*
* Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
* Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
*
* This software is distributed under the terms of the GNU General
* Public License ("GPL") as published by the Free Software Foundation,
/* Defines */
-#define GS_VERSION_STR "v2.3"
-#define GS_VERSION_NUM 0x2300
+#define GS_VERSION_STR "v2.4"
+#define GS_VERSION_NUM 0x2400
#define GS_LONG_NAME "Gadget Serial"
-#define GS_SHORT_NAME "g_serial"
-
#define GS_VERSION_NAME GS_LONG_NAME " " GS_VERSION_STR
-
-/* REVISIT only one port is supported for now;
- * see gs_{send,recv}_packet() ... no multiplexing,
- * and no support for multiple ACM devices.
- */
-#define GS_NUM_PORTS 1
-
-#define GS_NUM_CONFIGS 1
-#define GS_NO_CONFIG_ID 0
-#define GS_BULK_CONFIG_ID 1
-#define GS_ACM_CONFIG_ID 2
-
-#define GS_MAX_NUM_INTERFACES 2
-#define GS_BULK_INTERFACE_ID 0
-#define GS_CONTROL_INTERFACE_ID 0
-#define GS_DATA_INTERFACE_ID 1
-
-#define GS_MAX_DESC_LEN 256
-
-#define GS_DEFAULT_USE_ACM 0
-
-
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *
-choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
-
+/*-------------------------------------------------------------------------*/
/* Thanks to NetChip Technologies for donating this product ID.
- *
- * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
- * Instead: allocate your own, using normal USB-IF procedures.
- */
+*
+* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+* Instead: allocate your own, using normal USB-IF procedures.
+*/
#define GS_VENDOR_ID 0x0525 /* NetChip */
#define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */
#define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */
-#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
-#define GS_NOTIFY_MAXPACKET 8
+/* string IDs are assigned dynamically */
-/* the device structure holds info for the USB device */
-struct gs_dev {
- struct usb_gadget *dev_gadget; /* gadget device pointer */
- spinlock_t dev_lock; /* lock for set/reset config */
- int dev_config; /* configuration number */
- struct usb_request *dev_ctrl_req; /* control request */
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+#define STRING_DESCRIPTION_IDX 2
- struct gserial gser; /* serial/tty port */
-};
-
-
-/* Functions */
-
-/* gadget driver internals */
-static int gs_set_config(struct gs_dev *dev, unsigned config);
-static void gs_reset_config(struct gs_dev *dev);
-static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
- u8 type, unsigned int index, int is_otg);
-
-static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
- gfp_t kmalloc_flags);
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
-
-/*-------------------------------------------------------------------------*/
-
-/* USB descriptors */
-
-#define GS_MANUFACTURER_STR_ID 1
-#define GS_PRODUCT_STR_ID 2
-#define GS_SERIAL_STR_ID 3
-#define GS_BULK_CONFIG_STR_ID 4
-#define GS_ACM_CONFIG_STR_ID 5
-#define GS_CONTROL_STR_ID 6
-#define GS_DATA_STR_ID 7
-
-/* static strings, in UTF-8 */
static char manufacturer[50];
-static struct usb_string gs_strings[] = {
- { GS_MANUFACTURER_STR_ID, manufacturer },
- { GS_PRODUCT_STR_ID, GS_VERSION_NAME },
- { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
- { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
- { GS_CONTROL_STR_ID, "Gadget Serial Control" },
- { GS_DATA_STR_ID, "Gadget Serial Data" },
+
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = GS_VERSION_NAME,
+ [STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
{ } /* end of list */
};
-static struct usb_gadget_strings gs_string_table = {
- .language = 0x0409, /* en-us */
- .strings = gs_strings,
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
};
-static struct usb_device_descriptor gs_device_desc = {
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
+
+static struct usb_device_descriptor device_desc = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = __constant_cpu_to_le16(0x0200),
+ /* .bDeviceClass = f(use_acm) */
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
.idVendor = __constant_cpu_to_le16(GS_VENDOR_ID),
- .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID),
- .iManufacturer = GS_MANUFACTURER_STR_ID,
- .iProduct = GS_PRODUCT_STR_ID,
- .bNumConfigurations = GS_NUM_CONFIGS,
+ /* .idProduct = f(use_acm) */
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ .bNumConfigurations = 1,
};
-static struct usb_otg_descriptor gs_otg_descriptor = {
- .bLength = sizeof(gs_otg_descriptor),
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- .bmAttributes = USB_OTG_SRP,
-};
-static struct usb_config_descriptor gs_bulk_config_desc = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- /* .wTotalLength computed dynamically */
