config PLL_BYPASS
bool "Bypass PLL"
- depends on BFIN_KERNEL_CLOCK
+ depends on BFIN_KERNEL_CLOCK && (!BF60x)
default n
config CLKIN_HALF
default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
- default "20" if BFIN561_EZKIT
+ default "20" if (BFIN561_EZKIT || BF609)
default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
default "25" if BFIN527_AD7160EVAL
help
int "System Clock Divider"
depends on BFIN_KERNEL_CLOCK
range 1 15
- default 5
+ default 4
help
- This sets the frequency of the system clock (including SDRAM or DDR).
+ This sets the frequency of the system clock (including SDRAM or DDR) on
+ !BF60x else it set the clock for system buses and provides the
+ source from which SCLK0 and SCLK1 are derived.
This can be between 1 and 15
System Clock = (PLL frequency) / (this setting)
+config SCLK0_DIV
+ int "System Clock0 Divider"
+ depends on BFIN_KERNEL_CLOCK && BF60x
+ range 1 15
+ default 1
+ help
+ This sets the frequency of the system clock0 for PVP and all other
+ peripherals not clocked by SCLK1.
+ This can be between 1 and 15
+ System Clock0 = (System Clock) / (this setting)
+
+config SCLK1_DIV
+ int "System Clock1 Divider"
+ depends on BFIN_KERNEL_CLOCK && BF60x
+ range 1 15
+ default 1
+ help
+ This sets the frequency of the system clock1 (including SPORT, SPI and ACM).
+ This can be between 1 and 15
+ System Clock1 = (System Clock) / (this setting)
+
+config DCLK_DIV
+ int "DDR Clock Divider"
+ depends on BFIN_KERNEL_CLOCK && BF60x
+ range 1 15
+ default 2
+ help
+ This sets the frequency of the DDR memory.
+ This can be between 1 and 15
+ DDR Clock = (PLL frequency) / (this setting)
+
choice
prompt "DDR SDRAM Chip Type"
depends on BFIN_KERNEL_CLOCK
choice
prompt "DDR/SDRAM Timing"
- depends on BFIN_KERNEL_CLOCK
+ depends on BFIN_KERNEL_CLOCK && !BF60x
default BFIN_KERNEL_CLOCK_MEMINIT_CALC
help
This option allows you to specify Blackfin SDRAM/DDR Timing parameters
default 600000000 if BF548
default 533333333 if BF549
default 600000000 if BF561
+ default 800000000 if BF609
config MIN_VCO_HZ
int
config MAX_SCLK_HZ
int
+ default 200000000 if BF609
default 133333333
config MIN_SCLK_HZ
{
u32 mmr;
unsigned long sclk, cclk;
-#ifdef CONFIG_BF60x
- struct clk *clk;
-#endif
native_machine_early_platform_add_devices();
~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
#endif
-#ifdef CONFIG_BF60x
- clk = clk_get(NULL, "CCLK");
- if (!IS_ERR(clk)) {
- cclk = clk_get_rate(clk);
- clk_put(clk);
- } else
- cclk = 0;
-
- clk = clk_get(NULL, "SCLK0");
- if (!IS_ERR(clk)) {
- sclk = clk_get_rate(clk);
- clk_put(clk);
- } else
- sclk = 0;
-#else
cclk = get_cclk();
sclk = get_sclk();
-#endif
if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
+#ifdef CONFIG_BF60x
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock, %lu MHz SCLk, %lu MHz SCLK0, %lu MHz SCLK1 and %lu MHz DCLK\n",
+ cclk / 1000000, sclk / 1000000, get_sclk0() / 1000000, get_sclk1() / 1000000, get_dclk() / 1000000);
+#else
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
cclk / 1000000, sclk / 1000000);
+#endif
setup_bootmem_allocator();
#include <asm/mem_init.h>
#include <asm/dpmc.h>
+#ifdef CONFIG_BF60x
+#define CSEL_P 0
+#define S0SEL_P 5
+#define SYSSEL_P 8
+#define S1SEL_P 13
+#define DSEL_P 16
+#define OSEL_P 22
+#define ALGN_P 29
+#define UPDT_P 30
+#define LOCK_P 31
+
+#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF)
+#define CGU_DIV_VAL \
+ ((CONFIG_CCLK_DIV << CSEL_P) | \
+ (CONFIG_SCLK_DIV << SYSSEL_P) | \
+ (CONFIG_SCLK0_DIV << S0SEL_P) | \
+ (CONFIG_SCLK1_DIV << S1SEL_P) | \
+ (CONFIG_DCLK_DIV << DSEL_P))
+
+#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000)
+#if ((CONFIG_BFIN_DCLK != 125) && \
