struct dc_stream_state *stream = pipe_ctx->stream;
enum dc_color_space color_space;
struct tg_color black_color = {0};
- bool enableStereo = stream->timing.timing_3d_format == TIMING_3D_FORMAT_NONE ?
- false:true;
- bool rightEyePolarity = stream->timing.flags.RIGHT_EYE_3D_POLARITY;
/* by upper caller loop, pipe0 is parent pipe and be called first.
* back end is set up by for pipe0. Other children pipe share back end
&stream->timing,
true);
- pipe_ctx->stream_res.opp->funcs->opp_set_stereo_polarity(
- pipe_ctx->stream_res.opp,
- enableStereo,
- rightEyePolarity);
-
#if 0 /* move to after enable_crtc */
/* TODO: OPP FMT, ABM. etc. should be done here. */
/* or FPGA now. instance 0 only. TODO: move to opp.c */
dcn10_config_stereo_parameters(stream, &flags);
- pipe_ctx->stream_res.opp->funcs->opp_set_stereo_polarity(
+ pipe_ctx->stream_res.opp->funcs->opp_program_stereo(
pipe_ctx->stream_res.opp,
flags.PROGRAM_STEREO == 1 ? true:false,
- stream->timing.flags.RIGHT_EYE_3D_POLARITY == 1 ? true:false);
+ &stream->timing);
pipe_ctx->stream_res.tg->funcs->program_stereo(
pipe_ctx->stream_res.tg,
return;
}
-void opp1_set_stereo_polarity(
- struct output_pixel_processor *opp,
- bool enable, bool rightEyePolarity)
+void opp1_program_stereo(
+ struct output_pixel_processor *opp,
+ bool enable,
+ const struct dc_crtc_timing *timing)
{
struct dcn10_opp *oppn10 = TO_DCN10_OPP(opp);
- REG_UPDATE(FMT_CONTROL, FMT_STEREOSYNC_OVERRIDE, enable);
+ uint32_t active_width = timing->h_addressable - timing->h_border_right - timing->h_border_right;
+ uint32_t space1_size = timing->v_total - timing->v_addressable;
+ /* TODO: confirm computation of space2_size */
+ uint32_t space2_size = timing->v_total - timing->v_addressable;
+
+ if (!enable) {
+ active_width = 0;
+ space1_size = 0;
+ space2_size = 0;
+ }
+
+ /* TODO: for which cases should FMT_STEREOSYNC_OVERRIDE be set? */
+ REG_UPDATE(FMT_CONTROL, FMT_STEREOSYNC_OVERRIDE, 0);
+
+ REG_UPDATE(OPPBUF_CONTROL, OPPBUF_ACTIVE_WIDTH, active_width);
+
+ /* Program OPPBUF_3D_VACT_SPACE1_SIZE and OPPBUF_VACT_SPACE2_SIZE registers
+ * In 3D progressive frames, Vactive space happens only in between the 2 frames,
+ * so only need to program OPPBUF_3D_VACT_SPACE1_SIZE
+ * In 3D alternative frames, left and right frames, top and bottom field.
+ */
+ if (timing->timing_3d_format == TIMING_3D_FORMAT_FRAME_ALTERNATE)
+ REG_UPDATE(OPPBUF_3D_PARAMETERS_0, OPPBUF_3D_VACT_SPACE2_SIZE, space2_size);
+ else
+ REG_UPDATE(OPPBUF_3D_PARAMETERS_0, OPPBUF_3D_VACT_SPACE1_SIZE, space1_size);
+
+ /* TODO: Is programming of OPPBUF_DUMMY_DATA_R/G/B needed? */
+ /*
+ REG_UPDATE(OPPBUF_3D_PARAMETERS_0,
+ OPPBUF_DUMMY_DATA_R, data_r);
+ REG_UPDATE(OPPBUF_3D_PARAMETERS_1,
+ OPPBUF_DUMMY_DATA_G, data_g);
+ REG_UPDATE(OPPBUF_3D_PARAMETERS_1,
+ OPPBUF_DUMMY_DATA_B, _data_b);
+ */
+}
+
+void opp1_program_oppbuf(
+ struct output_pixel_processor *opp,
+ struct oppbuf_params *oppbuf)
+{
+ struct dcn10_opp *oppn10 = TO_DCN10_OPP(opp);
+
+ /* Program the oppbuf active width to be the frame width from mpc */
+ REG_UPDATE(OPPBUF_CONTROL, OPPBUF_ACTIVE_WIDTH, oppbuf->active_width);
+
+ /* Specifies the number of segments in multi-segment mode (DP-MSO operation)
+ * description "In 1/2/4 segment mode, specifies the horizontal active width in pixels of the display panel.