- .bNumInterfaces = 1,
- .bConfigurationValue = GS_BULK_CONFIG_ID,
- .iConfiguration = GS_BULK_CONFIG_STR_ID,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1,
-};
-
-static struct usb_config_descriptor gs_acm_config_desc = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- /* .wTotalLength computed dynamically */
- .bNumInterfaces = 2,
- .bConfigurationValue = GS_ACM_CONFIG_ID,
- .iConfiguration = GS_ACM_CONFIG_STR_ID,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1,
-};
-
-static const struct usb_interface_descriptor gs_bulk_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_BULK_INTERFACE_ID,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = GS_DATA_STR_ID,
-};
-
-static const struct usb_interface_descriptor gs_control_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
- .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
- .iInterface = GS_CONTROL_STR_ID,
-};
-
-static const struct usb_interface_descriptor gs_data_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_DATA_INTERFACE_ID,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = GS_DATA_STR_ID,
-};
-
-static const struct usb_cdc_header_desc gs_header_desc = {
- .bLength = sizeof(gs_header_desc),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_HEADER_TYPE,
- .bcdCDC = __constant_cpu_to_le16(0x0110),
-};
-
-static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
- .bLength = sizeof(gs_call_mgmt_descriptor),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
- .bmCapabilities = 0,
- .bDataInterface = 1, /* index of data interface */
-};
-
-static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
- .bLength = sizeof(gs_acm_descriptor),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ACM_TYPE,
- .bmCapabilities = (1 << 1),
-};
-
-static const struct usb_cdc_union_desc gs_union_desc = {
- .bLength = sizeof(gs_union_desc),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_UNION_TYPE,
- .bMasterInterface0 = 0, /* index of control interface */
- .bSlaveInterface0 = 1, /* index of data interface */
-};
-
-static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
-};
-
-static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_bulk_interface_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
- NULL,
-};
-
-static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_control_interface_desc,
- (struct usb_descriptor_header *) &gs_header_desc,
- (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
- (struct usb_descriptor_header *) &gs_acm_descriptor,
- (struct usb_descriptor_header *) &gs_union_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
- (struct usb_descriptor_header *) &gs_data_interface_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
- NULL,
-};
-
-static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
-};
-
-static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_qualifier_descriptor gs_qualifier_desc = {
- .bLength = sizeof(struct usb_qualifier_descriptor),
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
- /* assumes ep0 uses the same value for both speeds ... */
- .bNumConfigurations = GS_NUM_CONFIGS,
-};
-
-static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_bulk_interface_desc,
- (struct usb_descriptor_header *) &gs_highspeed_in_desc,
- (struct usb_descriptor_header *) &gs_highspeed_out_desc,
- NULL,
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_control_interface_desc,
- (struct usb_descriptor_header *) &gs_header_desc,
- (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
- (struct usb_descriptor_header *) &gs_acm_descriptor,
- (struct usb_descriptor_header *) &gs_union_desc,
- (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
- (struct usb_descriptor_header *) &gs_data_interface_desc,
- (struct usb_descriptor_header *) &gs_highspeed_in_desc,
- (struct usb_descriptor_header *) &gs_highspeed_out_desc,
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
NULL,
};
-
/*-------------------------------------------------------------------------*/
/* Module */
MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-static unsigned int use_acm = GS_DEFAULT_USE_ACM;
-module_param(use_acm, uint, S_IRUGO);
-MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
+static int use_acm = true;
+module_param(use_acm, bool, 0);
+MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes");
-/*-------------------------------------------------------------------------*/
+static unsigned n_ports = 1;
+module_param(n_ports, uint, 0);
+MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
-/* Gadget Driver */
+/*-------------------------------------------------------------------------*/
-/*
- * gs_unbind
- *
- * Called on module unload. Frees the control request and device
- * structure.
