SUBDIRS = zfs zpool zdb zinject ztest zpios mount_zfs
-SUBDIRS += zpool_layout zvol_id zpool_id sas_switch_id
+SUBDIRS += zpool_layout zvol_id zpool_id vdev_id
udevdir = @udevdir@
udevruledir = @udevruledir@
SUBDIRS = zfs zpool zdb zinject ztest zpios mount_zfs zpool_layout \
- zvol_id zpool_id sas_switch_id
+ zvol_id zpool_id vdev_id
all: all-recursive
.SUFFIXES:
+++ /dev/null
-dist_udev_SCRIPTS = sas_switch_id
+++ /dev/null
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = cmd/sas_switch_id
-DIST_COMMON = $(dist_udev_SCRIPTS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
- $(top_srcdir)/config/kernel-automount.m4 \
- $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
- $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
- $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
- $(top_srcdir)/config/kernel-bdi.m4 \
- $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
- $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
- $(top_srcdir)/config/kernel-bio-failfast.m4 \
- $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
- $(top_srcdir)/config/kernel-blk-end-request.m4 \
- $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
- $(top_srcdir)/config/kernel-blk-queue-discard.m4 \
- $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
- $(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
- $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
- $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
- $(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
- $(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
- $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
- $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
- $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
- $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
- $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
- $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
- $(top_srcdir)/config/kernel-create-umode-t.m4 \
- $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
- $(top_srcdir)/config/kernel-evict-inode.m4 \
- $(top_srcdir)/config/kernel-fallocate.m4 \
- $(top_srcdir)/config/kernel-fmode-t.m4 \
- $(top_srcdir)/config/kernel-fsync.m4 \
- $(top_srcdir)/config/kernel-get-disk-ro.m4 \
- $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
- $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
- $(top_srcdir)/config/kernel-kobj-name-len.m4 \
- $(top_srcdir)/config/kernel-mount-nodev.m4 \
- $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
- $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
- $(top_srcdir)/config/kernel-rq-is_sync.m4 \
- $(top_srcdir)/config/kernel-security-inode-init.m4 \
- $(top_srcdir)/config/kernel-set-nlink.m4 \
- $(top_srcdir)/config/kernel-show-options.m4 \
- $(top_srcdir)/config/kernel-shrink.m4 \
- $(top_srcdir)/config/kernel-truncate-setsize.m4 \
- $(top_srcdir)/config/kernel-xattr-handler.m4 \
- $(top_srcdir)/config/kernel.m4 \
- $(top_srcdir)/config/user-arch.m4 \
- $(top_srcdir)/config/user-frame-larger-than.m4 \
- $(top_srcdir)/config/user-ioctl.m4 \
- $(top_srcdir)/config/user-libblkid.m4 \
- $(top_srcdir)/config/user-libuuid.m4 \
- $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
- $(top_srcdir)/config/user-selinux.m4 \
- $(top_srcdir)/config/user-udev.m4 \
- $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
- $(top_srcdir)/config/zfs-build.m4 \
- $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/zfs_config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(udevdir)"
-SCRIPTS = $(dist_udev_SCRIPTS)
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo " GEN " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALIEN = @ALIEN@
-ALIEN_VERSION = @ALIEN_VERSION@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASDEPMODE = @CCASDEPMODE@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEBUG_DMU_TX = @DEBUG_DMU_TX@
-DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
-DEBUG_ZFS = @DEBUG_ZFS@
-DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
-DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
-DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DPKG = @DPKG@
-DPKGBUILD = @DPKGBUILD@
-DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
-DPKG_VERSION = @DPKG_VERSION@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
-GREP = @GREP@
-HAVE_ALIEN = @HAVE_ALIEN@
-HAVE_DPKG = @HAVE_DPKG@
-HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
-HAVE_MAKEPKG = @HAVE_MAKEPKG@