+ * In 4 segment split left/right mode, specifies the horizontal 1/2 active width in pixels of the display panel.
+ * Used to determine segment boundaries in multi-segment mode. Used to determine the width of the vertical active space in 3D frame packed modes.
+ * OPPBUF_ACTIVE_WIDTH must be integer divisible by the total number of segments."
+ */
+ REG_UPDATE(OPPBUF_CONTROL, OPPBUF_DISPLAY_SEGMENTATION, oppbuf->mso_segmentation);
+
+ /* description "Specifies the number of overlap pixels (1-8 overlapping pixels supported), used in multi-segment mode (DP-MSO operation)" */
+ REG_UPDATE(OPPBUF_CONTROL, OPPBUF_OVERLAP_PIXEL_NUM, oppbuf->mso_overlap_pixel_num);
+
+ /* description "Specifies the number of times a pixel is replicated (0-15 pixel replications supported).
+ * A value of 0 disables replication. The total number of times a pixel is output is OPPBUF_PIXEL_REPETITION + 1."
+ */
+ REG_UPDATE(OPPBUF_CONTROL, OPPBUF_PIXEL_REPETITION, oppbuf->pixel_repetition);
+
}
/*****************************************/
.opp_set_dyn_expansion = opp1_set_dyn_expansion,
.opp_program_fmt = opp1_program_fmt,
.opp_program_bit_depth_reduction = opp1_program_bit_depth_reduction,
- .opp_set_stereo_polarity = opp1_set_stereo_polarity,
+ .opp_program_stereo = opp1_program_stereo,
.opp_destroy = opp1_destroy
};
SRI(FMT_DITHER_RAND_B_SEED, FMT, id), \
SRI(FMT_CLAMP_CNTL, FMT, id), \
SRI(FMT_DYNAMIC_EXP_CNTL, FMT, id), \
- SRI(FMT_MAP420_MEMORY_CONTROL, FMT, id)
+ SRI(FMT_MAP420_MEMORY_CONTROL, FMT, id), \
+ SRI(OPPBUF_CONTROL, OPPBUF, id),\
+ SRI(OPPBUF_3D_PARAMETERS_0, OPPBUF, id), \
+ SRI(OPPBUF_3D_PARAMETERS_1, OPPBUF, id)
#define OPP_REG_LIST_DCN10(id) \
OPP_REG_LIST_DCN(id)
uint32_t FMT_DITHER_RAND_B_SEED; \
uint32_t FMT_CLAMP_CNTL; \
uint32_t FMT_DYNAMIC_EXP_CNTL; \
- uint32_t FMT_MAP420_MEMORY_CONTROL;
+ uint32_t FMT_MAP420_MEMORY_CONTROL; \
+ uint32_t OPPBUF_CONTROL; \
+ uint32_t OPPBUF_CONTROL1; \
+ uint32_t OPPBUF_3D_PARAMETERS_0; \
+ uint32_t OPPBUF_3D_PARAMETERS_1
#define OPP_MASK_SH_LIST_DCN(mask_sh) \
OPP_SF(FMT0_FMT_BIT_DEPTH_CONTROL, FMT_TRUNCATE_EN, mask_sh), \
OPP_SF(FMT0_FMT_CLAMP_CNTL, FMT_CLAMP_COLOR_FORMAT, mask_sh), \
OPP_SF(FMT0_FMT_DYNAMIC_EXP_CNTL, FMT_DYNAMIC_EXP_EN, mask_sh), \
OPP_SF(FMT0_FMT_DYNAMIC_EXP_CNTL, FMT_DYNAMIC_EXP_MODE, mask_sh), \
- OPP_SF(FMT0_FMT_MAP420_MEMORY_CONTROL, FMT_MAP420MEM_PWR_FORCE, mask_sh)
