ARM: dts: imx28: add pinmuxing for mmc1

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[ukl: rebase from ancient kernel version]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index a95cc5358ff460cc688d97535bccc8722c9f0358..defb98a5b0450a53a37ed20b1a99c5cd04ab8a54 100644 (file)
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -489,6 +489,38 @@
                                        fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
+                               mmc1_4bit_pins_a: mmc1-4bit@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               MX28_PAD_GPMI_D00__SSP1_D0
+                                               MX28_PAD_GPMI_D01__SSP1_D1
+                                               MX28_PAD_GPMI_D02__SSP1_D2
+                                               MX28_PAD_GPMI_D03__SSP1_D3
+                                               MX28_PAD_GPMI_RDY1__SSP1_CMD
+                                               MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+                                               MX28_PAD_GPMI_WRN__SSP1_SCK
+                                       >;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
+                               };
+
+                               mmc1_cd_cfg: mmc1-cd-cfg {
+                                       fsl,pinmux-ids = <
+                                               MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+                                       >;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
+                               };
+
+                               mmc1_sck_cfg: mmc1-sck-cfg {
+                                       fsl,pinmux-ids = <
+                                               MX28_PAD_GPMI_WRN__SSP1_SCK
+                                       >;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
+                               };
+
+
                                mmc2_4bit_pins_a: mmc2-4bit@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <