]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
bnx2x: Swap BCM8073 PHY polarity if required
authorYaniv Rosner <yanivr@broadcom.com>
Tue, 18 Jan 2011 04:33:18 +0000 (04:33 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 19 Jan 2011 00:10:36 +0000 (16:10 -0800)
Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2x/bnx2x_hsi.h
drivers/net/bnx2x/bnx2x_link.c

index 6238d4f63989e5f5c6340b64d028cc37613600e2..548f5631c0dc1e56a2b7df3c5e3596e75639e2e5 100644 (file)
@@ -352,6 +352,10 @@ struct port_hw_cfg {                           /* port 0: 0x12c  port 1: 0x2bc */
 #define PORT_HW_CFG_LANE_SWAP_CFG_31203120         0x0000d8d8
        /* forced only */
 #define PORT_HW_CFG_LANE_SWAP_CFG_32103210         0x0000e4e4
+    /* Indicate whether to swap the external phy polarity */
+#define PORT_HW_CFG_SWAP_PHY_POLARITY_MASK            0x00010000
+#define PORT_HW_CFG_SWAP_PHY_POLARITY_DISABLED     0x00000000
+#define PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED      0x00010000
 
        u32 external_phy_config;
 #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK       0xff000000
index 43b0de24f3918cf42e886dfc7cbd022493bf21a4..77f9eb193cbac923623f501ed68c61ff6956edfa 100644 (file)
@@ -4108,6 +4108,25 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
 
        DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
 
+       /**
+        * If this is forced speed, set to KR or KX (all other are not
+        * supported)
+        */
+       /* Swap polarity if required - Must be done only in non-1G mode */
+       if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
+               /* Configure the 8073 to swap _P and _N of the KR lines */
+               DP(NETIF_MSG_LINK, "Swapping polarity for the 8073\n");
+               /* 10G Rx/Tx and 1G Tx signal polarity swap */
+               bnx2x_cl45_read(bp, phy,
+                               MDIO_PMA_DEVAD,
+                               MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val);
+               bnx2x_cl45_write(bp, phy,
+                                MDIO_PMA_DEVAD,
+                                MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL,
+                                (val | (3<<9)));
+       }
+
+
        /* Enable CL37 BAM */
        if (REG_RD(bp, params->shmem_base +
                         offsetof(struct shmem_region, dev_info.
@@ -4314,6 +4333,29 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy,
        }
 
        if (link_up) {
+               /* Swap polarity if required */
+               if (params->lane_config &
+                   PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
+                       /* Configure the 8073 to swap P and N of the KR lines */
+                       bnx2x_cl45_read(bp, phy,
+                                       MDIO_XS_DEVAD,
+                                       MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1);
+                       /**
+                       * Set bit 3 to invert Rx in 1G mode and clear this bit
+                       * when it`s in 10G mode.
+                       */
+                       if (vars->line_speed == SPEED_1000) {
+                               DP(NETIF_MSG_LINK, "Swapping 1G polarity for"
+                                             "the 8073\n");
+                               val1 |= (1<<3);
+                       } else
+                               val1 &= ~(1<<3);
+
+                       bnx2x_cl45_write(bp, phy,
+                                        MDIO_XS_DEVAD,
+                                        MDIO_XS_REG_8073_RX_CTRL_PCIE,
+                                        val1);
+               }
                bnx2x_ext_phy_10G_an_resolve(bp, phy, vars);
                bnx2x_8073_resolve_fc(phy, params, vars);
        }