/* Hardware specific file defines the PCI IDs table for that hardware module */
extern const struct pci_device_id il3945_hw_card_ids[];
-#include "iwl-csr.h"
#include "iwl-prph.h"
#include "iwl-debug.h"
#include "iwl-power.h"
--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __il_csr_h__
+#define __il_csr_h__
+/*
+ * CSR (control and status registers)
+ *
+ * CSR registers are mapped directly into PCI bus space, and are accessible
+ * whenever platform supplies power to device, even when device is in
+ * low power states due to driver-invoked device resets
+ * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
+ *
+ * Use _il_wr() and _il_rd() family to access these registers;
+ * these provide simple PCI bus access, without waking up the MAC.
+ * Do not use il_wr() family for these registers;
+ * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
+ * The MAC (uCode processor, etc.) does not need to be powered up for accessing
+ * the CSR registers.
+ *
+ * NOTE: Device does need to be awake in order to read this memory
+ * via CSR_EEPROM register
+ */
+#define CSR_BASE (0x000)
+
+#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */
+#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
+#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */
+#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */
+#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/
+#define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */
+#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
+#define CSR_GP_CNTRL (CSR_BASE+0x024)
+
+/* 2nd byte of CSR_INT_COALESCING, not accessible via _il_wr()! */
+#define CSR_INT_PERIODIC_REG (CSR_BASE+0x005)
+
+/*
+ * Hardware revision info
+ * Bit fields:
+ * 31-8: Reserved
+ * 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions
+ * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
+ * 1-0: "Dash" (-) value, as in A-1, etc.
+ *
+ * NOTE: Revision step affects calculation of CCK txpower for 4965.
+ * NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
+ */
+#define CSR_HW_REV (CSR_BASE+0x028)
+
+/*
+ * EEPROM memory reads
+ *
+ * NOTE: Device must be awake, initialized via apm_ops.init(),
+ * in order to read.
+ */
+#define CSR_EEPROM_REG (CSR_BASE+0x02c)
+#define CSR_EEPROM_GP (CSR_BASE+0x030)
+
+#define CSR_GIO_REG (CSR_BASE+0x03C)
+#define CSR_GP_UCODE_REG (CSR_BASE+0x048)
+#define CSR_GP_DRIVER_REG (CSR_BASE+0x050)
+
+/*
+ * UCODE-DRIVER GP (general purpose) mailbox registers.
+ * SET/CLR registers set/clear bit(s) if "1" is written.
+ */
+#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
+#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
+#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
+#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
+
+#define CSR_LED_REG (CSR_BASE+0x094)
+#define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0)
+
+/* GIO Chicken Bits (PCI Express bus link power management) */
+#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
+
+/* Analog phase-lock-loop configuration */
+#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
+
+/*
+ * CSR Hardware Revision Workaround Register. Indicates hardware rev;
+ * "step" determines CCK backoff for txpower calculation. Used for 4965 only.
+ * See also CSR_HW_REV register.
+ * Bit fields:
+ * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
+ * 1-0: "Dash" (-) value, as in C-1, etc.
+ */
+#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
+
+#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240)
+#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250)
+
+/* Bits for CSR_HW_IF_CONFIG_REG */
+#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
+#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00)
+#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
+#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
+
+#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100)
+#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200)
+#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400)
+#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800)
+#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000)
+#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000)
+
+#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
+#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
+#define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */
+
+#define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/
+#define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/
+
+/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
+ * acknowledged (reset) by host writing "1" to flagged bits. */
+#define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
+#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
+#define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */
+#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
+#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
+#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
+#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
+#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
+#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */
+#define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
+#define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
+
+#define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \
+ CSR_INT_BIT_HW_ERR | \
+ CSR_INT_BIT_FH_TX | \
+ CSR_INT_BIT_SW_ERR | \
+ CSR_INT_BIT_RF_KILL | \
+ CSR_INT_BIT_SW_RX | \
+ CSR_INT_BIT_WAKEUP | \
+ CSR_INT_BIT_ALIVE)
+
+/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
+#define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */
+#define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
+#define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */
+#define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
+#define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
+#define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */
+#define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
+#define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
+
+#define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
+ CSR39_FH_INT_BIT_RX_CHNL2 | \
+ CSR_FH_INT_BIT_RX_CHNL1 | \
+ CSR_FH_INT_BIT_RX_CHNL0)
+
+
+#define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \
+ CSR_FH_INT_BIT_TX_CHNL1 | \
+ CSR_FH_INT_BIT_TX_CHNL0)
+
+#define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
+ CSR_FH_INT_BIT_RX_CHNL1 | \
+ CSR_FH_INT_BIT_RX_CHNL0)
+
+#define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \
+ CSR_FH_INT_BIT_TX_CHNL0)
+
+/* GPIO */
+#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200)
+#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000)
+#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200)
+
+/* RESET */
+#define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
+#define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
+#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
+#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
+#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
+#define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
+
+/*
+ * GP (general purpose) CONTROL REGISTER
+ * Bit fields:
+ * 27: HW_RF_KILL_SW
+ * Indicates state of (platform's) hardware RF-Kill switch
+ * 26-24: POWER_SAVE_TYPE
+ * Indicates current power-saving mode:
+ * 000 -- No power saving
+ * 001 -- MAC power-down
+ * 010 -- PHY (radio) power-down
+ * 011 -- Error
+ * 9-6: SYS_CONFIG
+ * Indicates current system configuration, reflecting pins on chip
+ * as forced high/low by device circuit board.
