* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: Clean up thermal init by introducing intel_thermal_supported()
x86, mce: Thermal monitoring depends on APIC being enabled
x86: Gart: fix breakage due to IOMMU initialization cleanup
x86: Move swiotlb initialization before dma32_free_bootmem
x86: Fix build warning in arch/x86/mm/mmio-mod.c
x86: Remove usedac in feature-removal-schedule.txt
x86: Fix duplicated UV BAU interrupt vector
nvram: Fix write beyond end condition; prove to gcc copy is safe
mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
x86: Limit the number of processor bootup messages
x86: Remove enabling x2apic message for every CPU
doc: Add documentation for bootloader_{type,version}
x86, msr: Add support for non-contiguous cpumasks
x86: Use find_e820() instead of hard coded trampoline address
x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks
Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
---------------------------
-What: usedac i386 kernel parameter
-When: 2.6.27
-Why: replaced by allowdac and no dac combination
-Who: Glauber Costa <gcosta@redhat.com>
-
----------------------------
-
What: print_fn_descriptor_symbol()
When: October 2009
Why: The %pF vsprintf format provides the same functionality in a
show up in /proc/sys/kernel:
- acpi_video_flags
- acct
+- bootloader_type [ X86 only ]
+- bootloader_version [ X86 only ]
- callhome [ S390 only ]
- auto_msgmni
- core_pattern
==============================================================
+bootloader_type:
+
+x86 bootloader identification
+
+This gives the bootloader type number as indicated by the bootloader,
+shifted left by 4, and OR'd with the low four bits of the bootloader
+version. The reason for this encoding is that this used to match the
+type_of_loader field in the kernel header; the encoding is kept for
+backwards compatibility. That is, if the full bootloader type number
+is 0x15 and the full version number is 0x234, this file will contain
+the value 340 = 0x154.
+
+See the type_of_loader and ext_loader_type fields in
+Documentation/x86/boot.txt for additional information.
+
+==============================================================
+
+bootloader_version:
+
+x86 bootloader version
+
+The complete bootloader version number. In the example above, this
+file will contain the value 564 = 0x234.
+
+See the type_of_loader and ext_loader_ver fields in
+Documentation/x86/boot.txt for additional information.
+
+==============================================================
+
callhome:
Controls the kernel's callhome behavior in case of a kernel panic.
*/
#define LOCAL_PENDING_VECTOR 0xec
-#define UV_BAU_MESSAGE 0xec
+#define UV_BAU_MESSAGE 0xea
/*
* Self IPI vector for machine checks
#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
+struct msr *msrs_alloc(void);
+void msrs_free(struct msr *msrs);
+
#ifdef CONFIG_SMP
int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
extern unsigned long initial_gs;
#define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE)
-#define TRAMPOLINE_BASE 0x6000
extern unsigned long setup_trampoline(void);
extern void __init reserve_trampoline_memory(void);
* or BIOS forget to put that in reserved.
* try to update e820 to make that region as reserved.
*/
- int i, fix, slot;
+ u32 agp_aper_base = 0, agp_aper_order = 0;
+ int i, fix, slot, valid_agp = 0;
u32 ctl;
u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base = 0, last_aper_base = 0;
return;
/* This is mostly duplicate of iommu_hole_init */
+ agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp);
+
fix = 0;
for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
int bus;
}
}
- if (!fix)
+ if (valid_agp)
return;
- /* different nodes have different setting, disable them all at first*/
+ /* disable them all at first */
for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
int bus;
int dev_base, dev_limit;
if (aper_alloc) {
/* Got the aperture from the AGP bridge */
- } else if (!valid_agp) {
- /* Do nothing */
} else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) ||
force_iommu ||
valid_agp ||
rdmsr(MSR_IA32_APICBASE, msr, msr2);
if (!(msr & X2APIC_ENABLE)) {
- pr_info("Enabling x2apic\n");
+ printk_once(KERN_INFO "Enabling x2apic\n");
wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
}
}
unsigned int eax, ebx, ecx, edx, sub_index;
unsigned int ht_mask_width, core_plus_mask_width;
unsigned int core_select_mask, core_level_siblings;
+ static bool printed;
if (c->cpuid_level < 0xb)
return;
c->x86_max_cores = (core_level_siblings / smp_num_siblings);
-
