+++ /dev/null
-package PVE::CLI::pve5to6;
-
-use strict;
-use warnings;
-
-use PVE::API2::APT;
-use PVE::API2::Ceph;
-use PVE::API2::LXC;
-use PVE::API2::Qemu;
-use PVE::API2::Certificates;
-
-use PVE::Ceph::Tools;
-use PVE::Cluster;
-use PVE::Corosync;
-use PVE::INotify;
-use PVE::JSONSchema;
-use PVE::RPCEnvironment;
-use PVE::Storage;
-use PVE::Tools qw(run_command);
-use PVE::QemuServer;
-
-use Term::ANSIColor;
-
-use PVE::CLIHandler;
-
-use base qw(PVE::CLIHandler);
-
-my $nodename = PVE::INotify::nodename();
-
-sub setup_environment {
- PVE::RPCEnvironment->setup_default_cli_env();
-}
-
-my $min_pve_major = 5;
-my $min_pve_minor = 4;
-my $min_pve_pkgrel = 2;
-
-my $counters = {
- pass => 0,
- skip => 0,
- warn => 0,
- fail => 0,
-};
-
-my $log_line = sub {
- my ($level, $line) = @_;
-
- $counters->{$level}++ if defined($level) && defined($counters->{$level});
-
- print uc($level), ': ' if defined($level);
- print "$line\n";
-};
-
-sub log_pass {
- print color('green');
- $log_line->('pass', @_);
- print color('reset');
-}
-
-sub log_info {
- $log_line->('info', @_);
-}
-sub log_skip {
- $log_line->('skip', @_);
-}
-sub log_warn {
- print color('yellow');
- $log_line->('warn', @_);
- print color('reset');
-}
-sub log_fail {
- print color('red');
- $log_line->('fail', @_);
- print color('reset');
-}
-
-my $print_header_first = 1;
-sub print_header {
- my ($h) = @_;
- print "\n" if !$print_header_first;
- print "= $h =\n\n";
- $print_header_first = 0;
-}
-
-my $get_systemd_unit_state = sub {
- my ($unit) = @_;
-
- my $state;
- my $filter_output = sub {
- $state = shift;
- chomp $state;
- };
- eval {
- run_command(['systemctl', 'is-enabled', "$unit"], outfunc => $filter_output, noerr => 1);
- return if !defined($state);
- run_command(['systemctl', 'is-active', "$unit"], outfunc => $filter_output, noerr => 1);
- };
-
- return $state // 'unknown';
-};
-my $log_systemd_unit_state = sub {
- my ($unit, $no_fail_on_inactive) = @_;
-
- my $log_method = \&log_warn;
-
- my $state = $get_systemd_unit_state->($unit);
- if ($state eq 'active') {
- $log_method = \&log_pass;
- } elsif ($state eq 'inactive') {
- $log_method = $no_fail_on_inactive ? \&log_warn : \&log_fail;
- } elsif ($state eq 'failed') {
- $log_method = \&log_fail;
- }
-
- $log_method->("systemd unit '$unit' is in state '$state'");
-};
-
-my $versions;
-my $get_pkg = sub {
- my ($pkg) = @_;
-
- $versions = eval { PVE::API2::APT->versions({ node => $nodename }) } if !defined($versions);
-
- if (!defined($versions)) {
- my $msg = "unable to retrieve package version information";
- $msg .= "- $@" if $@;
- log_fail("$msg");
- return undef;
- }
-
- my $pkgs = [ grep { $_->{Package} eq $pkg } @$versions ];
- if (!defined $pkgs || $pkgs == 0) {
- log_fail("unable to determine installed $pkg version.");
- return undef;
- } else {
- return $pkgs->[0];
- }
-};
-
-sub check_pve_packages {
- print_header("CHECKING VERSION INFORMATION FOR PVE PACKAGES");
-
- print "Checking for package updates..\n";
- my $updates = eval { PVE::API2::APT->list_updates({ node => $nodename }); };
- if (!defined($updates)) {
- log_warn("$@") if $@;
- log_fail("unable to retrieve list of package updates!");
- } elsif (@$updates > 0) {
- my $pkgs = join(', ', map { $_->{Package} } @$updates);
- log_warn("updates for the following packages are available:\n $pkgs");
- } else {
- log_pass("all packages uptodate");
- }
-
- print "\nChecking proxmox-ve package version..\n";