- */
-static void __exit gs_unbind(struct usb_gadget *gadget)
+static int __init serial_bind_config(struct usb_configuration *c)
{
- struct gs_dev *dev = get_gadget_data(gadget);
+ unsigned i;
+ int status = 0;
- /* read/write requests already freed, only control request remains */
- if (dev != NULL) {
- if (dev->dev_ctrl_req != NULL) {
- gs_free_req(gadget->ep0, dev->dev_ctrl_req);
- dev->dev_ctrl_req = NULL;
- }
- gs_reset_config(dev);
- kfree(dev);
- set_gadget_data(gadget, NULL);
+ for (i = 0; i < n_ports && status == 0; i++) {
+ if (use_acm)
+ status = acm_bind_config(c, i);
+ else
+ status = gser_bind_config(c, i);
}
-
- pr_info("gs_unbind: %s unbound\n", GS_VERSION_NAME);
-
- gserial_cleanup();
+ return status;
}
-/*
- * gs_bind
- *
- * Called on module load. Allocates and initializes the device
- * structure and a control request.
- */
-static int __init gs_bind(struct usb_gadget *gadget)
+static struct usb_configuration serial_config_driver = {
+ /* .label = f(use_acm) */
+ .bind = serial_bind_config,
+ /* .bConfigurationValue = f(use_acm) */
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+};
+
+static int __init gs_bind(struct usb_composite_dev *cdev)
{
- int ret;
- struct usb_ep *ep;
- struct gs_dev *dev;
- int gcnum;
+ int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int status;
- ret = gserial_setup(gadget, GS_NUM_PORTS);
- if (ret < 0)
- return ret;
+ status = gserial_setup(cdev->gadget, n_ports);
+ if (status < 0)
+ return status;
- /* Some controllers can't support CDC ACM:
- * - sh doesn't support multiple interfaces or configs;
- * - sa1100 doesn't have a third interrupt endpoint
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
*/
- if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
- use_acm = 0;
-
- gcnum = usb_gadget_controller_number(gadget);
- if (gcnum >= 0)
- gs_device_desc.bcdDevice =
- cpu_to_le16(GS_VERSION_NUM | gcnum);
- else {
- pr_warning("gs_bind: controller '%s' not recognized\n",
- gadget->name);
- /* unrecognized, but safe unless bulk is REALLY quirky */
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
- }
-
- dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
- if (dev == NULL) {
- ret = -ENOMEM;
- goto autoconf_fail;
- }
-
- usb_ep_autoconfig_reset(gadget);
- ret = -ENXIO;
-
- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
- if (!ep)
- goto autoconf_fail;
- dev->gser.in = ep;
- ep->driver_data = dev; /* claim the endpoint */
-
- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
- if (!ep)
- goto autoconf_fail;
- dev->gser.out = ep;
- ep->driver_data = dev; /* claim the endpoint */
-
- if (use_acm) {
- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
- if (!ep) {
- pr_err("gs_bind: cannot run ACM on %s\n", gadget->name);
- goto autoconf_fail;
- }
- gs_device_desc.idProduct = __constant_cpu_to_le16(
- GS_CDC_PRODUCT_ID),
- dev->gser.notify = ep;
- ep->driver_data = dev; /* claim the endpoint */
- }
-
- gs_device_desc.bDeviceClass = use_acm
- ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
- gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-
- if (gadget_is_dualspeed(gadget)) {
- gs_qualifier_desc.bDeviceClass = use_acm
- ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
- /* assume ep0 uses the same packet size for both speeds */
- gs_qualifier_desc.bMaxPacketSize0 =
- gs_device_desc.bMaxPacketSize0;
- /* assume endpoints are dual-speed */
- gs_highspeed_notify_desc.bEndpointAddress =
- gs_fullspeed_notify_desc.bEndpointAddress;
- gs_highspeed_in_desc.bEndpointAddress =
- gs_fullspeed_in_desc.bEndpointAddress;
- gs_highspeed_out_desc.bEndpointAddress =
- gs_fullspeed_out_desc.bEndpointAddress;
- }
-
- usb_gadget_set_selfpowered(gadget);
-
- if (gadget_is_otg(gadget)) {
- gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
- gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
- snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
+ /* device description: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