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- c->phys_proc_id);
- if (c->x86_max_cores > 1)
- printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- c->cpu_core_id);
+ if (!printed) {
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ c->phys_proc_id);
+ if (c->x86_max_cores > 1)
+ printk(KERN_INFO "CPU: Processor Core ID: %d\n",
+ c->cpu_core_id);
+ printed = 1;
+ }
return;
#endif
}
node = nearby_node(apicid);
}
numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
#endif
}
#ifdef CONFIG_X86_HT
u32 eax, ebx, ecx, edx;
int index_msb, core_bits;
+ static bool printed;
if (!cpu_has(c, X86_FEATURE_HT))
return;
smp_num_siblings = (ebx & 0xff0000) >> 16;
if (smp_num_siblings == 1) {
- printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
+ printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n");
goto out;
}
((1 << core_bits) - 1);
out:
- if ((c->x86_max_cores * smp_num_siblings) > 1) {
+ if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
c->phys_proc_id);
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
c->cpu_core_id);
+ printed = 1;
}
#endif
}
if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask))
panic("CPU#%d already initialized!\n", cpu);
- printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+ pr_debug("Initializing CPU#%d\n", cpu);
clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
node = cpu_to_node(cpu);
}
numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
#endif
}
{
struct _cpuid4_info *this_leaf, *sibling_leaf;
unsigned long num_threads_sharing;
- int index_msb, i;
+ int index_msb, i, sibling;
struct cpuinfo_x86 *c = &cpu_data(cpu);
if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
- struct cpuinfo_x86 *d;
- for_each_online_cpu(i) {
+ for_each_cpu(i, c->llc_shared_map) {
if (!per_cpu(ici_cpuid4_info, i))
continue;
- d = &cpu_data(i);
this_leaf = CPUID4_INFO_IDX(i, index);
- cpumask_copy(to_cpumask(this_leaf->shared_cpu_map),
- d->llc_shared_map);
+ for_each_cpu(sibling, c->llc_shared_map) {
+ if (!cpu_online(sibling))
+ continue;
+ set_bit(sibling, this_leaf->shared_cpu_map);
+ }
}
return;
}
ack_APIC_irq();
}
+/* Thermal monitoring depends on APIC, ACPI and clock modulation */
+static int intel_thermal_supported(struct cpuinfo_x86 *c)
+{
+ if (!cpu_has_apic)
+ return 0;
+ if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+ return 0;
+ return 1;
+}
+
void __init mcheck_intel_therm_init(void)
{
/*
* LVT value on BSP and use that value to restore APs' thermal LVT
* entry BIOS programmed later
*/
- if (cpu_has(&boot_cpu_data, X86_FEATURE_ACPI) &&
- cpu_has(&boot_cpu_data, X86_FEATURE_ACC))
+ if (intel_thermal_supported(&boot_cpu_data))
lvtthmr_init = apic_read(APIC_LVTTHMR);
}
int tm2 = 0;
u32 l, h;
- /* Thermal monitoring depends on ACPI and clock modulation*/
- if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+ if (!intel_thermal_supported(c))
return;
/*
l = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
- printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
- cpu, tm2 ? "TM2" : "TM1");
+ printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n",
+ tm2 ? "TM2" : "TM1");
/* enable thermal throttle processing */
atomic_set(&therm_throt_en, 1);
char overlap_ok;
};
static struct early_res early_res[MAX_EARLY_RES] __initdata = {
- { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */
+ { 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */
+#ifdef CONFIG_X86_32
+ /*
+ * But first pinch a few for the stack/trampoline stuff
+ * FIXME: Don't need the extra page at 4K, but need to fix
+ * trampoline before removing it. (see the GDT stuff)
+ */
+ { PAGE_SIZE, PAGE_SIZE, "EX TRAMPOLINE", 1 },
+#endif
+
{}
};
void __init i386_start_kernel(void)
{
- reserve_trampoline_memory();
-
reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
#ifdef CONFIG_BLK_DEV_INITRD
{
copy_bootdata(__va(real_mode_data));
- reserve_trampoline_memory();
-
reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
#ifdef CONFIG_BLK_DEV_INITRD
{
if (enable_update_mptable && alloc_mptable) {
u64 startt = 0;
-#ifdef CONFIG_X86_TRAMPOLINE
- startt = TRAMPOLINE_BASE;
-#endif
mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
}
}
void __init pci_iommu_alloc(void)
{
+ int use_swiotlb;
+
+ use_swiotlb = pci_swiotlb_init();
#ifdef CONFIG_X86_64
/* free the range so iommu could get some range less than 4G */
dma32_free_bootmem();
#endif
- if (pci_swiotlb_init())
+ if (use_swiotlb)
return;
gart_iommu_hole_init();
struct pci_dev *dev;
int i;
- if (no_agp)
+ /* don't shutdown it if there is AGP installed */
+ if (!no_agp)
return;