- if (defined(my $proxmox_ve = $get_pkg->('proxmox-ve'))) {
- my $min_pve_ver = "$min_pve_major.$min_pve_minor-$min_pve_pkgrel";
-
- my ($maj, $min, $pkgrel) = $proxmox_ve->{OldVersion} =~ m/^(\d+)\.(\d+)-(\d+)/;
-
- my $upgraded = 0;
-
- if ($maj > $min_pve_major) {
- if ($maj > $min_pve_major + 1) {
- log_warn("already upgraded at least two major versions of Proxmox VE, this script is probably not useful anymore");
- } else {
- log_pass("already upgraded to Proxmox VE " . ($min_pve_major + 1));
- }
- log_pass("There's a newer major release available, maybe you wanted to call 'pve6to7'?") if 0; # TODO: enable once PVE 7 is out
- $upgraded = 1;
- } elsif ($maj >= $min_pve_major && $min >= $min_pve_minor && $pkgrel >= $min_pve_pkgrel) {
- log_pass("proxmox-ve package has version >= $min_pve_ver");
- } else {
- log_fail("proxmox-ve package is too old, please upgrade to >= $min_pve_ver!");
- }
-
- my ($krunning, $kinstalled) = (qr/5\./, 'pve-kernel-5.0');
- if (!$upgraded) {
- ($krunning, $kinstalled) = (qr/4\.15/, 'pve-kernel-4.15');
- }
-
- print "\nChecking running kernel version..\n";
- my $kernel_ver = $proxmox_ve->{RunningKernel};
- if (!defined($kernel_ver)) {
- log_fail("unable to determine running kernel version.");
- } elsif ($kernel_ver =~ /^$krunning/) {
- log_pass("expected running kernel '$kernel_ver'.");
- } elsif ($get_pkg->($kinstalled)) {
- log_warn("expected kernel '$kinstalled' intalled but not yet rebooted!");
- } else {
- log_warn("unexpected running and installed kernel '$kernel_ver'.");
- }
- }
-}
-
-sub get_vms_with_vmx {
- my $res = {
- cpu => [],
- flag => [],
- };
- my $vmlist = PVE::QemuServer::vzlist();
-
- foreach my $vmid ( sort { $a <=> $b } keys %$vmlist ) {
- my $pid = $vmlist->{$vmid}->{pid};
- next if !$pid; # skip not running vms
-
- my $cmdline = eval { PVE::Tools::file_get_contents("/proc/$pid/cmdline") };
- if ($cmdline) {
- my @args = split(/\0/, $cmdline);
- for (my $i = 0; $i < scalar(@args); $i++) {
- next if !$args[$i] || $args[$i] !~ m/^-?-cpu$/;
-
- my $cpuarg = $args[$i+1];
- if ($cpuarg =~ m/^(host|max)/) {
- push @{$res->{cpu}}, $vmid;
- } elsif ($cpuarg =~ m/\+(vmx|svm)/) {
- push @{$res->{flag}}, $vmid;
- }
- }
- }
- }
-
- $res = undef if (scalar(@{$res->{cpu}}) + scalar(@{$res->{flag}})) <= 0;
-
- return $res;
-}
-
-sub check_kvm_nested {
- log_info("Checking KVM nesting support, which breaks live migration for VMs using it..");
-
- my $module_sysdir = "/sys/module";
- if (-e "$module_sysdir/kvm_amd") {
- $module_sysdir .= "/kvm_amd/parameters";
- } elsif (-e "$module_sysdir/kvm_intel") {
- $module_sysdir .= "/kvm_intel/parameters";
- } else {
- log_skip("no kvm module found");
- return;
- }
-
- if (-f "$module_sysdir/nested") {
- my $val = eval { PVE::Tools::file_read_firstline("$module_sysdir/nested") };
- if ($val && $val =~ m/Y|1/) {
- my $list = get_vms_with_vmx();
- if (!defined($list)) {
- log_pass("KVM nested parameter set, but currently no VM with a 'vmx' or 'svm' flag is running.");
- } else {
- my $warnmsg = "KVM nested enabled. It will not be possible to live migrate the following running VMs to PVE 6:\n";
- if (@{$list->{cpu}}) {
- $warnmsg .= " VMID(s) with cputype 'host' or 'max': " . join(',', @{$list->{cpu}}) . "\n";
- }
- if (@{$list->{flag}}) {
- $warnmsg .= " VMID(s) with enforced cpu flag 'vmx' or 'svm': " . join(',', @{$list->{flag}}) . "\n";
- }
- log_warn($warnmsg);
- }
- } else {
- log_pass("KVM nested parameter not set.")