-HAVE_PACMAN = @HAVE_PACMAN@
-HAVE_RPM = @HAVE_RPM@
-HAVE_RPMBUILD = @HAVE_RPMBUILD@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-KERNELCPPFLAGS = @KERNELCPPFLAGS@
-KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBBLKID = @LIBBLKID@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBSELINUX = @LIBSELINUX@
-LIBTOOL = @LIBTOOL@
-LIBUUID = @LIBUUID@
-LINUX = @LINUX@
-LINUX_OBJ = @LINUX_OBJ@
-LINUX_SYMBOLS = @LINUX_SYMBOLS@
-LINUX_VERSION = @LINUX_VERSION@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MAKEPKG = @MAKEPKG@
-MAKEPKG_VERSION = @MAKEPKG_VERSION@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PACMAN = @PACMAN@
-PACMAN_VERSION = @PACMAN_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-RPM = @RPM@
-RPMBUILD = @RPMBUILD@
-RPMBUILD_VERSION = @RPMBUILD_VERSION@
-RPM_VERSION = @RPM_VERSION@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPL = @SPL@
-SPL_OBJ = @SPL_OBJ@
-SPL_SYMBOLS = @SPL_SYMBOLS@
-SPL_VERSION = @SPL_VERSION@
-STRIP = @STRIP@
-TARGET_ASM_DIR = @TARGET_ASM_DIR@
-VENDOR = @VENDOR@
-VERSION = @VERSION@
-ZFS_CONFIG = @ZFS_CONFIG@
-ZFS_META_ALIAS = @ZFS_META_ALIAS@
-ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
-ZFS_META_DATA = @ZFS_META_DATA@
-ZFS_META_LICENSE = @ZFS_META_LICENSE@
-ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
-ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
-ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
-ZFS_META_NAME = @ZFS_META_NAME@
-ZFS_META_RELEASE = @ZFS_META_RELEASE@
-ZFS_META_VERSION = @ZFS_META_VERSION@
-ZLIB = @ZLIB@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevdir = @udevdir@
-udevruledir = @udevruledir@
-dist_udev_SCRIPTS = sas_switch_id
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/sas_switch_id/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu cmd/sas_switch_id/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_udevSCRIPTS: $(dist_udev_SCRIPTS)
- @$(NORMAL_INSTALL)
- test -z "$(udevdir)" || $(MKDIR_P) "$(DESTDIR)$(udevdir)"
- @list='$(dist_udev_SCRIPTS)'; test -n "$(udevdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(udevdir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(udevdir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-dist_udevSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_udev_SCRIPTS)'; test -n "$(udevdir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(udevdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(udevdir)" && rm -f $$files
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS)
-installdirs:
- for dir in "$(DESTDIR)$(udevdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_udevSCRIPTS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_udevSCRIPTS
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dist_udevSCRIPTS \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am uninstall uninstall-am uninstall-dist_udevSCRIPTS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#!/bin/sh
-#
-# sas_switch_id
-#
-# Callout script for multipathd to obtain disk UUIDs. Combine the UUID
-# from the scsi_id program with the SAS switch port number and enclosure
-# bay number, if available. This naming convention enables easier
-# identification of the physical drive location when multiple disk
-# enclosures are accessed via a SAS switch. For other storage
-# topologies just return the undecorated UUID of the drive.
-
-PHYS_PER_PORT=4
-DEV=
-
-usage() {
- cat << EOF
-Usage: sas_switch_id [-d disk] [-p phys_per_port]
- -d Basename of the disk device [default=none]
- -p Number of PHYs per switch port [default=${PHYS_PER_PORT}]
- -h Show this message
-EOF
- exit 0
-}
-
-while getopts 'd:p:h' OPTION; do
- case ${OPTION} in
- d)
- DEV=${OPTARG}
- ;;
- p)
- PHYS_PER_PORT=${OPTARG}
- ;;
- h)
- usage
- ;;
- esac
-done
-
-if [ -z "$DEV" ] ; then
- echo "Error: missing required option -d"
- exit 1
-fi
-
-UUID=`/lib/udev/scsi_id --whitelisted --device=/dev/$DEV`
-if [ $? != 0 -o -z "$UUID" ] ; then
- exit 1
-fi
-sys_path=`udevadm info -q path -p /sys/block/$DEV`
-dirs=(`echo "$sys_path" | tr / ' '`)
-switch_port_dir="/sys"
-
-# Get path up to /sys/.../hostX
-for (( i=0; i<${#dirs[*]}; i++ )); do
- d=${dirs[$i]}
- switch_port_dir=$switch_port_dir/$d
- echo $d | egrep -q -e '^host[0-9]+$' && break
-done
-
-if [ $i = ${#dirs[*]} ] ; then
- echo $UUID
- exit 0
-fi
-
-# The directory three levels beneath /sys/.../hostX contains
-# symlinks to phy devices that reveal the switch port number.