+ * 4: GOING_TO_SLEEP
+ * Indicates MAC is entering a power-saving sleep power-down.
+ * Not a good time to access device-internal resources.
+ * 3: MAC_ACCESS_REQ
+ * Host sets this to request and maintain MAC wakeup, to allow host
+ * access to device-internal resources. Host must wait for
+ * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
+ * device registers.
+ * 2: INIT_DONE
+ * Host sets this to put device into fully operational D0 power mode.
+ * Host resets this after SW_RESET to put device into low power mode.
+ * 0: MAC_CLOCK_READY
+ * Indicates MAC (ucode processor, etc.) is powered up and can run.
+ * Internal resources are accessible.
+ * NOTE: This does not indicate that the processor is actually running.
+ * NOTE: This does not indicate that 4965 or 3945 has completed
+ * init or post-power-down restore of internal SRAM memory.
+ * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
+ * SRAM is restored and uCode is in normal operation mode.
+ * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ * do not need to save/restore it.
+ * NOTE: After device reset, this bit remains "0" until host sets
+ * INIT_DONE
+ */
+#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
+#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
+#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
+#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
+
+#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
+
+#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
+#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000)
+#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)
+
+
+/* EEPROM REG */
+#define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001)
+#define CSR_EEPROM_REG_BIT_CMD (0x00000002)
+#define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC)
+#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
+
+/* EEPROM GP */
+#define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */
+#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004)
+
+/* GP REG */
+#define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */
+#define CSR_GP_REG_NO_POWER_SAVE (0x00000000)
+#define CSR_GP_REG_MAC_POWER_SAVE (0x01000000)
+#define CSR_GP_REG_PHY_POWER_SAVE (0x02000000)
+#define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000)
+
+
+/* CSR GIO */
+#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)
+
+/*
+ * UCODE-DRIVER GP (general purpose) mailbox register 1
+ * Host driver and uCode write and/or read this register to communicate with
+ * each other.
+ * Bit fields:
+ * 4: UCODE_DISABLE
+ * Host sets this to request permanent halt of uCode, same as
+ * sending CARD_STATE command with "halt" bit set.
+ * 3: CT_KILL_EXIT
+ * Host sets this to request exit from CT_KILL state, i.e. host thinks
+ * device temperature is low enough to continue normal operation.
+ * 2: CMD_BLOCKED
+ * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
+ * to release uCode to clear all Tx and command queues, enter
+ * unassociated mode, and power down.
+ * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit.
+ * 1: SW_BIT_RFKILL
+ * Host sets this when issuing CARD_STATE command to request
+ * device sleep.
+ * 0: MAC_SLEEP
+ * uCode sets this when preparing a power-saving power-down.
+ * uCode resets this when power-up is complete and SRAM is sane.
+ * NOTE: 3945/4965 saves internal SRAM data to host when powering down,
+ * and must restore this data after powering back up.
+ * MAC_SLEEP is the best indication that restore is complete.
+ * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ * do not need to save/restore it.
