V4L/DVB (9918): cx88: advise/acquire clean-up for HVR-1300/3000/4000

This cleans-up the advise/acquire methods.

This has been tested on the hvr-1300/4000 and assumed to be
correct on the hvr-3000.

This update also fixes analogue tuning on the hvr-1300
when in blackbird mode.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index ca067ec250afb8800242543220b8ebd3ef880dd9..e162a70748c5fa6458655daf8591f94b2d3fff63 100644 (file)
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1244,8 +1244,16 @@ static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv)
                 * We're being given access to re-arrange the GPIOs.
                 * Take the bus off the cx22702 and put the cx23416 on it.
                 */
-               cx_clear(MO_GP0_IO, 0x00000080); /* cx22702 in reset */
-               cx_set(MO_GP0_IO,   0x00000004); /* Disable the cx22702 */
+               /* Toggle reset on cx22702 leaving i2c active */
+               cx_set(MO_GP0_IO, 0x00000080);
+               udelay(1000);
+               cx_clear(MO_GP0_IO, 0x00000080);
+               udelay(50);
+               cx_set(MO_GP0_IO, 0x00000080);
+               udelay(1000);
+               /* tri-state the cx22702 pins */
+               cx_set(MO_GP0_IO, 0x00000004);
+               udelay(1000);
                break;
        default:
                err = -ENODEV;

diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index e5bbc7b37c39fb82e9eee1792dd38c0faf2c9631..da4dd4913d9f7cc3fbd31d64f20ee5e9bdb56ed7 100644 (file)
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -1128,40 +1128,44 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
                 * on the bus. Take the bus from the cx23416 and enable the
                 * cx22702 demod
                 */
-               cx_set(MO_GP0_IO,   0x00000080); /* cx22702 out of reset and enable */
+               /* Toggle reset on cx22702 leaving i2c active */
+               cx_set(MO_GP0_IO, 0x00000080);
+               udelay(1000);
+               cx_clear(MO_GP0_IO, 0x00000080);
+               udelay(50);
+               cx_set(MO_GP0_IO, 0x00000080);
+               udelay(1000);
+               /* enable the cx22702 pins */
                cx_clear(MO_GP0_IO, 0x00000004);
                udelay(1000);
                break;
 
        case CX88_BOARD_HAUPPAUGE_HVR3000:
        case CX88_BOARD_HAUPPAUGE_HVR4000:
-               if(core->dvbdev->frontends.active_fe_id == 1) {
-                       /* DVB-S/S2 Enabled */
-
-                       /* Toggle reset on cx22702 leaving i2c active */
-                       cx_write(MO_GP0_IO, (core->board.input[0].gpio0 & 0x0000ff00) | 0x00000080);
-                       udelay(1000);
-                       cx_clear(MO_GP0_IO, 0x00000080);
-                       udelay(50);
-                       cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
-                       cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
-                       udelay(1000);
-
-                       cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
+               /* Toggle reset on cx22702 leaving i2c active */
+               cx_set(MO_GP0_IO, 0x00000080);
+               udelay(1000);
+               cx_clear(MO_GP0_IO, 0x00000080);
+               udelay(50);
+               cx_set(MO_GP0_IO, 0x00000080);
+               udelay(1000);
+               switch (core->dvbdev->frontends.active_fe_id) {
+               case 1: /* DVB-S/S2 Enabled */
+                       /* tri-state the cx22702 pins */
+                       cx_set(MO_GP0_IO, 0x00000004);
+                       /* Take the cx24116/cx24123 out of reset */
+                       cx_write(MO_SRST_IO, 1);
                        core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
-               } else
-               if (core->dvbdev->frontends.active_fe_id == 2) {
-                       /* DVB-T Enabled */
-
+                       break;
+               case 2: /* DVB-T Enabled */
                        /* Put the cx24116/cx24123 into reset */
                        cx_write(MO_SRST_IO, 0);
-
-                       /* cx22702 out of reset and enable it */
-                       cx_set(MO_GP0_IO,   0x00000080);
+                       /* enable the cx22702 pins */
                        cx_clear(MO_GP0_IO, 0x00000004);
                        core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
-                       udelay(1000);
+                       break;
                }
+               udelay(1000);
                break;
 
        default: