#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/host.h>
+#include <linux/pm_runtime.h>
#include "host.h"
#include "decl.h"
#include "cmd.h"
#include "if_sdio.h"
+static void if_sdio_interrupt(struct sdio_func *func);
+
/* The if_sdio_remove() callback function is called when
* user removes this module from kernel space or ejects
* the card from the slot. The driver handles these 2 cases
return ret;
}
+/********************************************************************/
+/* Power management */
+/********************************************************************/
+
+static int if_sdio_power_on(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct lbs_private *priv = card->priv;
+ struct mmc_host *host = func->card->host;
+ int ret;
+
+ sdio_claim_host(func);
+
+ ret = sdio_enable_func(func);
+ if (ret)
+ goto release;
+
+ /* For 1-bit transfers to the 8686 model, we need to enable the
+ * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+ * bit to allow access to non-vendor registers. */
+ if ((card->model == MODEL_8686) &&
+ (host->caps & MMC_CAP_SDIO_IRQ) &&
+ (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+ u8 reg;
+
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+
+ reg |= SDIO_BUS_ECSI;
+ sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+ }
+
+ card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
+ if (ret)
+ goto disable;
+
+ sdio_release_host(func);
+ ret = if_sdio_prog_firmware(card);
+ sdio_claim_host(func);
+ if (ret)
+ goto disable;
+
+ /*
+ * Get rx_unit if the chip is SD8688 or newer.
+ * SD8385 & SD8686 do not have rx_unit.
+ */
+ if ((card->model != MODEL_8385)
+ && (card->model != MODEL_8686))
+ card->rx_unit = if_sdio_read_rx_unit(card);
+ else
+ card->rx_unit = 0;
+
+ /*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
+ /*
+ * Enable interrupts now that everything is set up
+ */
+ sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
+ if (ret)
+ goto release_irq;
+
+ sdio_release_host(func);
+
+ /*
+ * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
+ */
+ if (card->model == MODEL_8688) {
+ struct cmd_header cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ lbs_deb_sdio("send function INIT command\n");
+ if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
+ lbs_cmd_copyback, (unsigned long) &cmd))
+ netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
+ }
+
+ priv->fw_ready = 1;
+
+ return 0;
+
+release_irq:
+ sdio_release_irq(func);
+disable:
+ sdio_disable_func(func);
+release:
+ sdio_release_host(func);
+ return ret;
+}
+
+static int if_sdio_power_off(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct lbs_private *priv = card->priv;
+
+ priv->fw_ready = 0;
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+ return 0;
+}
+
+
/*******************************************************************/
/* Libertas callbacks */
/*******************************************************************/
schedule_work(&card_reset_work);
}
+static int if_sdio_power_save(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+ int ret;
+
+ flush_workqueue(card->workqueue);
+
+ ret = if_sdio_power_off(card);
+
+ /* Let runtime PM know the card is powered off */
+ pm_runtime_put_sync(&card->func->dev);
+
+ return ret;
+}
+
+static int if_sdio_power_restore(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+
+ /* Make sure the card will not be powered off by runtime PM */
+ pm_runtime_get_sync(&card->func->dev);
+
+ return if_sdio_power_on(card);
+}
+
+
/*******************************************************************/
/* SDIO callbacks */
/*******************************************************************/
int ret, i;
unsigned int model;
struct if_sdio_packet *packet;
- struct mmc_host *host = func->card->host;
lbs_deb_enter(LBS_DEB_SDIO);
goto free;
}
- sdio_claim_host(func);
-
- ret = sdio_enable_func(func);
- if (ret)
- goto release;
-
- /* For 1-bit transfers to the 8686 model, we need to enable the
- * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
- * bit to allow access to non-vendor registers. */
- if ((card->model == MODEL_8686) &&
- (host->caps & MMC_CAP_SDIO_IRQ) &&
- (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
- u8 reg;
-
- func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
- reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
- if (ret)
- goto release_int;
-
- reg |= SDIO_BUS_ECSI;
- sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
- if (ret)
- goto release_int;
- }
-
- card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
- if (ret)
- goto release_int;
-
- card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
- if (ret)
- goto release_int;
-
- card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
- if (ret)
- goto release_int;
-
- sdio_release_host(func);
-
sdio_set_drvdata(func, card);
lbs_deb_sdio("class = 0x%X, vendor = 0x%X, "
func->class, func->vendor, func->device,
model, (unsigned)card->ioport);
- ret = if_sdio_prog_firmware(card);
- if (ret)
- goto reclaim;
priv = lbs_add_card(card, &func->dev);
if (!priv) {
ret = -ENOMEM;
- goto reclaim;
+ goto free;
}
card->priv = priv;
priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
priv->reset_card = if_sdio_reset_card;
+ priv->power_save = if_sdio_power_save;
+ priv->power_restore = if_sdio_power_restore;
- sdio_claim_host(func);
-
- /*
- * Get rx_unit if the chip is SD8688 or newer.
- * SD8385 & SD8686 do not have rx_unit.
- */
- if ((card->model != MODEL_8385)
- && (card->model != MODEL_8686))
- card->rx_unit = if_sdio_read_rx_unit(card);
- else
- card->rx_unit = 0;
-
- /*
- * Set up the interrupt handler late.
- *
- * If we set it up earlier, the (buggy) hardware generates a spurious
- * interrupt, even before the interrupt has been enabled, with
- * CCCR_INTx = 0.
- *
- * We register the interrupt handler late so that we can handle any
- * spurious interrupts, and also to avoid generation of that known
- * spurious interrupt in the first place.
- */
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
- /*
- * Enable interrupts now that everything is set up
- */
- sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
- sdio_release_host(func);
+ ret = if_sdio_power_on(card);
if (ret)
- goto reclaim;
-
- priv->fw_ready = 1;
-
- /*
- * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
- */
- if (card->model == MODEL_8688) {
- struct cmd_header cmd;
-
- memset(&cmd, 0, sizeof(cmd));
-
- lbs_deb_sdio("send function INIT command\n");
- if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
- lbs_cmd_copyback, (unsigned long) &cmd))
- netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
- }
+ goto err_activate_card;
ret = lbs_start_card(priv);
+ if_sdio_power_off(card);
if (ret)
goto err_activate_card;
+ /* Tell PM core that we don't need the card to be powered now */
+ pm_runtime_put_noidle(&func->dev);
+
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
err_activate_card:
flush_workqueue(card->workqueue);
lbs_remove_card(priv);
-reclaim:
- sdio_claim_host(func);
-release_int:
- sdio_release_irq(func);
-disable:
- sdio_disable_func(func);
-release:
- sdio_release_host(func);
free:
destroy_workqueue(card->workqueue);
while (card->packets) {
card = sdio_get_drvdata(func);
+ /* Undo decrement done above in if_sdio_probe */
+ pm_runtime_get_noresume(&func->dev);
+
if (user_rmmod && (card->model == MODEL_8688)) {
/*
* FUNC_SHUTDOWN is required for SD8688 WLAN/BT
flush_workqueue(card->workqueue);
destroy_workqueue(card->workqueue);
- sdio_claim_host(func);
- sdio_release_irq(func);
- sdio_disable_func(func);
- sdio_release_host(func);
-
while (card->packets) {
packet = card->packets;
card->packets = card->packets->next;
projects / mirror_ubuntu-artful-kernel.git / commitdiff