return relogin;
}
+static void qla4xxx_flush_AENS(struct scsi_qla_host *ha)
+{
+ unsigned long wtime;
+
+ /* Flush the 0x8014 AEN from the firmware as a result of
+ * Auto connect. We are basically doing get_firmware_ddb()
+ * to determine whether we need to log back in or not.
+ * Trying to do a set ddb before we have processed 0x8014
+ * will result in another set_ddb() for the same ddb. In other
+ * words there will be stale entries in the aen_q.
+ */
+ wtime = jiffies + (2 * HZ);
+ do {
+ if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS)
+ if (ha->firmware_state & (BIT_2 | BIT_0))
+ return;
+
+ if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
+ qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+
+ msleep(1000);
+ } while (!time_after_eq(jiffies, wtime));
+}
+
/**
- * qla4xxx_configure_ddbs - builds driver ddb list
+ * qla4xxx_build_ddb_list - builds driver ddb list
* @ha: Pointer to host adapter structure.
*
* This routine searches for all valid firmware ddb entries and builds
* an internal ddb list. Ddbs that are considered valid are those with
* a device state of SESSION_ACTIVE.
+ * A relogin (set_ddb) is issued for DDBs that are not online.
**/
static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
{
uint32_t ipv6_device;
uint32_t new_tgt;
+ qla4xxx_flush_AENS(ha);
+
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (fw_ddb_entry == NULL) {
return status;
}
-struct qla4_relog_scan {
- int halt_wait;
- uint32_t conn_err;
- uint32_t fw_ddb_index;
- uint32_t next_fw_ddb_index;
- uint32_t fw_ddb_device_state;
-};
-
-static int qla4_test_rdy(struct scsi_qla_host *ha, struct qla4_relog_scan *rs)
-{
- struct ddb_entry *ddb_entry;
-
- if (qla4_is_relogin_allowed(ha, rs->conn_err)) {
- /* We either have a device that is in
- * the process of relogging in or a
- * device that is waiting to be
- * relogged in */
- rs->halt_wait = 0;
-
- ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha,
- rs->fw_ddb_index);
- if (ddb_entry == NULL)
- return QLA_ERROR;
-
- if (ddb_entry->dev_scan_wait_to_start_relogin != 0
- && time_after_eq(jiffies,
- ddb_entry->
- dev_scan_wait_to_start_relogin))
- {
- ddb_entry->dev_scan_wait_to_start_relogin = 0;
- qla4xxx_set_ddb_entry(ha, rs->fw_ddb_index, 0);
- }
- }
- return QLA_SUCCESS;
-}
-
-static int qla4_scan_for_relogin(struct scsi_qla_host *ha,
- struct qla4_relog_scan *rs)
-{
- int error;
-
- /* scan for relogins
- * ----------------- */
- for (rs->fw_ddb_index = 0; rs->fw_ddb_index < MAX_DDB_ENTRIES;
- rs->fw_ddb_index = rs->next_fw_ddb_index) {
- if (qla4xxx_get_fwddb_entry(ha, rs->fw_ddb_index, NULL, 0,
- NULL, &rs->next_fw_ddb_index,
- &rs->fw_ddb_device_state,
- &rs->conn_err, NULL, NULL)
- == QLA_ERROR)
- return QLA_ERROR;
-
- if (rs->fw_ddb_device_state == DDB_DS_LOGIN_IN_PROCESS)
- rs->halt_wait = 0;
-
- if (rs->fw_ddb_device_state == DDB_DS_SESSION_FAILED ||
- rs->fw_ddb_device_state == DDB_DS_NO_CONNECTION_ACTIVE) {
- error = qla4_test_rdy(ha, rs);
- if (error)
- return error;
- }
-
- /* We know we've reached the last device when
- * next_fw_ddb_index is 0 */
- if (rs->next_fw_ddb_index == 0)
- break;
- }
- return QLA_SUCCESS;
-}
-
-/**
- * qla4xxx_devices_ready - wait for target devices to be logged in
- * @ha: pointer to adapter structure
- *
- * This routine waits up to ql4xdiscoverywait seconds
- * F/W database during driver load time.
- **/
-static int qla4xxx_devices_ready(struct scsi_qla_host *ha)
-{
- int error;
- unsigned long discovery_wtime;
- struct qla4_relog_scan rs;
-
- discovery_wtime = jiffies + (ql4xdiscoverywait * HZ);
-
- DEBUG(printk("Waiting (%d) for devices ...\n", ql4xdiscoverywait));
- do {
- /* poll for AEN. */
- qla4xxx_get_firmware_state(ha);
- if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags)) {
- /* Set time-between-relogin timer */
- qla4xxx_process_aen(ha, RELOGIN_DDB_CHANGED_AENS);
- }
-
- /* if no relogins active or needed, halt discvery wait */
- rs.halt_wait = 1;
-
- error = qla4_scan_for_relogin(ha, &rs);
-
- if (rs.halt_wait) {
- DEBUG2(printk("scsi%ld: %s: Delay halted. Devices "
- "Ready.\n", ha->host_no, __func__));
- return QLA_SUCCESS;
- }
-
- msleep(2000);
- } while (!time_after_eq(jiffies, discovery_wtime));
-
- DEBUG3(qla4xxx_get_conn_event_log(ha));
-
- return QLA_SUCCESS;
-}
-
-static void qla4xxx_flush_AENS(struct scsi_qla_host *ha)
-{
- unsigned long wtime;
-
- /* Flush the 0x8014 AEN from the firmware as a result of
- * Auto connect. We are basically doing get_firmware_ddb()
- * to determine whether we need to log back in or not.
- * Trying to do a set ddb before we have processed 0x8014
- * will result in another set_ddb() for the same ddb. In other
- * words there will be stale entries in the aen_q.
- */
- wtime = jiffies + (2 * HZ);
- do {
- if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS)
- if (ha->firmware_state & (BIT_2 | BIT_0))
- return;
-
- if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
- qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
-
- msleep(1000);
- } while (!time_after_eq(jiffies, wtime));
-
-}
-
static int qla4xxx_initialize_ddb_list(struct scsi_qla_host *ha)
{
uint16_t fw_ddb_index;
for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; fw_ddb_index++)
ha->fw_ddb_index_map[fw_ddb_index] =
- (struct ddb_entry *)INVALID_ENTRY;
+ (struct ddb_entry *)INVALID_ENTRY;
ha->tot_ddbs = 0;
- qla4xxx_flush_AENS(ha);
-
- /* Wait for an AEN */
- qla4xxx_devices_ready(ha);
-
- /*
- * First perform device discovery for active
- * fw ddb indexes and build
- * ddb list.
- */
- if ((status = qla4xxx_build_ddb_list(ha)) == QLA_ERROR)
- return status;
+ /* Perform device discovery and build ddb list. */
+ status = qla4xxx_build_ddb_list(ha);
return status;
}
projects / mirror_ubuntu-bionic-kernel.git / commitdiff