+ OPP_SF(FMT0_FMT_MAP420_MEMORY_CONTROL, FMT_MAP420MEM_PWR_FORCE, mask_sh), \
+ OPP_SF(OPPBUF0_OPPBUF_CONTROL, OPPBUF_ACTIVE_WIDTH, mask_sh),\
+ OPP_SF(OPPBUF0_OPPBUF_CONTROL, OPPBUF_PIXEL_REPETITION, mask_sh),\
+ OPP_SF(OPPBUF0_OPPBUF_3D_PARAMETERS_0, OPPBUF_3D_VACT_SPACE1_SIZE, mask_sh), \
+ OPP_SF(OPPBUF0_OPPBUF_3D_PARAMETERS_0, OPPBUF_3D_VACT_SPACE2_SIZE, mask_sh)
#define OPP_MASK_SH_LIST_DCN10(mask_sh) \
- OPP_MASK_SH_LIST_DCN(mask_sh)
+ OPP_MASK_SH_LIST_DCN(mask_sh), \
+ OPP_SF(OPPBUF0_OPPBUF_CONTROL, OPPBUF_DISPLAY_SEGMENTATION, mask_sh),\
+ OPP_SF(OPPBUF0_OPPBUF_CONTROL, OPPBUF_OVERLAP_PIXEL_NUM, mask_sh)
#define OPP_DCN10_REG_FIELD_LIST(type) \
type FMT_TRUNCATE_EN; \
type FMT_DYNAMIC_EXP_EN; \
type FMT_DYNAMIC_EXP_MODE; \
type FMT_MAP420MEM_PWR_FORCE; \
- type FMT_STEREOSYNC_OVERRIDE;
+ type FMT_STEREOSYNC_OVERRIDE; \
+ type OPPBUF_ACTIVE_WIDTH;\
+ type OPPBUF_PIXEL_REPETITION;\
+ type OPPBUF_DISPLAY_SEGMENTATION;\
+ type OPPBUF_OVERLAP_PIXEL_NUM;\
+ type OPPBUF_NUM_SEGMENT_PADDED_PIXELS; \
+ type OPPBUF_3D_VACT_SPACE1_SIZE; \
+ type OPPBUF_3D_VACT_SPACE2_SIZE
struct dcn10_opp_registers {
- OPP_COMMON_REG_VARIABLE_LIST
+ OPP_COMMON_REG_VARIABLE_LIST;
};
struct dcn10_opp_shift {
- OPP_DCN10_REG_FIELD_LIST(uint8_t)
+ OPP_DCN10_REG_FIELD_LIST(uint8_t);
};
struct dcn10_opp_mask {
- OPP_DCN10_REG_FIELD_LIST(uint32_t)
+ OPP_DCN10_REG_FIELD_LIST(uint32_t);
};
struct dcn10_opp {
struct output_pixel_processor *opp,
const struct bit_depth_reduction_params *params);
-void opp1_set_stereo_polarity(
- struct output_pixel_processor *opp,
- bool enable, bool rightEyePolarity);
+void opp1_program_stereo(
+ struct output_pixel_processor *opp,
+ bool enable,
+ const struct dc_crtc_timing *timing);
void opp1_destroy(struct output_pixel_processor **opp);
OTG_3D_STRUCTURE_EN, 0,
OTG_3D_STRUCTURE_V_UPDATE_MODE, 0,
OTG_3D_STRUCTURE_STEREO_SEL_OVR, 0);
-
- REG_UPDATE(OPPBUF_CONTROL,
- OPPBUF_ACTIVE_WIDTH, 0);
- REG_UPDATE(OPPBUF_3D_PARAMETERS_0,
- OPPBUF_3D_VACT_SPACE1_SIZE, 0);
}
/**
*v_position = position.vertical_count;
}
-
-
static void optc1_enable_stereo(struct timing_generator *optc,
const struct dc_crtc_timing *timing, struct crtc_stereo_flags *flags)
{
struct optc *optc1 = DCN10TG_FROM_TG(optc);
- uint32_t active_width = timing->h_addressable;
- uint32_t space1_size = timing->v_total - timing->v_addressable;
-
if (flags) {
uint32_t stereo_en;
stereo_en = flags->FRAME_PACKED == 0 ? 1 : 0;