+ */
+#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
+#define CSR_UCODE_SW_BIT_RFKILL (0x00000002)
+#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
+#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
+
+/* GIO Chicken Bits (PCI Express bus link power management) */
+#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
+#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
+
+/* LED */
+#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
+#define CSR_LED_REG_TRUN_ON (0x78)
+#define CSR_LED_REG_TRUN_OFF (0x38)
+
+/* ANA_PLL */
+#define CSR39_ANA_PLL_CFG_VAL (0x01000000)
+
+/* HPET MEM debug */
+#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
+
+/* DRAM INT TBL */
+#define CSR_DRAM_INT_TBL_ENABLE (1 << 31)
+#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
+
+/*
+ * HBUS (Host-side Bus)
+ *
+ * HBUS registers are mapped directly into PCI bus space, but are used
+ * to indirectly access device's internal memory or registers that
+ * may be powered-down.
+ *
+ * Use il_wr()/il_rd() family
+ * for these registers;
+ * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
+ * to make sure the MAC (uCode processor, etc.) is powered up for accessing
+ * internal resources.
+ *
+ * Do not use _il_wr()/_il_rd() family to access these registers;
+ * these provide only simple PCI bus access, without waking up the MAC.
+ */
+#define HBUS_BASE (0x400)
+
+/*
+ * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
+ * structures, error log, event log, verifying uCode load).
+ * First write to address register, then read from or write to data register
+ * to complete the job. Once the address register is set up, accesses to
+ * data registers auto-increment the address by one dword.
+ * Bit usage for address registers (read or write):
+ * 0-31: memory address within device
+ */
+#define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c)
+#define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010)
+#define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018)
+#define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c)
+
+/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
+#define HBUS_TARG_MBX_C (HBUS_BASE+0x030)
+#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004)
+
+/*
+ * Registers for accessing device's internal peripheral registers
+ * (e.g. SCD, BSM, etc.). First write to address register,
+ * then read from or write to data register to complete the job.
+ * Bit usage for address registers (read or write):
+ * 0-15: register address (offset) within device
+ * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword)
+ */
+#define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044)
+#define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048)
+#define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c)
+#define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050)
+
+/*
+ * Per-Tx-queue write pointer (idx, really!)
+ * Indicates idx to next TFD that driver will fill (1 past latest filled).
+ * Bit usage:
+ * 0-7: queue write idx
+ * 11-8: queue selector
+ */
+#define HBUS_TARG_WRPTR (HBUS_BASE+0x060)
+
+#endif /* !__il_csr_h__ */
+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __il_csr_h__
-#define __il_csr_h__
-/*
- * CSR (control and status registers)
- *
- * CSR registers are mapped directly into PCI bus space, and are accessible
- * whenever platform supplies power to device, even when device is in
- * low power states due to driver-invoked device resets
- * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
- *
- * Use _il_wr() and _il_rd() family to access these registers;
- * these provide simple PCI bus access, without waking up the MAC.
- * Do not use il_wr() family for these registers;
- * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
- * The MAC (uCode processor, etc.) does not need to be powered up for accessing
- * the CSR registers.
- *
- * NOTE: Device does need to be awake in order to read this memory
- * via CSR_EEPROM register
- */
-#define CSR_BASE (0x000)
-
-#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */
-#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
-#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */
-#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */
-#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/
-#define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */
-#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
-#define CSR_GP_CNTRL (CSR_BASE+0x024)
-
-/* 2nd byte of CSR_INT_COALESCING, not accessible via _il_wr()! */
-#define CSR_INT_PERIODIC_REG (CSR_BASE+0x005)
-
-/*
- * Hardware revision info
- * Bit fields:
- * 31-8: Reserved
- * 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions
- * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
- * 1-0: "Dash" (-) value, as in A-1, etc.
- *
- * NOTE: Revision step affects calculation of CCK txpower for 4965.
- * NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
- */
-#define CSR_HW_REV (CSR_BASE+0x028)
-
-/*
- * EEPROM memory reads
- *
- * NOTE: Device must be awake, initialized via apm_ops.init(),
- * in order to read.
- */
-#define CSR_EEPROM_REG (CSR_BASE+0x02c)
-#define CSR_EEPROM_GP (CSR_BASE+0x030)
-
-#define CSR_GIO_REG (CSR_BASE+0x03C)
-#define CSR_GP_UCODE_REG (CSR_BASE+0x048)
-#define CSR_GP_DRIVER_REG (CSR_BASE+0x050)
-
-/*
- * UCODE-DRIVER GP (general purpose) mailbox registers.
