return mos7840_num_ports;
}
-/****************************************************************************
- * mos7840_startup
- ****************************************************************************/
-
-static int mos7840_startup(struct usb_serial *serial)
+static int mos7840_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct moschip_port *mos7840_port;
- struct usb_device *dev;
- int i, status;
+ int status;
+ int pnum;
__u16 Data;
- dev = serial->dev;
-
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
- /* set up port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
+ pnum = port->number - serial->minor;
+
+ /* FIXME: remove do-while(0) loop used to keep stable patch minimal.
+ */
+ do {
+ dev_dbg(&port->dev, "mos7840_startup: configuring port %d............\n", pnum);
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- status = -ENOMEM;
- i--; /* don't follow NULL pointer cleaning up */
- goto error;
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
+ return -ENOMEM;
}
/* Initialize all port interrupt end point to port 0 int
* endpoint. Our device has only one interrupt end point
* common to all port */
- mos7840_port->port = serial->port[i];
- mos7840_set_port_private(serial->port[i], mos7840_port);
+ mos7840_port->port = port;
+ mos7840_set_port_private(port, mos7840_port);
spin_lock_init(&mos7840_port->pool_lock);
/* minor is not initialised until later by
* usb-serial.c:get_free_serial() and cannot therefore be used
* to index device instances */
- mos7840_port->port_num = i + 1;
- dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
- dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
- dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
+ mos7840_port->port_num = pnum + 1;
+ dev_dbg(&port->dev, "port->number = %d\n", port->number);
+ dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+ dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
mos7840_port->ControlRegOffset = 0xd;
mos7840_port->DcrRegOffset = 0x1c;
}
- mos7840_dump_serial_port(serial->port[i], mos7840_port);
- mos7840_set_port_private(serial->port[i], mos7840_port);
+ mos7840_dump_serial_port(port, mos7840_port);
+ mos7840_set_port_private(port, mos7840_port);
/* enable rx_disable bit in control register */
- status = mos7840_get_reg_sync(serial->port[i],
+ status = mos7840_get_reg_sync(port,
mos7840_port->ControlRegOffset, &Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
+ dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
Data |= 0x08; /* setting driver done bit */
Data |= 0x04; /* sp1_bit to have cts change reflect in
modem status reg */
/* Data |= 0x20; //rx_disable bit */
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
+ dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
and 0x24 in DCR3 */
Data = 0x01;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
(__u16) (mos7840_port->DcrRegOffset + 0), Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
+ dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
Data = 0x05;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
(__u16) (mos7840_port->DcrRegOffset + 1), Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
+ dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
Data = 0x24;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
(__u16) (mos7840_port->DcrRegOffset + 2), Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
+ dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
/* write values in clkstart0x0 and clkmulti 0x20 */
Data = 0x0;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
CLK_START_VALUE_REGISTER, Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+ dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
Data = 0x20;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
CLK_MULTI_REGISTER, Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
goto error;
} else
- dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
+ dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
/* write value 0x0 to scratchpad register */
Data = 0x00;
- status = mos7840_set_uart_reg(serial->port[i],
+ status = mos7840_set_uart_reg(port,
SCRATCH_PAD_REGISTER, Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
break;
} else
- dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+ dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
/* Zero Length flag register */
if ((mos7840_port->port_num != 1)
&& (serial->num_ports == 2)) {
Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num)), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
break;
} else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
} else {
Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
+ status = mos7840_set_reg_sync(port,
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num) - 0x1), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
break;
} else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
}
mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
mos7840_port->led_flag = false;
/* Turn off LED */
- mos7840_set_led_sync(serial->port[i],
+ mos7840_set_led_sync(port,
MODEM_CONTROL_REGISTER, 0x0300);
}
- }
+ } while (0);
- /* Zero Length flag enable */
- Data = 0x0f;
- status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
-
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT);
+ if (pnum == serial->num_ports - 1) {
+ /* Zero Length flag enable */
+ Data = 0x0f;
+ status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+ goto error;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
+
+ /* setting configuration feature to one */
+ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ 0x03, 0x00, 0x01, 0x00, NULL, 0x00,
+ MOS_WDR_TIMEOUT);
+ }
return 0;
error:
- for (/* nothing */; i >= 0; i--) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port->ctrl_buf);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port);
- kfree(mos7840_port->dr);
- kfree(mos7840_port->ctrl_buf);
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port);
- }
return status;
}
-/****************************************************************************
- * mos7840_disconnect
- * This function is called whenever the device is removed from the usb bus.
- ****************************************************************************/
-
-static void mos7840_disconnect(struct usb_serial *serial)
+static int mos7840_port_remove(struct usb_serial_port *port)
{
- int i;
- unsigned long flags;
struct moschip_port *mos7840_port;
- /* check for the ports to be closed,close the ports and disconnect */
+ mos7840_port = mos7840_get_port_private(port);
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
+ if (mos7840_port->has_led) {
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- usb_kill_urb(mos7840_port->control_urb);
- }
+ del_timer_sync(&mos7840_port->led_timer1);
+ del_timer_sync(&mos7840_port->led_timer2);
}
-}
-
-/****************************************************************************
- * mos7840_release
- * This function is called when the usb_serial structure is freed.
- ****************************************************************************/
-
-static void mos7840_release(struct usb_serial *serial)
-{
- int i;
- struct moschip_port *mos7840_port;
+ usb_kill_urb(mos7840_port->control_urb);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
- /* check for the ports to be closed,close the ports and disconnect */
-
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
-
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- if (mos7840_port->has_led) {
- /* Turn off LED */
- mos7840_set_led_sync(mos7840_port->port,
- MODEM_CONTROL_REGISTER, 0x0300);
-
- del_timer_sync(&mos7840_port->led_timer1);
- del_timer_sync(&mos7840_port->led_timer2);
- }
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
- }
- }
+ return 0;
}
static struct usb_serial_driver moschip7840_4port_device = {
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.get_icount = mos7840_get_icount,
- .attach = mos7840_startup,
- .disconnect = mos7840_disconnect,
- .release = mos7840_release,
+ .port_probe = mos7840_port_probe,
+ .port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
.read_int_callback = mos7840_interrupt_callback,
};
projects / mirror_ubuntu-eoan-kernel.git / commitdiff