- }
- } else {
- log_skip("KVM nested parameter not found.");
- }
-}
-
-sub check_storage_health {
- print_header("CHECKING CONFIGURED STORAGES");
- my $cfg = PVE::Storage::config();
-
- my $ctime = time();
-
- my $info = PVE::Storage::storage_info($cfg);
-
- foreach my $storeid (keys %$info) {
- my $d = $info->{$storeid};
- if ($d->{enabled}) {
- if ($d->{type} eq 'sheepdog') {
- log_fail("storage '$storeid' of type 'sheepdog' is enabled - experimental sheepdog support dropped in PVE 6")
- } elsif ($d->{active}) {
- log_pass("storage '$storeid' enabled and active.");
- } else {
- log_warn("storage '$storeid' enabled but not active!");
- }
- } else {
- log_skip("storage '$storeid' disabled.");
- }
- }
-}
-
-sub check_cluster_corosync {
- print_header("CHECKING CLUSTER HEALTH/SETTINGS");
-
- if (!PVE::Corosync::check_conf_exists(1)) {
- log_skip("standalone node.");
- return;
- }
-
- $log_systemd_unit_state->('pve-cluster.service');
- $log_systemd_unit_state->('corosync.service');
-
- if (PVE::Cluster::check_cfs_quorum(1)) {
- log_pass("Cluster Filesystem is quorate.");
- } else {
- log_fail("Cluster Filesystem readonly, lost quorum?!");
- }
-
- my $conf = PVE::Cluster::cfs_read_file('corosync.conf');
- my $conf_nodelist = PVE::Corosync::nodelist($conf);
- my $node_votes = 0;
-
- print "\nAnalzying quorum settings and state..\n";
- if (!defined($conf_nodelist)) {
- log_fail("unable to retrieve nodelist from corosync.conf");
- } else {
- if (grep { $conf_nodelist->{$_}->{quorum_votes} != 1 } keys %$conf_nodelist) {
- log_warn("non-default quorum_votes distribution detected!");
- }
- map { $node_votes += $conf_nodelist->{$_}->{quorum_votes} // 0 } keys %$conf_nodelist;
- }
-
- my ($expected_votes, $total_votes);
- my $filter_output = sub {
- my $line = shift;
- ($expected_votes) = $line =~ /^Expected votes:\s*(\d+)\s*$/
- if !defined($expected_votes);
- ($total_votes) = $line =~ /^Total votes:\s*(\d+)\s*$/
- if !defined($total_votes);
- };
- eval {
- run_command(['corosync-quorumtool', '-s'], outfunc => $filter_output, noerr => 1);
- };
-
- if (!defined($expected_votes)) {
- log_fail("unable to get expected number of votes, setting to 0.");
- $expected_votes = 0;
- }
- if (!defined($total_votes)) {
- log_fail("unable to get expected number of votes, setting to 0.");
- $total_votes = 0;
- }
-
- my $cfs_nodelist = PVE::Cluster::get_clinfo()->{nodelist};
- my $offline_nodes = grep { $cfs_nodelist->{$_}->{online} != 1 } keys %$cfs_nodelist;
- if ($offline_nodes > 0) {
- log_fail("$offline_nodes nodes are offline!");
- }
-
- my $qdevice_votes = 0;
- if (my $qdevice_setup = $conf->{main}->{quorum}->{device}) {
- $qdevice_votes = $qdevice_setup->{votes} // 1;
- }
-
- log_info("configured votes - nodes: $node_votes");
- log_info("configured votes - qdevice: $qdevice_votes");
- log_info("current expected votes: $expected_votes");
- log_info("current total votes: $total_votes");
-
- log_warn("expected votes set to non-standard value '$expected_votes'.")
