);
+ PRINT_TSTAT_JSON(u64, "threshold_rate", THRESHOLD_RATE64);
+ PRINT_TSTAT_JSON(u64, "sent_bytes", SENT_BYTES64);
+ PRINT_TSTAT_JSON(u32, "backlog_bytes", BACKLOG_BYTES);
+ PRINT_TSTAT_JSON(u32, "target_us", TARGET_US);
+ PRINT_TSTAT_JSON(u32, "interval_us", INTERVAL_US);
+ PRINT_TSTAT_JSON(u32, "peak_delay_us", PEAK_DELAY_US);
+ PRINT_TSTAT_JSON(u32, "avg_delay_us", AVG_DELAY_US);
+ PRINT_TSTAT_JSON(u32, "base_delay_us", BASE_DELAY_US);
+ PRINT_TSTAT_JSON(u32, "sent_packets", SENT_PACKETS);
+ PRINT_TSTAT_JSON(u32, "way_indirect_hits", WAY_INDIRECT_HITS);
+ PRINT_TSTAT_JSON(u32, "way_misses", WAY_MISSES);
+ PRINT_TSTAT_JSON(u32, "way_collisions", WAY_COLLISIONS);
+ PRINT_TSTAT_JSON(u32, "drops", DROPPED_PACKETS);
+ PRINT_TSTAT_JSON(u32, "ecn_mark", ECN_MARKED_PACKETS);
+ PRINT_TSTAT_JSON(u32, "ack_drops", ACKS_DROPPED_PACKETS);
+ PRINT_TSTAT_JSON(u32, "sparse_flows", SPARSE_FLOWS);
+ PRINT_TSTAT_JSON(u32, "bulk_flows", BULK_FLOWS);
+ PRINT_TSTAT_JSON(u32, "unresponsive_flows", UNRESPONSIVE_FLOWS);
+ PRINT_TSTAT_JSON(u32, "max_pkt_len", MAX_SKBLEN);
+ PRINT_TSTAT_JSON(u32, "flow_quantum", FLOW_QUANTUM);
+ close_json_object();
+
+#undef PRINT_TSTAT_JSON
+}
+
+static int cake_print_xstats(struct qdisc_util *qu, FILE *f,
+ struct rtattr *xstats)
+{
+ struct rtattr *st[TCA_CAKE_STATS_MAX + 1];
+ SPRINT_BUF(b1);
+ int i;
+
+ if (xstats == NULL)
+ return 0;
+
+#define GET_STAT_U32(attr) rta_getattr_u32(st[TCA_CAKE_STATS_ ## attr])
+#define GET_STAT_S32(attr) (*(__s32 *)RTA_DATA(st[TCA_CAKE_STATS_ ## attr]))
+#define GET_STAT_U64(attr) rta_getattr_u64(st[TCA_CAKE_STATS_ ## attr])
+
+ parse_rtattr_nested(st, TCA_CAKE_STATS_MAX, xstats);
+
+ if (st[TCA_CAKE_STATS_MEMORY_USED] &&
+ st[TCA_CAKE_STATS_MEMORY_LIMIT]) {
+ print_string(PRINT_FP, NULL, " memory used: %s",
+ sprint_size(GET_STAT_U32(MEMORY_USED), b1));
+
+ print_string(PRINT_FP, NULL, " of %s\n",
+ sprint_size(GET_STAT_U32(MEMORY_LIMIT), b1));
+
+ print_uint(PRINT_JSON, "memory_used", NULL,
+ GET_STAT_U32(MEMORY_USED));
+ print_uint(PRINT_JSON, "memory_limit", NULL,
+ GET_STAT_U32(MEMORY_LIMIT));
+ }
+
+ if (st[TCA_CAKE_STATS_CAPACITY_ESTIMATE64]) {
+ print_string(PRINT_FP, NULL, " capacity estimate: %s\n",
+ sprint_rate(GET_STAT_U64(CAPACITY_ESTIMATE64), b1));
+ print_uint(PRINT_JSON, "capacity_estimate", NULL,
+ GET_STAT_U64(CAPACITY_ESTIMATE64));
+ }
+
+ if (st[TCA_CAKE_STATS_MIN_NETLEN] &&