- * SET/CLR registers set/clear bit(s) if "1" is written.
- */
-#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
-#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
-#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
-#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
-
-#define CSR_LED_REG (CSR_BASE+0x094)
-#define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0)
-
-/* GIO Chicken Bits (PCI Express bus link power management) */
-#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
-
-/* Analog phase-lock-loop configuration */
-#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
-
-/*
- * CSR Hardware Revision Workaround Register. Indicates hardware rev;
- * "step" determines CCK backoff for txpower calculation. Used for 4965 only.
- * See also CSR_HW_REV register.
- * Bit fields:
- * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
- * 1-0: "Dash" (-) value, as in C-1, etc.
- */
-#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
-
-#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240)
-#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250)
-
-/* Bits for CSR_HW_IF_CONFIG_REG */
-#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
-#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00)
-#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
-#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
-
-#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100)
-#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200)
-#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400)
-#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800)
-#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000)
-#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000)
-
-#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
-#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
-#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
-#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
-#define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */
-
-#define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/
-#define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/
-
-/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
- * acknowledged (reset) by host writing "1" to flagged bits. */
-#define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
-#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
-#define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */
-#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
-#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
-#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
-#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
-#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
-#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */
-#define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
-#define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
-
-#define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \
- CSR_INT_BIT_HW_ERR | \
- CSR_INT_BIT_FH_TX | \
- CSR_INT_BIT_SW_ERR | \
- CSR_INT_BIT_RF_KILL | \
- CSR_INT_BIT_SW_RX | \
- CSR_INT_BIT_WAKEUP | \
- CSR_INT_BIT_ALIVE)
-
-/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
-#define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */
-#define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
-#define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */
-#define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
-#define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
-#define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */
-#define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
-#define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
-
-#define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
- CSR39_FH_INT_BIT_RX_CHNL2 | \
- CSR_FH_INT_BIT_RX_CHNL1 | \
- CSR_FH_INT_BIT_RX_CHNL0)
-
-
-#define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \
- CSR_FH_INT_BIT_TX_CHNL1 | \
- CSR_FH_INT_BIT_TX_CHNL0)
-
-#define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
- CSR_FH_INT_BIT_RX_CHNL1 | \
- CSR_FH_INT_BIT_RX_CHNL0)
-
-#define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \
- CSR_FH_INT_BIT_TX_CHNL0)
-
-/* GPIO */
-#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200)
-#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000)
-#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200)
-
-/* RESET */
-#define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
-#define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
-#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
-#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
-#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
-#define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
-
-/*
- * GP (general purpose) CONTROL REGISTER
- * Bit fields:
- * 27: HW_RF_KILL_SW
- * Indicates state of (platform's) hardware RF-Kill switch
- * 26-24: POWER_SAVE_TYPE
- * Indicates current power-saving mode:
- * 000 -- No power saving
- * 001 -- MAC power-down
- * 010 -- PHY (radio) power-down
- * 011 -- Error
- * 9-6: SYS_CONFIG
- * Indicates current system configuration, reflecting pins on chip
- * as forced high/low by device circuit board.
- * 4: GOING_TO_SLEEP
- * Indicates MAC is entering a power-saving sleep power-down.
- * Not a good time to access device-internal resources.
- * 3: MAC_ACCESS_REQ
- * Host sets this to request and maintain MAC wakeup, to allow host
- * access to device-internal resources. Host must wait for
- * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
- * device registers.
- * 2: INIT_DONE
- * Host sets this to put device into fully operational D0 power mode.
- * Host resets this after SW_RESET to put device into low power mode.
- * 0: MAC_CLOCK_READY
- * Indicates MAC (ucode processor, etc.) is powered up and can run.
- * Internal resources are accessible.
- * NOTE: This does not indicate that the processor is actually running.
- * NOTE: This does not indicate that 4965 or 3945 has completed
- * init or post-power-down restore of internal SRAM memory.
- * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
- * SRAM is restored and uCode is in normal operation mode.
- * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
- * do not need to save/restore it.