- if $expected_votes != $node_votes + $qdevice_votes;
- log_warn("total votes < expected votes: $total_votes/$expected_votes!")
- if $total_votes < $expected_votes;
-
- my $conf_nodelist_count = scalar(keys %$conf_nodelist);
- my $cfs_nodelist_count = scalar(keys %$cfs_nodelist);
- log_warn("cluster consists of less than three nodes!")
- if $conf_nodelist_count < 3 && $conf_nodelist_count + $qdevice_votes < 3;
-
- log_fail("corosync.conf ($conf_nodelist_count) and pmxcfs ($cfs_nodelist_count) don't agree about size of nodelist.")
- if $conf_nodelist_count != $cfs_nodelist_count;
-
- print "\nChecking nodelist entries..\n";
- foreach my $cs_node (keys %$conf_nodelist) {
- my $entry = $conf_nodelist->{$cs_node};
- log_fail("$cs_node: no name entry in corosync.conf.")
- if !defined($entry->{name});
- log_fail("$cs_node: no nodeid configured in corosync.conf.")
- if !defined($entry->{nodeid});
- log_fail("$cs_node: neither ring0_addr nor ring1_addr defined in corosync.conf.")
- if !defined($entry->{ring0_addr}) && !defined($entry->{ring1_addr});
-
- my $verify_ring_ip = sub {
- my $key = shift;
- my $ring = $entry->{$key};
- if (defined($ring)) {
- my ($resolved_ip, undef) = PVE::Corosync::resolve_hostname_like_corosync($ring, $conf);
- if (defined($resolved_ip)) {
- if ($resolved_ip ne $ring) {
- log_warn("$cs_node: $key '$ring' resolves to '$resolved_ip'.\n Consider replacing it with the currently resolved IP address.");
- } else {
- log_pass("$cs_node: $key is configured to use IP address '$ring'");
- }
- } else {
- log_fail("$cs_node: unable to resolve $key '$ring' to an IP address according to Corosync's resolve strategy - cluster will potentially fail with Corosync 3.x/kronosnet!");
- }
- }
- };
- $verify_ring_ip->('ring0_addr');
- $verify_ring_ip->('ring1_addr');
- }
-
- print "\nChecking totem settings..\n";
- my $totem = $conf->{main}->{totem};
- my $transport = $totem->{transport};
- if (defined($transport)) {
- if ($transport ne 'knet') {
- log_fail("Corosync transport explicitly set to '$transport' instead of implicit default!");
- } else {
- log_pass("Corosync transport set to '$transport'.");
- }
- } else {
- log_pass("Corosync transport set to implicit default.");
- }
-
- if ((!defined($totem->{secauth}) || $totem->{secauth} ne 'on') && (!defined($totem->{crypto_cipher}) || $totem->{crypto_cipher} eq 'none')) {
- log_fail("Corosync authentication/encryption is not explicitly enabled (secauth / crypto_cipher / crypto_hash)!");
- } else {
- if (defined($totem->{crypto_cipher}) && $totem->{crypto_cipher} eq '3des') {
- log_fail("Corosync encryption cipher set to '3des', no longer supported in Corosync 3.x!");
- } else {
- log_pass("Corosync encryption and authentication enabled.");
- }
- }
-
- print "\n";
- log_info("run 'pvecm status' to get detailed cluster status..");
-
- print_header("CHECKING INSTALLED COROSYNC VERSION");
- if (defined(my $corosync = $get_pkg->('corosync'))) {
- if ($corosync->{OldVersion} =~ m/^2\./) {
- log_fail("corosync 2.x installed, cluster-wide upgrade to 3.x needed!");
- } elsif ($corosync->{OldVersion} =~ m/^3\./) {
- log_pass("corosync 3.x installed.");
- } else {
- log_fail("unexpected corosync version installed: $corosync->{OldVersion}!");
- }
- }
-}
-
-sub check_ceph {
- print_header("CHECKING HYPER-CONVERGED CEPH STATUS");
-
- if (PVE::Ceph::Tools::check_ceph_inited(1)) {