+ st[TCA_CAKE_STATS_MAX_NETLEN]) {
+ print_uint(PRINT_ANY, "min_network_size",
+ " min/max network layer size: %12u",
+ GET_STAT_U32(MIN_NETLEN));
+ print_uint(PRINT_ANY, "max_network_size",
+ " /%8u\n", GET_STAT_U32(MAX_NETLEN));
+ }
+
+ if (st[TCA_CAKE_STATS_MIN_ADJLEN] &&
+ st[TCA_CAKE_STATS_MAX_ADJLEN]) {
+ print_uint(PRINT_ANY, "min_adj_size",
+ " min/max overhead-adjusted size: %8u",
+ GET_STAT_U32(MIN_ADJLEN));
+ print_uint(PRINT_ANY, "max_adj_size",
+ " /%8u\n", GET_STAT_U32(MAX_ADJLEN));
+ }
+
+ if (st[TCA_CAKE_STATS_AVG_NETOFF])
+ print_uint(PRINT_ANY, "avg_hdr_offset",
+ " average network hdr offset: %12u\n\n",
+ GET_STAT_U32(AVG_NETOFF));
+
+ /* class stats */
+ if (st[TCA_CAKE_STATS_DEFICIT])
+ print_int(PRINT_ANY, "deficit", " deficit %u",
+ GET_STAT_S32(DEFICIT));
+ if (st[TCA_CAKE_STATS_COBALT_COUNT])
+ print_uint(PRINT_ANY, "count", " count %u",
+ GET_STAT_U32(COBALT_COUNT));
+
+ if (st[TCA_CAKE_STATS_DROPPING] && GET_STAT_U32(DROPPING)) {
+ print_bool(PRINT_ANY, "dropping", " dropping", true);
+ if (st[TCA_CAKE_STATS_DROP_NEXT_US]) {
+ int drop_next = GET_STAT_S32(DROP_NEXT_US);
+
+ if (drop_next < 0) {
+ print_string(PRINT_FP, NULL, " drop_next -%s",
+ sprint_time(drop_next, b1));
+ } else {
+ print_uint(PRINT_JSON, "drop_next", NULL,
+ drop_next);
+ print_string(PRINT_FP, NULL, " drop_next %s",
+ sprint_time(drop_next, b1));
+ }
+ }
+ }
+
+ if (st[TCA_CAKE_STATS_P_DROP]) {
+ print_uint(PRINT_ANY, "blue_prob", " blue_prob %u",
+ GET_STAT_U32(P_DROP));
+ if (st[TCA_CAKE_STATS_BLUE_TIMER_US]) {
+ int blue_timer = GET_STAT_S32(BLUE_TIMER_US);
+
+ if (blue_timer < 0) {
+ print_string(PRINT_FP, NULL, " blue_timer -%s",
+ sprint_time(blue_timer, b1));
+ } else {
+ print_uint(PRINT_JSON, "blue_timer", NULL,
+ blue_timer);
+ print_string(PRINT_FP, NULL, " blue_timer %s",
+ sprint_time(blue_timer, b1));
+ }
+ }
+ }
+
+#undef GET_STAT_U32
+#undef GET_STAT_S32
+#undef GET_STAT_U64
+
+ if (st[TCA_CAKE_STATS_TIN_STATS]) {
+ struct rtattr *tstat[TC_CAKE_MAX_TINS][TCA_CAKE_TIN_STATS_MAX + 1];
+ struct rtattr *tins[TC_CAKE_MAX_TINS + 1];
+ int num_tins = 0;
+
+ parse_rtattr_nested(tins, TC_CAKE_MAX_TINS,
+ st[TCA_CAKE_STATS_TIN_STATS]);
+
+ for (i = 1; i <= TC_CAKE_MAX_TINS && tins[i]; i++) {
+ parse_rtattr_nested(tstat[i-1], TCA_CAKE_TIN_STATS_MAX,
+ tins[i]);
+ num_tins++;
+ }
+
+ if (!num_tins)
+ return 0;
+
+ if (is_json_context()) {
+ open_json_array(PRINT_JSON, "tins");