- dev->dev_gadget = gadget;
- spin_lock_init(&dev->dev_lock);
- set_gadget_data(gadget, dev);
-
- /* preallocate control response and buffer */
- dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
- GFP_KERNEL);
- if (dev->dev_ctrl_req == NULL) {
- ret = -ENOMEM;
- goto autoconf_fail;
- }
- gadget->ep0->driver_data = dev;
-
- pr_info("gs_bind: %s bound\n", GS_VERSION_NAME);
-
- return 0;
-
-autoconf_fail:
- kfree(dev);
- gserial_cleanup();
- pr_err("gs_bind: to %s, err %d\n", gadget->name, ret);
- return ret;
-}
-
-static int gs_setup_standard(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- switch (ctrl->bRequest) {
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
-
- switch (wValue >> 8) {
- case USB_DT_DEVICE:
- ret = min(wLength,
- (u16)sizeof(struct usb_device_descriptor));
- memcpy(req->buf, &gs_device_desc, ret);
- break;
-
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
- break;
- ret = min(wLength,
- (u16)sizeof(struct usb_qualifier_descriptor));
- memcpy(req->buf, &gs_qualifier_desc, ret);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
- break;
- /* fall through */
- case USB_DT_CONFIG:
- ret = gs_build_config_buf(req->buf, gadget,
- wValue >> 8, wValue & 0xff,
- gadget_is_otg(gadget));
- if (ret >= 0)
- ret = min(wLength, (u16)ret);
- break;
-
- case USB_DT_STRING:
- /* wIndex == language code. */
- ret = usb_gadget_get_string(&gs_string_table,
- wValue & 0xff, req->buf);
- if (ret >= 0)
- ret = min(wLength, (u16)ret);
- break;
- }
- break;
+ device_desc.iManufacturer = status;
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- break;
- spin_lock(&dev->dev_lock);
- ret = gs_set_config(dev, wValue);
- spin_unlock(&dev->dev_lock);
- break;
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
- *(u8 *)req->buf = dev->dev_config;
- ret = min(wLength, (u16)1);
- break;
+ device_desc.iProduct = status;
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != USB_RECIP_INTERFACE
- || !dev->dev_config
- || wIndex >= GS_MAX_NUM_INTERFACES)
- break;
- if (dev->dev_config == GS_BULK_CONFIG_ID
- && wIndex != GS_BULK_INTERFACE_ID)
- break;
- /* no alternate interface settings */
- if (wValue != 0)
- break;
- spin_lock(&dev->dev_lock);
- /* PXA hardware partially handles SET_INTERFACE;
- * we need to kluge around that interference. */
- if (gadget_is_pxa(gadget)) {
- ret = gs_set_config(dev, use_acm ?
- GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
- goto set_interface_done;
- }
- if (dev->dev_config != GS_BULK_CONFIG_ID
- && wIndex == GS_CONTROL_INTERFACE_ID) {
- if (dev->gser.notify) {
- usb_ep_disable(dev->gser.notify);
- usb_ep_enable(dev->gser.notify,
- dev->gser.notify_desc);
- }
- } else {
- gserial_connect(&dev->gser, 0);
- gserial_disconnect(&dev->gser);
- }
- ret = 0;
-set_interface_done:
- spin_unlock(&dev->dev_lock);
- break;
+ /* config description */
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_DESCRIPTION_IDX].id = status;
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
- || dev->dev_config == GS_NO_CONFIG_ID)
- break;
- if (wIndex >= GS_MAX_NUM_INTERFACES
- || (dev->dev_config == GS_BULK_CONFIG_ID
- && wIndex != GS_BULK_INTERFACE_ID)) {
- ret = -EDOM;
- break;
- }
- /* no alternate interface settings */
- *(u8 *)req->buf = 0;
- ret = min(wLength, (u16)1);
- break;
+ serial_config_driver.iConfiguration = status;
- default:
- pr_err("gs_setup: unknown standard request, type=%02x, "
- "request=%02x, value=%04x, index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
- }
-
- return ret;
-}
-
-static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
- struct usb_request *req)
-{
- struct gs_dev *dev = ep->driver_data;
-
- switch (req->status) {
- case 0:
- /* normal completion */
- if (req->actual != sizeof(dev->gser.port_line_coding))
- usb_ep_set_halt(ep);
- else {
- struct usb_cdc_line_coding *value = req->buf;
-
- /* REVISIT: we currently just remember this data.