- log_info("hyper-converged ceph setup detected!");
- } else {
- log_skip("no hyper-converged ceph setup detected!");
- return;
- }
-
- log_info("getting Ceph status/health information..");
- my $ceph_status = eval { PVE::API2::Ceph->status({ node => $nodename }); };
- my $osd_flags = eval { PVE::API2::Ceph->get_flags({ node => $nodename }); };
- my $noout_wanted = 1;
- my $noout = $osd_flags && $osd_flags =~ m/noout/;
-
- if (!$ceph_status || !$ceph_status->{health}) {
- log_fail("unable to determine Ceph status!");
- } else {
- my $ceph_health = $ceph_status->{health}->{status};
- if (!$ceph_health) {
- log_fail("unable to determine Ceph health!");
- } elsif ($ceph_health eq 'HEALTH_OK') {
- log_pass("Ceph health reported as 'HEALTH_OK'.");
- } elsif ($ceph_health eq 'HEALTH_WARN' && $noout && (keys %{$ceph_status->{health}->{checks}} == 1)) {
- log_pass("Ceph health reported as 'HEALTH_WARN' with a single failing check and 'noout' flag set.");
- } else {
- log_warn("Ceph health reported as '$ceph_health'.\n Use the PVE ".
- "dashboard or 'ceph -s' to determine the specific issues and try to resolve them.");
- }
- }
-
- log_info("getting Ceph OSD flags..");
- eval {
- if (!$osd_flags) {
- log_fail("unable to get Ceph OSD flags!");
- } else {
- if ($osd_flags =~ m/recovery_deletes/ && $osd_flags =~ m/purged_snapdirs/) {
- log_pass("all PGs have been scrubbed at least once while running Ceph Luminous.");
- } else {
- log_fail("missing 'recovery_deletes' and/or 'purged_snapdirs' flag, scrub of all PGs required before upgrading to Nautilus!");
- }
- }
- };
-
- log_info("getting Ceph daemon versions..");
- my $ceph_versions = eval { PVE::Ceph::Tools::get_cluster_versions(undef, 1); };
- if (!$ceph_versions) {
- log_fail("unable to determine Ceph daemon versions!");
- } else {
- my $services = [
- { 'key' => 'mon', 'name' => 'monitor' },
- { 'key' => 'mgr', 'name' => 'manager' },
- { 'key' => 'mds', 'name' => 'MDS' },
- { 'key' => 'osd', 'name' => 'OSD' },
- ];
-
- foreach my $service (@$services) {
- my $name = $service->{name};
- if (my $service_versions = $ceph_versions->{$service->{key}}) {
- if (keys %$service_versions == 0) {
- log_skip("no running instances detected for daemon type $name.");
- } elsif (keys %$service_versions == 1) {
- log_pass("single running version detected for daemon type $name.");
- } else {
- log_warn("multiple running versions detected for daemon type $name!");
- }
- } else {
- log_skip("unable to determine versions of running Ceph $name instances.");
- }
- }
-
- my $overall_versions = $ceph_versions->{overall};
- if (!$overall_versions) {
- log_warn("unable to determine overall Ceph daemon versions!");
- } elsif (keys %$overall_versions == 1) {
- log_pass("single running overall version detected for all Ceph daemon types.");
- if ((keys %$overall_versions)[0] =~ /^ceph version 14\./) {
- $noout_wanted = 0;
- }
- } else {
- log_warn("overall version mismatch detected, check 'ceph versions' output for details!");
- }
- }
-
- if ($noout) {
- if ($noout_wanted) {
- log_pass("'noout' flag set to prevent rebalancing during cluster-wide upgrades.");
- } else {
- log_warn("'noout' flag set, Ceph cluster upgrade seems finished.");
- }
- } elsif ($noout_wanted) {
- log_warn("'noout' flag not set - recommended to prevent rebalancing during upgrades.");
- }
-
- log_info("checking Ceph config..");
