.flags2 = FLAG2_DISABLE_ASPM_L1
| FLAG2_DISABLE_ASPM_L0S,
.pba = 20,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN,
.get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_m88,
((adapter->hw.mac.type >= e1000_pch2lan) &&
(!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+ adapter->max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
hw->mac.ops.blink_led = NULL;
}
| FLAG_HAS_FLASH
| FLAG_APME_IN_WUC,
.pba = 8,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN,
.get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
.phy_ops = &ich8_phy_ops,
.flags2 = FLAG2_HAS_PHY_STATS
| FLAG2_HAS_EEE,
.pba = 26,
- .max_hw_frame_size = 9018,
+ .max_hw_frame_size = 9022,
.get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
.phy_ops = &ich8_phy_ops,
.flags2 = FLAG2_HAS_PHY_STATS
| FLAG2_HAS_EEE,
.pba = 26,
- .max_hw_frame_size = 9018,
+ .max_hw_frame_size = 9022,
.get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
.phy_ops = &ich8_phy_ops,
.flags2 = FLAG2_HAS_PHY_STATS
| FLAG2_HAS_EEE,
.pba = 26,
- .max_hw_frame_size = 9018,
+ .max_hw_frame_size = 9022,
.get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
.phy_ops = &ich8_phy_ops,
/* reset Packet Buffer Allocation to default */
ew32(PBA, pba);
- if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) {
/* To maintain wire speed transmits, the Tx FIFO should be
* large enough to accommodate two full transmit packets,
* rounded up to the next 1KB and expressed in KB. Likewise,
{
struct net_device *netdev = adapter->netdev;
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
+ adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
adapter->rx_ps_bsize0 = 128;
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->tx_ring_count = E1000_DEFAULT_TXD;
adapter->rx_ring_count = E1000_DEFAULT_RXD;
static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN;
+ int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) &&
!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
/* Supported frame sizes */
- if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
+ if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) ||
(max_frame > adapter->max_hw_frame_size)) {
e_err("Unsupported MTU setting\n");
return -EINVAL;
adapter->rx_buffer_len = 4096;
/* adjust allocation if LPE protects us, and we aren't using SBP */
- if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN;
+ if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN))
+ adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
if (netif_running(netdev))
e1000e_up(adapter);