- * If we change that, (a) validate it first, then
- * (b) update whatever hardware needs updating.
- */
- spin_lock(&dev->dev_lock);
- dev->gser.port_line_coding = *value;
- spin_unlock(&dev->dev_lock);
- }
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_free_req(ep, req);
- break;
-
- default:
- /* unexpected */
- break;
- }
- return;
-}
-
-static int gs_setup_class(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- switch (ctrl->bRequest) {
- case USB_CDC_REQ_SET_LINE_CODING:
- if (wLength != sizeof(struct usb_cdc_line_coding))
- break;
- ret = wLength;
- req->complete = gs_setup_complete_set_line_coding;
- break;
-
- case USB_CDC_REQ_GET_LINE_CODING:
- ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
- spin_lock(&dev->dev_lock);
- memcpy(req->buf, &dev->gser.port_line_coding, ret);
- spin_unlock(&dev->dev_lock);
- break;
-
- case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
- if (wLength != 0)
- break;
- ret = 0;
- /* REVISIT: we currently just remember this data.
- * If we change that, update whatever hardware needs
- * updating.
- */
- spin_lock(&dev->dev_lock);
- dev->gser.port_handshake_bits = wValue;
- spin_unlock(&dev->dev_lock);
- break;
-
- default:
- /* NOTE: strictly speaking, we should accept AT-commands
- * using SEND_ENCPSULATED_COMMAND/GET_ENCAPSULATED_RESPONSE.
- * But our call management descriptor says we don't handle
- * call management, so we should be able to get by without
- * handling those "required" commands (except by stalling).
+ /* set up other descriptors */
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum);
+ else {
+ /* this is so simple (for now, no altsettings) that it
+ * SHOULD NOT have problems with bulk-capable hardware.
+ * so warn about unrcognized controllers -- don't panic.
+ *
+ * things like configuration and altsetting numbering
+ * can need hardware-specific attention though.
*/
- pr_err("gs_setup: unknown class request, "
- "type=%02x, request=%02x, value=%04x, "
- "index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
- }
-
- return ret;
-}
-
-/*
- * gs_setup_complete
- */
-static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length) {
- pr_err("gs_setup_complete: status error, status=%d, "
- "actual=%d, length=%d\n",
- req->status, req->actual, req->length);
- }
-}
-
-/*
- * gs_setup
- *
- * Implements all the control endpoint functionality that's not
- * handled in hardware or the hardware driver.
- *
- * Returns the size of the data sent to the host, or a negative
- * error number.
- */
-static int gs_setup(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- req->complete = gs_setup_complete;
-
- switch (ctrl->bRequestType & USB_TYPE_MASK) {
- case USB_TYPE_STANDARD:
- ret = gs_setup_standard(gadget, ctrl);
- break;
-
- case USB_TYPE_CLASS:
- ret = gs_setup_class(gadget, ctrl);
- break;
-
- default:
- pr_err("gs_setup: unknown request, type=%02x, request=%02x, "
- "value=%04x, index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
+ pr_warning("gs_bind: controller '%s' not recognized\n",
+ gadget->name);
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM | 0x0099);
}
- /* respond with data transfer before status phase? */
- if (ret >= 0) {
- req->length = ret;
- req->zero = ret < wLength
- && (ret % gadget->ep0->maxpacket) == 0;
- ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
- if (ret < 0) {
- pr_err("gs_setup: cannot queue response, ret=%d\n",
- ret);
- req->status = 0;
- gs_setup_complete(gadget->ep0, req);
- }
+ if (gadget_is_otg(cdev->gadget)) {
+ serial_config_driver.descriptors = otg_desc;
+ serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- /* device either stalls (ret < 0) or reports success */
- return ret;
-}
+ /* register our configuration */
+ status = usb_add_config(cdev, &serial_config_driver);
+ if (status < 0)
+ goto fail;
-/*
- * gs_disconnect
- *
- * Called when the device is disconnected. Frees the closed
- * ports and disconnects open ports. Open ports will be freed
- * on close. Then reallocates the ports for the next connection.