- my $conf = PVE::Cluster::cfs_read_file('ceph.conf');
- if (%$conf) {
- my $global = $conf->{global};
-
- my $global_monhost = $global->{mon_host} // $global->{"mon host"} // $global->{"mon-host"};
- if (!defined($global_monhost)) {
- log_warn("No 'mon_host' entry found in ceph config.\n It's recommended to add mon_host with all monitor addresses (without ports) to the global section.");
- } else {
- log_pass("Found 'mon_host' entry.");
- }
-
- my $ipv6 = $global->{ms_bind_ipv6} // $global->{"ms bind ipv6"} // $global->{"ms-bind-ipv6"};
- if ($ipv6) {
- my $ipv4 = $global->{ms_bind_ipv4} // $global->{"ms bind ipv4"} // $global->{"ms-bind-ipv4"};
- if ($ipv6 eq 'true' && (!defined($ipv4) || $ipv4 ne 'false')) {
- log_warn("'ms_bind_ipv6' is enabled but 'ms_bind_ipv4' is not disabled.\n Make sure to disable 'ms_bind_ipv4' for ipv6 only clusters, or add an ipv4 network to public/cluster network.");
- } else {
- log_pass("'ms_bind_ipv6' is enabled and 'ms_bind_ipv4' disabled");
- }
- } else {
- log_pass("'ms_bind_ipv6' not enabled");
- }
-
- if (defined($global->{keyring})) {
- log_warn("[global] config section contains 'keyring' option, which will prevent services from starting with Nautilus.\n Move 'keyring' option to [client] section instead.");
- } else {
- log_pass("no 'keyring' option in [global] section found.");
- }
-
- } else {
- log_warn("Empty ceph config found");
- }
-
- my $local_ceph_ver = PVE::Ceph::Tools::get_local_version(1);
- if (defined($local_ceph_ver)) {
- if ($local_ceph_ver == 14) {
- my $ceph_volume_osds = PVE::Ceph::Tools::ceph_volume_list();
- my $scanned_osds = PVE::Tools::dir_glob_regex('/etc/ceph/osd', '^.*\.json$');
- if (-e '/var/lib/ceph/osd/' && !defined($scanned_osds) && !(keys %$ceph_volume_osds)) {
- log_warn("local Ceph version is Nautilus, local OSDs detected, but no conversion from ceph-disk to ceph-volume done (yet).");
- }
- }
- } else {
- log_fail("unable to determine local Ceph version.");
- }
-}
-
-sub check_misc {
- print_header("MISCELLANEOUS CHECKS");
- my $ssh_config = eval { PVE::Tools::file_get_contents('/root/.ssh/config') };
- if (defined($ssh_config)) {
- log_fail("Unsupported SSH Cipher configured for root in /root/.ssh/config: $1")
- if $ssh_config =~ /^Ciphers .*(blowfish|arcfour|3des).*$/m;
- } else {
- log_skip("No SSH config file found.");
- }
-
- log_info("Checking common daemon services..");
- $log_systemd_unit_state->('pveproxy.service');
- $log_systemd_unit_state->('pvedaemon.service');
- $log_systemd_unit_state->('pvestatd.service');
-
- my $root_free = PVE::Tools::df('/', 10);
- log_warn("Less than 2G free space on root file system.")
- if defined($root_free) && $root_free->{avail} < 2*1024*1024*1024;
-
- log_info("Checking for running guests..");
- my $running_guests = 0;
-
- my $vms = eval { PVE::API2::Qemu->vmlist({ node => $nodename }) };
- log_warn("Failed to retrieve information about this node's VMs - $@") if $@;
- $running_guests += grep { $_->{status} eq 'running' } @$vms if defined($vms);
-
- my $cts = eval { PVE::API2::LXC->vmlist({ node => $nodename }) };
- log_warn("Failed to retrieve information about this node's CTs - $@") if $@;
- $running_guests += grep { $_->{status} eq 'running' } @$cts if defined($cts);
-
- if ($running_guests > 0) {
- log_warn("$running_guests running guest(s) detected - consider migrating or stopping them.")