for (i = 0; i < num_k8_northbridges; i++) {
#include <asm/mtrr.h>
#include <asm/apic.h>
+#include <asm/trampoline.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
reserve_brk();
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+
+ reserve_trampoline_memory();
+
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
early_acpi_boot_init();
- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
-
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
complete(&c_idle->done);
}
+/* reduce the number of lines printed when booting a large cpu count system */
+static void __cpuinit announce_cpu(int cpu, int apicid)
+{
+ static int current_node = -1;
+ int node = cpu_to_node(cpu);
+
+ if (system_state == SYSTEM_BOOTING) {
+ if (node != current_node) {
+ if (current_node > (-1))
+ pr_cont(" Ok.\n");
+ current_node = node;
+ pr_info("Booting Node %3d, Processors ", node);
+ }
+ pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : "");
+ return;
+ } else
+ pr_info("Booting Node %d Processor %d APIC 0x%x\n",
+ node, cpu, apicid);
+}
+
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
/* start_ip had better be page-aligned! */
start_ip = setup_trampoline();
- /* So we see what's up */
- printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n",
- cpu, apicid, start_ip);
+ /* So we see what's up */
+ announce_cpu(cpu, apicid);
/*
* This grunge runs the startup process for
udelay(100);
}
- if (cpumask_test_cpu(cpu, cpu_callin_mask)) {
- /* number CPUs logically, starting from 1 (BSP is 0) */
- pr_debug("OK.\n");
- printk(KERN_INFO "CPU%d: ", cpu);
- print_cpu_info(&cpu_data(cpu));
- pr_debug("CPU has booted.\n");
- } else {
+ if (cpumask_test_cpu(cpu, cpu_callin_mask))
+ pr_debug("CPU%d: has booted.\n", cpu);
+ else {
boot_error = 1;
if (*((volatile unsigned char *)trampoline_base)
== 0xA5)
/* trampoline started but...? */
- printk(KERN_ERR "Stuck ??\n");
+ pr_err("CPU%d: Stuck ??\n", cpu);
else
/* trampoline code not run */
- printk(KERN_ERR "Not responding.\n");
+ pr_err("CPU%d: Not responding.\n", cpu);
if (apic->inquire_remote_apic)
apic->inquire_remote_apic(apicid);
}
for (i = 0; i < 10; i++) {
/* They ack this in play_dead by setting CPU_DEAD */
if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- printk(KERN_INFO "CPU %d is now offline\n", cpu);
+ if (system_state == SYSTEM_RUNNING)
+ pr_info("CPU %u is now offline\n", cpu);
+
if (1 == num_online_cpus())
alternatives_smp_switch(0);
return;
}
msleep(100);
}
- printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+ pr_err("CPU %u didn't die...\n", cpu);
}
void play_dead_common(void)
#endif
/* ready for x86_64 and x86 */
-unsigned char *__trampinitdata trampoline_base = __va(TRAMPOLINE_BASE);
+unsigned char *__trampinitdata trampoline_base;
void __init reserve_trampoline_memory(void)
{
-#ifdef CONFIG_X86_32
- /*
- * But first pinch a few for the stack/trampoline stuff
- * FIXME: Don't need the extra page at 4K, but need to fix
- * trampoline before removing it. (see the GDT stuff)
- */
- reserve_early(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE");
-#endif
+ unsigned long mem;
+
/* Has to be in very low memory so we can execute real-mode AP code. */
- reserve_early(TRAMPOLINE_BASE, TRAMPOLINE_BASE + TRAMPOLINE_SIZE,
- "TRAMPOLINE");
+ mem = find_e820_area(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE);
+ if (mem == -1L)
+ panic("Cannot allocate trampoline\n");
+
+ trampoline_base = __va(mem);
+ reserve_early(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE");
}
/*
u32 msr_no;
struct msr reg;
struct msr *msrs;
- int off;
int err;
};
int this_cpu = raw_smp_processor_id();
if (rv->msrs)
- reg = &rv->msrs[this_cpu - rv->off];
+ reg = per_cpu_ptr(rv->msrs, this_cpu);
else
reg = &rv->reg;
int this_cpu = raw_smp_processor_id();
if (rv->msrs)
- reg = &rv->msrs[this_cpu - rv->off];
+ reg = per_cpu_ptr(rv->msrs, this_cpu);
else
reg = &rv->reg;
memset(&rv, 0, sizeof(rv));
- rv.off = cpumask_first(mask);
rv.msrs = msrs;
rv.msr_no = msr_no;
}
EXPORT_SYMBOL(wrmsr_on_cpus);
+struct msr *msrs_alloc(void)
+{
+ struct msr *msrs = NULL;
+
+ msrs = alloc_percpu(struct msr);
+ if (!msrs) {
+ pr_warning("%s: error allocating msrs\n", __func__);
+ return NULL;
+ }
+
+ return msrs;
+}
+EXPORT_SYMBOL(msrs_alloc);
+
+void msrs_free(struct msr *msrs)
+{
+ free_percpu(msrs);
+}
+EXPORT_SYMBOL(msrs_free);
+
/* These "safe" variants are slower and should be used when the target MSR
may not actually exist. */
static void __rdmsr_safe_on_cpu(void *info)
* Derived from the read-mod example from relay-examples by Tom Zanussi.