- */
-static void gs_disconnect(struct usb_gadget *gadget)
-{
- unsigned long flags;
- struct gs_dev *dev = get_gadget_data(gadget);
+ INFO(cdev, "%s\n", GS_VERSION_NAME);
- spin_lock_irqsave(&dev->dev_lock, flags);
- gs_reset_config(dev);
- spin_unlock_irqrestore(&dev->dev_lock, flags);
+ return 0;
- pr_info("gs_disconnect: %s disconnected\n", GS_LONG_NAME);
+fail:
+ gserial_cleanup();
+ return status;
}
-static struct usb_gadget_driver gs_gadget_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
- .function = GS_LONG_NAME,
- .bind = gs_bind,
- .unbind = gs_unbind,
- .setup = gs_setup,
- .disconnect = gs_disconnect,
- .driver = {
- .name = GS_SHORT_NAME,
- .owner = THIS_MODULE,
- },
+static struct usb_composite_driver gserial_driver = {
+ .name = "g_serial",
+ .dev = &device_desc,
+ .strings = dev_strings,
+ .bind = gs_bind,
};
-/*
- * gs_set_config
- *
- * Configures the device by enabling device specific
- * optimizations, setting up the endpoints, allocating
- * read and write requests and queuing read requests.
- *
- * The device lock must be held when calling this function.
- */
-static int gs_set_config(struct gs_dev *dev, unsigned config)
+static int __init init(void)
{
- int ret = 0;
- struct usb_gadget *gadget = dev->dev_gadget;
-
- if (config == dev->dev_config)
- return 0;
-
- gs_reset_config(dev);
-
- switch (config) {
- case GS_NO_CONFIG_ID:
- return 0;
- case GS_BULK_CONFIG_ID:
- if (use_acm)
- return -EINVAL;
- break;
- case GS_ACM_CONFIG_ID:
- if (!use_acm)
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- dev->gser.in_desc = choose_ep_desc(gadget,
- &gs_highspeed_in_desc,
- &gs_fullspeed_in_desc);
- dev->gser.out_desc = choose_ep_desc(gadget,
- &gs_highspeed_out_desc,
- &gs_fullspeed_out_desc);
- dev->gser.notify_desc = dev->gser.notify
- ? choose_ep_desc(gadget,
- &gs_highspeed_notify_desc,
- &gs_fullspeed_notify_desc)
- : NULL;
-
- /* only support one "serial" port for now */
- if (dev->gser.notify) {
- ret = usb_ep_enable(dev->gser.notify, dev->gser.notify_desc);
- if (ret < 0)
- return ret;
- dev->gser.notify->driver_data = dev;
- }
-
- ret = gserial_connect(&dev->gser, 0);
- if (ret < 0) {
- if (dev->gser.notify) {
- usb_ep_disable(dev->gser.notify);
- dev->gser.notify->driver_data = NULL;
- }
- return ret;
- }
-
- dev->dev_config = config;
-
- /* REVISIT the ACM mode should be able to actually *issue* some
- * notifications, for at least serial state change events if
- * not also for network connection; say so in bmCapabilities.
+ /* We *could* export two configs; that'd be much cleaner...
+ * but neither of these product IDs was defined that way.
