net: phy: dp83822: disable MDI crossover status change interrupt

If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.

As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 8549e0e356c9b42226003c0f02a734192b9d5e18..b60db8b6f47744c67b7fc32f7879bb3b68192ee6 100644 (file)
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -254,8 +254,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
                                DP83822_EEE_ERROR_CHANGE_INT_EN);
 
                if (!dp83822->fx_enabled)
-                       misr_status |= DP83822_MDI_XOVER_INT_EN |
-                                      DP83822_ANEG_ERR_INT_EN |
+                       misr_status |= DP83822_ANEG_ERR_INT_EN |
                                       DP83822_WOL_PKT_INT_EN;
 
                err = phy_write(phydev, MII_DP83822_MISR2, misr_status);