ARM: ixp4xx: Delete Gateway WG302v2 boardfiles

This board is replaced with the corresponding device tree.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 4f233c509f6d6f31b45346f163ae000f4d155e6a..04165bffa27af42ab239f360bb35a26e3b8bf0bb 100644 (file)
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -49,14 +49,6 @@ config MACH_GATEWAY7001
          7001 Access Point. For more information on this platform,
          see http://openwrt.org
 
-config MACH_WG302V2
-       bool "Netgear WG302 v2 / WAG302 v2"
-       depends on IXP4XX_PCI_LEGACY
-       help
-         Say 'Y' here if you want your kernel to support Netgear's
-         WG302 v2 or WAG302 v2 Access Points. For more information
-         on this platform, see http://openwrt.org
-
 config ARCH_IXDP425
        bool "IXDP425"
        depends on IXP4XX_PCI_LEGACY

diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 4ef8629579ef821b40fb02e3391b402fbe4dca8e..738a37ccc7a1aa424f50e1cae43f20c519aa06ea 100644 (file)
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -15,7 +15,6 @@ obj-pci-$(CONFIG_MACH_IXDPG425)               += ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)      += coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)                += gtwx5715-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)     += gateway7001-pci.o
-obj-pci-$(CONFIG_MACH_WG302V2)         += wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)             += fsg-pci.o
 obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)    += vulcan-pci.o
 
@@ -27,7 +26,6 @@ obj-$(CONFIG_MACH_IXDPG425)   += coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)  += coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)    += gtwx5715-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-obj-$(CONFIG_MACH_WG302V2)     += wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)         += fsg-setup.o
 obj-$(CONFIG_MACH_GORAMO_MLR)  += goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)        += vulcan-setup.o

diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
deleted file mode 100644 (file)
index 1247e7c..0000000
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/wg302v2-pci.c
- *
- * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *     Copyright (C) 2002 Jungo Software Technologies.
- *     Copyright (C) 2003 MontaVista Software, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init wg302v2_pci_preinit(void)
-{
-       irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-       irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-
-       ixp4xx_pci_preinit();
-}
-
-static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-       if (slot == 1)
-               return IRQ_IXP4XX_GPIO8;
-       else if (slot == 2)
-               return IRQ_IXP4XX_GPIO9;
-       else return -1;
-}
-
-struct hw_pci wg302v2_pci __initdata = {
-       .nr_controllers = 1,
-       .ops = &ixp4xx_ops,
-       .preinit =        wg302v2_pci_preinit,
-       .setup =          ixp4xx_setup,
-       .map_irq =        wg302v2_map_irq,
-};
-
-int __init wg302v2_pci_init(void)
-{
-       if (machine_is_wg302v2())
-               pci_common_init(&wg302v2_pci);
-       return 0;
-}
-
-subsys_initcall(wg302v2_pci_init);

diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
deleted file mode 100644 (file)
index 8711e29..0000000
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/wg302-setup.c
- *
- * Board setup for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <kaloz@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data wg302v2_flash_data = {
-       .map_name       = "cfi_probe",
-       .width          = 2,
-};
-
-static struct resource wg302v2_flash_resource = {
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device wg302v2_flash = {
-       .name           = "IXP4XX-Flash",
-       .id             = 0,
-       .dev            = {
-               .platform_data = &wg302v2_flash_data,
-       },
-       .num_resources  = 1,
-       .resource       = &wg302v2_flash_resource,
-};
-
-static struct resource wg302v2_uart_resource = {
-       .start  = IXP4XX_UART2_BASE_PHYS,
-       .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-       .flags  = IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port wg302v2_uart_data[] = {
-       {
-               .mapbase        = IXP4XX_UART2_BASE_PHYS,
-               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-               .irq            = IRQ_IXP4XX_UART2,
-               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-               .iotype         = UPIO_MEM,
-               .regshift       = 2,
-               .uartclk        = IXP4XX_UART_XTAL,
-       },
-       { },
-};
-
-static struct platform_device wg302v2_uart = {
-       .name           = "serial8250",
-       .id             = PLAT8250_DEV_PLATFORM,
-       .dev                    = {
-               .platform_data  = wg302v2_uart_data,
-       },
-       .num_resources  = 1,
-       .resource       = &wg302v2_uart_resource,
-};
-
-static struct platform_device *wg302v2_devices[] __initdata = {
-       &wg302v2_flash,
-       &wg302v2_uart,
-};
-
-static void __init wg302v2_init(void)
-{
-       ixp4xx_sys_init();
-
-       wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-       wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-       platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
-}
-
-#ifdef CONFIG_MACH_WG302V2
-MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-       .map_io         = ixp4xx_map_io,
-       .init_early     = ixp4xx_init_early,
-       .init_irq       = ixp4xx_init_irq,
-       .init_time      = ixp4xx_timer_init,
-       .atag_offset    = 0x100,
-       .init_machine   = wg302v2_init,
-#if defined(CONFIG_PCI)
-       .dma_zone_size  = SZ_64M,
-#endif
-       .restart        = ixp4xx_restart,
-MACHINE_END
-#endif