*/
-#define pr_fmt(fmt) "mmiotrace: "
+#define pr_fmt(fmt) "mmiotrace: " fmt
#define DEBUG 1
unsigned char contents[NVRAM_BYTES];
unsigned i = *ppos;
unsigned char *tmp;
- int len;
- len = (NVRAM_BYTES - i) < count ? (NVRAM_BYTES - i) : count;
- if (copy_from_user(contents, buf, len))
+ if (i >= NVRAM_BYTES)
+ return 0; /* Past EOF */
+
+ if (count > NVRAM_BYTES - i)
+ count = NVRAM_BYTES - i;
+ if (count > NVRAM_BYTES)
+ return -EFAULT; /* Can't happen, but prove it to gcc */
+
+ if (copy_from_user(contents, buf, count))
return -EFAULT;
spin_lock_irq(&rtc_lock);
if (!__nvram_check_checksum())
goto checksum_err;
- for (tmp = contents; count-- > 0 && i < NVRAM_BYTES; ++i, ++tmp)
+ for (tmp = contents; count--; ++i, ++tmp)
__nvram_write_byte(*tmp, i);
__nvram_set_checksum();
static int ecc_enable_override;
module_param(ecc_enable_override, int, 0644);
+static struct msr *msrs;
+
/* Lookup table for all possible MC control instances */
struct amd64_pvt;
static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
static bool amd64_nb_mce_bank_enabled_on_node(int nid)
{
cpumask_var_t mask;
- struct msr *msrs;
- int cpu, nbe, idx = 0;
+ int cpu, nbe;
bool ret = false;
if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
get_cpus_on_this_dct_cpumask(mask, nid);
- msrs = kzalloc(sizeof(struct msr) * cpumask_weight(mask), GFP_KERNEL);
- if (!msrs) {
- amd64_printk(KERN_WARNING, "%s: error allocating msrs\n",
- __func__);
- free_cpumask_var(mask);
- return false;
- }
-
rdmsr_on_cpus(mask, MSR_IA32_MCG_CTL, msrs);
for_each_cpu(cpu, mask) {
- nbe = msrs[idx].l & K8_MSR_MCGCTL_NBE;
+ struct msr *reg = per_cpu_ptr(msrs, cpu);
+ nbe = reg->l & K8_MSR_MCGCTL_NBE;
debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
- cpu, msrs[idx].q,
+ cpu, reg->q,
(nbe ? "enabled" : "disabled"));
if (!nbe)
goto out;
-
- idx++;
}
ret = true;
out:
- kfree(msrs);
free_cpumask_var(mask);
return ret;
}
static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
{
cpumask_var_t cmask;
- struct msr *msrs = NULL;
- int cpu, idx = 0;
+ int cpu;
if (!zalloc_cpumask_var(&cmask, GFP_KERNEL)) {
amd64_printk(KERN_WARNING, "%s: error allocating mask\n",
get_cpus_on_this_dct_cpumask(cmask, pvt->mc_node_id);
- msrs = kzalloc(sizeof(struct msr) * cpumask_weight(cmask), GFP_KERNEL);
- if (!msrs) {
- amd64_printk(KERN_WARNING, "%s: error allocating msrs\n",
- __func__);
- return -ENOMEM;
- }
-
rdmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
for_each_cpu(cpu, cmask) {
+ struct msr *reg = per_cpu_ptr(msrs, cpu);
+
if (on) {
- if (msrs[idx].l & K8_MSR_MCGCTL_NBE)
+ if (reg->l & K8_MSR_MCGCTL_NBE)
pvt->flags.ecc_report = 1;
- msrs[idx].l |= K8_MSR_MCGCTL_NBE;
+ reg->l |= K8_MSR_MCGCTL_NBE;
} else {
/*
* Turn off ECC reporting only when it was off before
*/
if (!pvt->flags.ecc_report)
- msrs[idx].l &= ~K8_MSR_MCGCTL_NBE;
+ reg->l &= ~K8_MSR_MCGCTL_NBE;
}
- idx++;
}
wrmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
- kfree(msrs);
free_cpumask_var(cmask);
return 0;
if (cache_k8_northbridges() < 0)
return err;
+ msrs = msrs_alloc();
+
err = pci_register_driver(&amd64_pci_driver);
if (err)
return err;
edac_pci_release_generic_ctl(amd64_ctl_pci);
pci_unregister_driver(&amd64_pci_driver);
+
+ msrs_free(msrs);
+ msrs = NULL;
}
module_init(amd64_edac_init);
int err;
for (i = 0; i < nr_pages; i += chunk_nr) {
- if (chunk_nr + i > nr_pages)
+ if (chunk_nr > nr_pages - i)
chunk_nr = nr_pages - i;
err = copy_from_user(chunk_pages, &pages[i],