+ (CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \
+ (CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \
+ (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250))
+#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz"
+#endif
+struct ddr_config {
+ u32 ddr_clk;
+ u32 dmc_ddrctl;
+ u32 dmc_ddrcfg;
+ u32 dmc_ddrtr0;
+ u32 dmc_ddrtr1;
+ u32 dmc_ddrtr2;
+ u32 dmc_ddrmr;
+ u32 dmc_ddrmr1;
+};
+
+struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = {
+ [0] = {
+ .ddr_clk = 125,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20705212,
+ .dmc_ddrtr1 = 0x201003CF,
+ .dmc_ddrtr2 = 0x00320107,
+ .dmc_ddrmr = 0x00000422,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [1] = {
+ .ddr_clk = 133,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20806313,
+ .dmc_ddrtr1 = 0x2013040D,
+ .dmc_ddrtr2 = 0x00320108,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [2] = {
+ .ddr_clk = 150,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20A07323,
+ .dmc_ddrtr1 = 0x20160492,
+ .dmc_ddrtr2 = 0x00320209,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [3] = {
+ .ddr_clk = 166,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20A07323,
+ .dmc_ddrtr1 = 0x2016050E,
+ .dmc_ddrtr2 = 0x00320209,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [4] = {
+ .ddr_clk = 200,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20a07323,
+ .dmc_ddrtr1 = 0x2016050f,
+ .dmc_ddrtr2 = 0x00320509,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [5] = {
+ .ddr_clk = 225,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20E0A424,
+ .dmc_ddrtr1 = 0x302006DB,
+ .dmc_ddrtr2 = 0x0032020D,
+ .dmc_ddrmr = 0x00000842,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [6] = {
+ .ddr_clk = 250,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20E0A424,
+ .dmc_ddrtr1 = 0x3020079E,
+ .dmc_ddrtr2 = 0x0032020D,
+ .dmc_ddrmr = 0x00000842,
+ .dmc_ddrmr1 = 0x4,
+ },
+};
+#else
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
- (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
+ (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
+#endif
__attribute__((l1_text))
static void do_sync(void)
* For example, any automatic DMAs left by U-Boot for splash screens.
*/
-#if 0
+#ifdef CONFIG_BF60x
+ int i, dlldatacycle, dll_ctl;
+ bfin_write32(CGU0_DIV, CGU_DIV_VAL);
+ bfin_write32(CGU0_CTL, CGU_CTL_VAL);
+ while ((bfin_read32(CGU0_STAT) & 0x8) || !(bfin_read32(CGU0_STAT) & 0x4))
+ continue;
+
+ bfin_write32(CGU0_DIV, CGU_DIV_VAL | (1 << UPDT_P));
+ while (bfin_read32(CGU0_STAT) & (1 << 3))
+ continue;
+
+ for (i = 0; i < 7; i++) {
+ if (ddr_config_table[i].ddr_clk == CONFIG_BFIN_DCLK) {
+ bfin_write_DDR0_CFG(ddr_config_table[i].dmc_ddrcfg);
+ bfin_write_DDR0_TR0(ddr_config_table[i].dmc_ddrtr0);
+ bfin_write_DDR0_TR1(ddr_config_table[i].dmc_ddrtr1);
+ bfin_write_DDR0_TR2(ddr_config_table[i].dmc_ddrtr2);
+ bfin_write_DDR0_MR(ddr_config_table[i].dmc_ddrmr);
+ bfin_write_DDR0_EMR1(ddr_config_table[i].dmc_ddrmr1);
+ bfin_write_DDR0_CTL(ddr_config_table[i].dmc_ddrctl);
+ break;
+ }
+ }
+
+ do_sync();
+ while (!(bfin_read_DDR0_STAT() & 0x4))
+ continue;
+
+ dlldatacycle = (bfin_read_DDR0_STAT() & 0x00f00000) >> 20;
+ dll_ctl = bfin_read_DDR0_DLLCTL();
+ dll_ctl &= 0x0ff;
+ bfin_write_DDR0_DLLCTL(dll_ctl | (dlldatacycle << 8));
+
+ do_sync();
+ while (!(bfin_read_DDR0_STAT() & 0x2000))
+ continue;
+#else
size_t i;
for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
struct dma_register *dma = dma_io_base_addr[i];
#ifdef CONFIG_MEM_EBIU_DDRQUE
bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
#endif
+#endif
#endif
do_sync();
bfin_read16(0);
-#endif
}
projects / mirror_ubuntu-kernels.git / commitdiff