*/
-
- pr_info("gs_set_config: %s configured, %s speed %s config\n",
- GS_LONG_NAME,
- gadget->speed == USB_SPEED_HIGH ? "high" : "full",
- config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
-
- return 0;
-}
-
-/*
- * gs_reset_config
- *
- * Mark the device as not configured, disable all endpoints,
- * which forces completion of pending I/O and frees queued
- * requests, and free the remaining write requests on the
- * free list.
- *
- * The device lock must be held when calling this function.
- */
-static void gs_reset_config(struct gs_dev *dev)
-{
- if (dev->dev_config == GS_NO_CONFIG_ID)
- return;
-
- dev->dev_config = GS_NO_CONFIG_ID;
-
- gserial_disconnect(&dev->gser);
- if (dev->gser.notify) {
- usb_ep_disable(dev->gser.notify);
- dev->gser.notify->driver_data = NULL;
- }
-}
-
-/*
- * gs_build_config_buf
- *
- * Builds the config descriptors in the given buffer and returns the
- * length, or a negative error number.
- */
-static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
- u8 type, unsigned int index, int is_otg)
-{
- int len;
- int high_speed = 0;
- const struct usb_config_descriptor *config_desc;
- const struct usb_descriptor_header **function;
-
- if (index >= gs_device_desc.bNumConfigurations)
- return -EINVAL;
-
- /* other speed switches high and full speed */
- if (gadget_is_dualspeed(g)) {
- high_speed = (g->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- high_speed = !high_speed;
- }
-
if (use_acm) {
- config_desc = &gs_acm_config_desc;
- function = high_speed
- ? gs_acm_highspeed_function
- : gs_acm_fullspeed_function;
+ serial_config_driver.label = "CDC ACM config";
+ serial_config_driver.bConfigurationValue = 2;
+ device_desc.bDeviceClass = USB_CLASS_COMM;
+ device_desc.idProduct =
+ __constant_cpu_to_le16(GS_CDC_PRODUCT_ID);
} else {
- config_desc = &gs_bulk_config_desc;
- function = high_speed
- ? gs_bulk_highspeed_function
- : gs_bulk_fullspeed_function;
- }
-
- /* for now, don't advertise srp-only devices */
- if (!is_otg)
- function++;
-
- len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
- if (len < 0)
- return len;
-
- ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
-
- return len;
-}
-
-/*
- * gs_alloc_req
- *
- * Allocate a usb_request and its buffer. Returns a pointer to the
- * usb_request or NULL if there is an error.
- */
-static struct usb_request *
-gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
-{
- struct usb_request *req;
-
- if (ep == NULL)
- return NULL;
-
- req = usb_ep_alloc_request(ep, kmalloc_flags);
-
- if (req != NULL) {
- req->length = len;
- req->buf = kmalloc(len, kmalloc_flags);
- if (req->buf == NULL) {
- usb_ep_free_request(ep, req);
- return NULL;
- }
- }
-
- return req;
-}
-
-/*
- * gs_free_req
- *
- * Free a usb_request and its buffer.
- */
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
-{
- if (ep != NULL && req != NULL) {
- kfree(req->buf);
- usb_ep_free_request(ep, req);
+ serial_config_driver.label = "Generic Serial config";
+ serial_config_driver.bConfigurationValue = 1;
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idProduct =
+ __constant_cpu_to_le16(GS_PRODUCT_ID);
}
-}
-
-/*-------------------------------------------------------------------------*/
+ strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
-/*
- * gs_module_init
- *
- * Register as a USB gadget driver and a tty driver.
- */
-static int __init gs_module_init(void)
-{
- return usb_gadget_register_driver(&gs_gadget_driver);
+ return usb_composite_register(&gserial_driver);
}
-module_init(gs_module_init);
+module_init(init);
-/*
- * gs_module_exit
- *
- * Unregister as a tty driver and a USB gadget driver.
- */
-static void __exit gs_module_exit(void)
+static void __exit cleanup(void)
{
- usb_gadget_unregister_driver(&gs_gadget_driver);
+ usb_composite_unregister(&gserial_driver);
+ gserial_cleanup();
}
-module_exit(gs_module_exit);
+module_exit(cleanup);
projects / mirror_ubuntu-eoan-kernel.git / commitdiff