+ for (i = 0; i < num_tins; i++)
+ cake_print_json_tin(tstat[i]);
+ close_json_array(PRINT_JSON, NULL);
+
+ return 0;
+ }
+
+
+ switch (num_tins) {
+ case 3:
+ fprintf(f, " Bulk Best Effort Voice\n");
+ break;
+
+ case 4:
+ fprintf(f, " Bulk Best Effort Video Voice\n");
+ break;
+
+ default:
+ fprintf(f, " ");
+ for (i = 0; i < num_tins; i++)
+ fprintf(f, " Tin %u", i);
+ fprintf(f, "\n");
+ };
+
+#define GET_TSTAT(i, attr) (tstat[i][TCA_CAKE_TIN_STATS_ ## attr])
+#define PRINT_TSTAT(name, attr, fmts, val) do { \
+ if (GET_TSTAT(0, attr)) { \
+ fprintf(f, name); \
+ for (i = 0; i < num_tins; i++) \
+ fprintf(f, " %12" fmts, val); \
+ fprintf(f, "\n"); \
+ } \
+ } while (0)
+
+#define SPRINT_TSTAT(pfunc, type, name, attr) PRINT_TSTAT( \
+ name, attr, "s", sprint_ ## pfunc( \
+ rta_getattr_ ## type(GET_TSTAT(i, attr)), b1))
+
+#define PRINT_TSTAT_U32(name, attr) PRINT_TSTAT( \
+ name, attr, "u", rta_getattr_u32(GET_TSTAT(i, attr)))
+
+#define PRINT_TSTAT_U64(name, attr) PRINT_TSTAT( \
+ name, attr, "llu", rta_getattr_u64(GET_TSTAT(i, attr)))
+
+ SPRINT_TSTAT(rate, u64, " thresh ", THRESHOLD_RATE64);
+ SPRINT_TSTAT(time, u32, " target ", TARGET_US);
+ SPRINT_TSTAT(time, u32, " interval", INTERVAL_US);
+ SPRINT_TSTAT(time, u32, " pk_delay", PEAK_DELAY_US);
+ SPRINT_TSTAT(time, u32, " av_delay", AVG_DELAY_US);
+ SPRINT_TSTAT(time, u32, " sp_delay", BASE_DELAY_US);
+ SPRINT_TSTAT(size, u32, " backlog ", BACKLOG_BYTES);
+
+ PRINT_TSTAT_U32(" pkts ", SENT_PACKETS);
+ PRINT_TSTAT_U64(" bytes ", SENT_BYTES64);
+
+ PRINT_TSTAT_U32(" way_inds", WAY_INDIRECT_HITS);
+ PRINT_TSTAT_U32(" way_miss", WAY_MISSES);
+ PRINT_TSTAT_U32(" way_cols", WAY_COLLISIONS);
+ PRINT_TSTAT_U32(" drops ", DROPPED_PACKETS);
+ PRINT_TSTAT_U32(" marks ", ECN_MARKED_PACKETS);
+ PRINT_TSTAT_U32(" ack_drop", ACKS_DROPPED_PACKETS);
+ PRINT_TSTAT_U32(" sp_flows", SPARSE_FLOWS);
+ PRINT_TSTAT_U32(" bk_flows", BULK_FLOWS);
+ PRINT_TSTAT_U32(" un_flows", UNRESPONSIVE_FLOWS);
+ PRINT_TSTAT_U32(" max_len ", MAX_SKBLEN);
+ PRINT_TSTAT_U32(" quantum ", FLOW_QUANTUM);
+
+#undef GET_STAT
+#undef PRINT_TSTAT
+#undef SPRINT_TSTAT
+#undef PRINT_TSTAT_U32
+#undef PRINT_TSTAT_U64
+ }
+ return 0;
+}
+
+struct qdisc_util cake_qdisc_util = {
+ .id = "cake",
+ .parse_qopt = cake_parse_opt,
+ .print_qopt = cake_print_opt,
+ .print_xstats = cake_print_xstats,
+};
projects / mirror_iproute2.git / commitdiff