*/
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
#include <drm/drm_panel.h>
#include <linux/clk.h>
#include <linux/component.h>
struct drm_encoder *encoder;
struct drm_connector *connector;
- struct drm_panel *panel;
+ struct drm_bridge *bridge;
+ bool is_panel_bridge;
void __iomem *regs;
return container_of(encoder, struct vc4_dpi_encoder, base.base);
}
-/* VC4 DPI connector KMS struct */
-struct vc4_dpi_connector {
- struct drm_connector base;
- struct vc4_dpi *dpi;
-
- /* Since the connector is attached to just the one encoder,
- * this is the reference to it so we can do the best_encoder()
- * hook.
- */
- struct drm_encoder *encoder;
-};
-
-static inline struct vc4_dpi_connector *
-to_vc4_dpi_connector(struct drm_connector *connector)
-{
- return container_of(connector, struct vc4_dpi_connector, base);
-}
-
#define DPI_REG(reg) { reg, #reg }
static const struct {
u32 reg;
}
#endif
-static enum drm_connector_status
-vc4_dpi_connector_detect(struct drm_connector *connector, bool force)
-{
- struct vc4_dpi_connector *vc4_connector =
- to_vc4_dpi_connector(connector);
- struct vc4_dpi *dpi = vc4_connector->dpi;
-
- if (dpi->panel)
- return connector_status_connected;
- else
- return connector_status_disconnected;
-}
-
-static void vc4_dpi_connector_destroy(struct drm_connector *connector)
-{
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
-}
-
-static int vc4_dpi_connector_get_modes(struct drm_connector *connector)
-{
- struct vc4_dpi_connector *vc4_connector =
- to_vc4_dpi_connector(connector);
- struct vc4_dpi *dpi = vc4_connector->dpi;
-
- if (dpi->panel)
- return drm_panel_get_modes(dpi->panel);
-
- return 0;
-}
-
-static const struct drm_connector_funcs vc4_dpi_connector_funcs = {
- .dpms = drm_atomic_helper_connector_dpms,
- .detect = vc4_dpi_connector_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = vc4_dpi_connector_destroy,
- .reset = drm_atomic_helper_connector_reset,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static const struct drm_connector_helper_funcs vc4_dpi_connector_helper_funcs = {
- .get_modes = vc4_dpi_connector_get_modes,
-};
-
-static struct drm_connector *vc4_dpi_connector_init(struct drm_device *dev,
- struct vc4_dpi *dpi)
-{
- struct drm_connector *connector = NULL;
- struct vc4_dpi_connector *dpi_connector;
-
- dpi_connector = devm_kzalloc(dev->dev, sizeof(*dpi_connector),
- GFP_KERNEL);
- if (!dpi_connector)
- return ERR_PTR(-ENOMEM);
-
- connector = &dpi_connector->base;
-
- dpi_connector->encoder = dpi->encoder;
- dpi_connector->dpi = dpi;
-
- drm_connector_init(dev, connector, &vc4_dpi_connector_funcs,
- DRM_MODE_CONNECTOR_DPI);
- drm_connector_helper_add(connector, &vc4_dpi_connector_helper_funcs);
-
- connector->polled = 0;
- connector->interlace_allowed = 0;
- connector->doublescan_allowed = 0;
-
- drm_mode_connector_attach_encoder(connector, dpi->encoder);
-
- return connector;
-}
-
static const struct drm_encoder_funcs vc4_dpi_encoder_funcs = {
.destroy = drm_encoder_cleanup,
};
struct vc4_dpi_encoder *vc4_encoder = to_vc4_dpi_encoder(encoder);
struct vc4_dpi *dpi = vc4_encoder->dpi;
- drm_panel_disable(dpi->panel);
-
clk_disable_unprepare(dpi->pixel_clock);
-
- drm_panel_unprepare(dpi->panel);
}
static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
u32 dpi_c = DPI_ENABLE | DPI_OUTPUT_ENABLE_MODE;
int ret;
- ret = drm_panel_prepare(dpi->panel);
- if (ret) {
- DRM_ERROR("Panel failed to prepare\n");
- return;
- }
-
if (dpi->connector->display_info.num_bus_formats) {
u32 bus_format = dpi->connector->display_info.bus_formats[0];
ret = clk_prepare_enable(dpi->pixel_clock);
if (ret)
DRM_ERROR("Failed to set clock rate: %d\n", ret);
-
- ret = drm_panel_enable(dpi->panel);
- if (ret) {
- DRM_ERROR("Panel failed to enable\n");
- drm_panel_unprepare(dpi->panel);
- return;
- }
}
static bool vc4_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
{}
};
-/* Walks the OF graph to find the panel node and then asks DRM to look
- * up the panel.
+/* Sets up the next link in the display chain, whether it's a panel or
+ * a bridge.
*/
-static struct drm_panel *vc4_dpi_get_panel(struct device *dev)
+static int vc4_dpi_init_bridge(struct vc4_dpi *dpi)
{
- struct device_node *panel_node;
- struct device_node *np = dev->of_node;
+ struct device *dev = &dpi->pdev->dev;
struct drm_panel *panel;
+ int ret;
- /* don't proceed if we have an endpoint but no panel_node tied to it */
- panel_node = of_graph_get_remote_node(np, 0, 0);
- if (!panel_node)
- return NULL;
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+ &panel, &dpi->bridge);
+ if (ret) {
+ /* If nothing was connected in the DT, that's not an
+ * error.
+ */
+ if (ret == -ENODEV)
+ return 0;
+ else
+ return ret;
+ }
- panel = of_drm_find_panel(panel_node);
- of_node_put(panel_node);
+ if (panel) {
+ dpi->bridge = drm_panel_bridge_add(panel,
+ DRM_MODE_CONNECTOR_DPI);
+ dpi->is_panel_bridge = true;
+ }
- return panel;
+ return drm_bridge_attach(dpi->encoder, dpi->bridge, NULL);
}
static int vc4_dpi_bind(struct device *dev, struct device *master, void *data)
if (ret)
DRM_ERROR("Failed to turn on core clock: %d\n", ret);
- dpi->panel = vc4_dpi_get_panel(dev);
-
drm_encoder_init(drm, dpi->encoder, &vc4_dpi_encoder_funcs,
DRM_MODE_ENCODER_DPI, NULL);
drm_encoder_helper_add(dpi->encoder, &vc4_dpi_encoder_helper_funcs);
- dpi->connector = vc4_dpi_connector_init(drm, dpi);
- if (IS_ERR(dpi->connector)) {
- ret = PTR_ERR(dpi->connector);
+ ret = vc4_dpi_init_bridge(dpi);
+ if (ret)
goto err_destroy_encoder;
- }
-
- if (dpi->panel)
- drm_panel_attach(dpi->panel, dpi->connector);
dev_set_drvdata(dev, dpi);
struct vc4_dev *vc4 = to_vc4_dev(drm);
struct vc4_dpi *dpi = dev_get_drvdata(dev);
- if (dpi->panel)
- drm_panel_detach(dpi->panel);
+ if (dpi->is_panel_bridge)
+ drm_panel_bridge_remove(dpi->bridge);
- vc4_dpi_connector_destroy(dpi->connector);
drm_encoder_cleanup(dpi->encoder);
clk_disable_unprepare(dpi->core_clock);