OTG_3D_STRUCTURE_STEREO_SEL_OVR, flags->FRAME_PACKED);
}
-
- REG_UPDATE(OPPBUF_CONTROL,
- OPPBUF_ACTIVE_WIDTH, active_width);
-
- REG_UPDATE(OPPBUF_3D_PARAMETERS_0,
- OPPBUF_3D_VACT_SPACE1_SIZE, space1_size);
}
void optc1_program_stereo(struct timing_generator *optc,
SRI(OPTC_INPUT_CLOCK_CONTROL, ODM, inst),\
SRI(OPTC_DATA_SOURCE_SELECT, ODM, inst),\
SRI(OPTC_INPUT_GLOBAL_CONTROL, ODM, inst),\
- SRI(OPPBUF_CONTROL, OPPBUF, inst),\
- SRI(OPPBUF_3D_PARAMETERS_0, OPPBUF, inst),\
SRI(CONTROL, VTG, inst),\
SRI(OTG_VERT_SYNC_CONTROL, OTG, inst),\
SRI(OTG_MASTER_UPDATE_MODE, OTG, inst),\
uint32_t OPTC_INPUT_CLOCK_CONTROL;
uint32_t OPTC_DATA_SOURCE_SELECT;
uint32_t OPTC_INPUT_GLOBAL_CONTROL;
- uint32_t OPPBUF_CONTROL;
- uint32_t OPPBUF_3D_PARAMETERS_0;
uint32_t CONTROL;
uint32_t OTG_GSL_WINDOW_X;
uint32_t OTG_GSL_WINDOW_Y;
SF(ODM0_OPTC_INPUT_CLOCK_CONTROL, OPTC_INPUT_CLK_GATE_DIS, mask_sh),\
SF(ODM0_OPTC_INPUT_GLOBAL_CONTROL, OPTC_UNDERFLOW_OCCURRED_STATUS, mask_sh),\
SF(ODM0_OPTC_INPUT_GLOBAL_CONTROL, OPTC_UNDERFLOW_CLEAR, mask_sh),\
- SF(OPPBUF0_OPPBUF_CONTROL, OPPBUF_ACTIVE_WIDTH, mask_sh),\
- SF(OPPBUF0_OPPBUF_3D_PARAMETERS_0, OPPBUF_3D_VACT_SPACE1_SIZE, mask_sh),\
SF(VTG0_CONTROL, VTG0_ENABLE, mask_sh),\
SF(VTG0_CONTROL, VTG0_FP2, mask_sh),\
SF(VTG0_CONTROL, VTG0_VCOUNT_INIT, mask_sh),\
type OPTC_SEG0_SRC_SEL;\
type OPTC_UNDERFLOW_OCCURRED_STATUS;\
type OPTC_UNDERFLOW_CLEAR;\
- type OPPBUF_ACTIVE_WIDTH;\
- type OPPBUF_3D_VACT_SPACE1_SIZE;\
type VTG0_ENABLE;\
type VTG0_FP2;\
type VTG0_VCOUNT_INIT;\
OVERLAY_COLOR_TEMPERATURE
};
+enum oppbuf_display_segmentation {
+ OPPBUF_DISPLAY_SEGMENTATION_1_SEGMENT = 0,
+ OPPBUF_DISPLAY_SEGMENTATION_2_SEGMENT = 1,
+ OPPBUF_DISPLAY_SEGMENTATION_4_SEGMENT = 2,
+ OPPBUF_DISPLAY_SEGMENTATION_4_SEGMENT_SPLIT_LEFT = 3,
+ OPPBUF_DISPLAY_SEGMENTATION_4_SEGMENT_SPLIT_RIGHT = 4
+};
+
+struct oppbuf_params {
+ uint32_t active_width;
+ enum oppbuf_display_segmentation mso_segmentation;
+ uint32_t mso_overlap_pixel_num;
+ uint32_t pixel_repetition;
+};
+
struct opp_funcs {
void (*opp_destroy)(struct output_pixel_processor **opp);
- void (*opp_set_stereo_polarity)(
- struct output_pixel_processor *opp,
- bool enable,
- bool rightEyePolarity);
+ void (*opp_program_stereo)(
+ struct output_pixel_processor *opp,
+ bool enable,
+ const struct dc_crtc_timing *timing);
};
projects / mirror_ubuntu-eoan-kernel.git / commitdiff