- * NOTE: After device reset, this bit remains "0" until host sets
- * INIT_DONE
- */
-#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
-#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
-#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
-#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
-
-#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
-
-#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
-#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000)
-#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)
-
-
-/* EEPROM REG */
-#define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001)
-#define CSR_EEPROM_REG_BIT_CMD (0x00000002)
-#define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC)
-#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
-
-/* EEPROM GP */
-#define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */
-#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
-#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002)
-#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004)
-
-/* GP REG */
-#define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */
-#define CSR_GP_REG_NO_POWER_SAVE (0x00000000)
-#define CSR_GP_REG_MAC_POWER_SAVE (0x01000000)
-#define CSR_GP_REG_PHY_POWER_SAVE (0x02000000)
-#define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000)
-
-
-/* CSR GIO */
-#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)
-
-/*
- * UCODE-DRIVER GP (general purpose) mailbox register 1
- * Host driver and uCode write and/or read this register to communicate with
- * each other.
- * Bit fields:
- * 4: UCODE_DISABLE
- * Host sets this to request permanent halt of uCode, same as
- * sending CARD_STATE command with "halt" bit set.
- * 3: CT_KILL_EXIT
- * Host sets this to request exit from CT_KILL state, i.e. host thinks
- * device temperature is low enough to continue normal operation.
- * 2: CMD_BLOCKED
- * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
- * to release uCode to clear all Tx and command queues, enter
- * unassociated mode, and power down.
- * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit.
- * 1: SW_BIT_RFKILL
- * Host sets this when issuing CARD_STATE command to request
- * device sleep.
- * 0: MAC_SLEEP
- * uCode sets this when preparing a power-saving power-down.
- * uCode resets this when power-up is complete and SRAM is sane.
- * NOTE: 3945/4965 saves internal SRAM data to host when powering down,
- * and must restore this data after powering back up.
- * MAC_SLEEP is the best indication that restore is complete.
- * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
- * do not need to save/restore it.
- */
-#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
-#define CSR_UCODE_SW_BIT_RFKILL (0x00000002)
-#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
-#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
-
-/* GIO Chicken Bits (PCI Express bus link power management) */
-#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
-#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
-
-/* LED */
-#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
-#define CSR_LED_REG_TRUN_ON (0x78)
-#define CSR_LED_REG_TRUN_OFF (0x38)
-
-/* ANA_PLL */
-#define CSR39_ANA_PLL_CFG_VAL (0x01000000)
-
-/* HPET MEM debug */
-#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
-
-/* DRAM INT TBL */
-#define CSR_DRAM_INT_TBL_ENABLE (1 << 31)
-#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
-
-/*
- * HBUS (Host-side Bus)
- *
- * HBUS registers are mapped directly into PCI bus space, but are used
- * to indirectly access device's internal memory or registers that
- * may be powered-down.
- *
- * Use il_wr()/il_rd() family
- * for these registers;
- * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
- * to make sure the MAC (uCode processor, etc.) is powered up for accessing
- * internal resources.
- *
- * Do not use _il_wr()/_il_rd() family to access these registers;
- * these provide only simple PCI bus access, without waking up the MAC.
- */
-#define HBUS_BASE (0x400)
-
-/*
- * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
- * structures, error log, event log, verifying uCode load).
- * First write to address register, then read from or write to data register
- * to complete the job. Once the address register is set up, accesses to
- * data registers auto-increment the address by one dword.
- * Bit usage for address registers (read or write):
- * 0-31: memory address within device
- */
-#define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c)
-#define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010)
-#define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018)
-#define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c)
-
-/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
-#define HBUS_TARG_MBX_C (HBUS_BASE+0x030)
-#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004)
-
-/*
- * Registers for accessing device's internal peripheral registers
- * (e.g. SCD, BSM, etc.). First write to address register,
- * then read from or write to data register to complete the job.
- * Bit usage for address registers (read or write):
- * 0-15: register address (offset) within device
- * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword)
- */
-#define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044)
-#define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048)
-#define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c)
-#define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050)
-
-/*
- * Per-Tx-queue write pointer (idx, really!)
- * Indicates idx to next TFD that driver will fill (1 past latest filled).
- * Bit usage:
- * 0-7: queue write idx
- * 11-8: queue selector
- */
-#define HBUS_TARG_WRPTR (HBUS_BASE+0x060)
-
-#endif /* !__il_csr_h__ */
#include <net/ieee80211_radiotap.h>
#include "iwl-eeprom.h"
-#include "iwl-csr.h"
+#include "csr.h"
#include "iwl-prph.h"
#include "iwl-debug.h"
#include "4965.h"
projects / mirror_ubuntu-eoan-kernel.git / commitdiff