- } else {
- log_pass("no running guest detected.")
- }
-
- log_info("Checking if the local node's hostname '$nodename' is resolvable..");
- my $local_ip = eval { PVE::Network::get_ip_from_hostname($nodename) };
- if ($@) {
- log_warn("Failed to resolve hostname '$nodename' to IP - $@");
- } else {
- log_info("Checking if resolved IP is configured on local node..");
- my $cidr = Net::IP::ip_is_ipv6($local_ip) ? "$local_ip/128" : "$local_ip/32";
- my $configured_ips = PVE::Network::get_local_ip_from_cidr($cidr);
- my $ip_count = scalar(@$configured_ips);
-
- if ($ip_count <= 0) {
- log_fail("Resolved node IP '$local_ip' not configured or active for '$nodename'");
- } elsif ($ip_count > 1) {
- log_warn("Resolved node IP '$local_ip' active on multiple ($ip_count) interfaces!");
- } else {
- log_pass("Resolved node IP '$local_ip' configured and active on single interface.");
- }
- }
-
- log_info("Check node certificate's RSA key size");
- my $certs = PVE::API2::Certificates->info({ node => $nodename });
- my $certs_check = {
- 'rsaEncryption' => {
- minsize => 2048,
- name => 'RSA',
- },
- 'id-ecPublicKey' => {
- minsize => 224,
- name => 'ECC',
- },
- };
-
- my $certs_check_failed = 0;
- foreach my $cert (@$certs) {
- my ($type, $size, $fn) = $cert->@{qw(public-key-type public-key-bits filename)};
-
- if (!defined($type) || !defined($size)) {
- log_warn("'$fn': cannot check certificate, failed to get it's type or size!");
- }
-
- my $check = $certs_check->{$type};
- if (!defined($check)) {
- log_warn("'$fn': certificate's public key type '$type' unknown, check Debian Busters release notes");
- next;
- }
-
- if ($size < $check->{minsize}) {
- log_fail("'$fn', certificate's $check->{name} public key size is less than 2048 bit");
- $certs_check_failed = 1;
- } else {
- log_pass("Certificate '$fn' passed Debian Busters security level for TLS connections ($size >= 2048)");
- }
- }
-
- check_kvm_nested();
-}
-
-__PACKAGE__->register_method ({
- name => 'checklist',
- path => 'checklist',
- method => 'GET',
- description => 'Check (pre-/post-)upgrade conditions.',
- parameters => {
- additionalProperties => 0,
- properties => {
- },
- },
- returns => { type => 'null' },
- code => sub {
- my ($param) = @_;
-
- check_pve_packages();
- check_cluster_corosync();
- check_ceph();
- check_storage_health();
- check_misc();
-
- print_header("SUMMARY");
-
- my $total = 0;
- $total += $_ for values %$counters;
-
- print "TOTAL: $total\n";
- print colored("PASSED: $counters->{pass}\n", 'green');
- print "SKIPPED: $counters->{skip}\n";
- print colored("WARNINGS: $counters->{warn}\n", 'yellow');
- print colored("FAILURES: $counters->{fail}\n", 'red');
-
- if ($counters->{warn} > 0 || $counters->{fail} > 0) {
- my $color = $counters->{fail} > 0 ? 'red' : 'yellow';
- print colored("\nATTENTION: Please check the output for detailed information!\n", $color);
- print colored("Try to solve the problems one at a time and then run this checklist tool again.\n", $color) if $counters->{fail} > 0;
- }
-
- return undef;
- }});
-
-our $cmddef = [ __PACKAGE__, 'checklist', [], {}];
-
-# for now drop all unknown params and just check
-@ARGV = ();
-
-1;