-# Lowest phy number is $PHYS_PER_PORT*switch_port_number.
-for (( j=(($i+1)) ; j<(($i+4)); j++ )); do
- switch_port_dir=$switch_port_dir/${dirs[$j]}
-done
-pushd $switch_port_dir > /dev/null
-PHY=`ls -d phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
-PORT=$(( $PHY / $PHYS_PER_PORT ))
-popd > /dev/null
-if [ -z "$PHY" ] ; then
- echo $UUID
- exit 0
-fi
-
-# Look in /sys/.../sas_device/end_device-X for the bay_identifier
-# attribute.
-end_device_dir=$switch_port_dir
-for (( k=$j ; k<${#dirs[*]} ; k++ )); do
- d=${dirs[$k]}
- end_device_dir=$end_device_dir/$d
- if echo $d | egrep -q -e '^end_device' ; then
- end_device_dir=$end_device_dir/sas_device/$d
- break
- fi
-done
-SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
-if [ -z "$SLOT" ] ; then
- echo $UUID
- exit 0
-fi
-
-echo "$UUID-switch-port:$PORT-slot:$SLOT"
--- /dev/null
+dist_udev_SCRIPTS = vdev_id
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = cmd/vdev_id
+DIST_COMMON = $(dist_udev_SCRIPTS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = \
+ $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
+ $(top_srcdir)/config/kernel-automount.m4 \
+ $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
+ $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
+ $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
+ $(top_srcdir)/config/kernel-bdi.m4 \
+ $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
+ $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
+ $(top_srcdir)/config/kernel-bio-failfast.m4 \
+ $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
+ $(top_srcdir)/config/kernel-blk-end-request.m4 \
+ $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-discard.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
+ $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
+ $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
+ $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
+ $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
+ $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
+ $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
+ $(top_srcdir)/config/kernel-create-umode-t.m4 \
+ $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
+ $(top_srcdir)/config/kernel-evict-inode.m4 \
+ $(top_srcdir)/config/kernel-fallocate.m4 \
+ $(top_srcdir)/config/kernel-fmode-t.m4 \
+ $(top_srcdir)/config/kernel-fsync.m4 \
+ $(top_srcdir)/config/kernel-get-disk-ro.m4 \
+ $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
+ $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
+ $(top_srcdir)/config/kernel-kobj-name-len.m4 \
+ $(top_srcdir)/config/kernel-mount-nodev.m4 \
+ $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
+ $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
+ $(top_srcdir)/config/kernel-rq-is_sync.m4 \
+ $(top_srcdir)/config/kernel-security-inode-init.m4 \
+ $(top_srcdir)/config/kernel-set-nlink.m4 \
+ $(top_srcdir)/config/kernel-show-options.m4 \
+ $(top_srcdir)/config/kernel-shrink.m4 \
+ $(top_srcdir)/config/kernel-truncate-setsize.m4 \
+ $(top_srcdir)/config/kernel-xattr-handler.m4 \
+ $(top_srcdir)/config/kernel.m4 \
+ $(top_srcdir)/config/user-arch.m4 \
+ $(top_srcdir)/config/user-frame-larger-than.m4 \
+ $(top_srcdir)/config/user-ioctl.m4 \
+ $(top_srcdir)/config/user-libblkid.m4 \
+ $(top_srcdir)/config/user-libuuid.m4 \
+ $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+ $(top_srcdir)/config/user-selinux.m4 \
+ $(top_srcdir)/config/user-udev.m4 \
+ $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
+ $(top_srcdir)/config/zfs-build.m4 \
+ $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/zfs_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(udevdir)"
+SCRIPTS = $(dist_udev_SCRIPTS)
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo " GEN " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALIEN = @ALIEN@
+ALIEN_VERSION = @ALIEN_VERSION@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_CFLAGS = @DEBUG_CFLAGS@
+DEBUG_DMU_TX = @DEBUG_DMU_TX@
+DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
+DEBUG_ZFS = @DEBUG_ZFS@
+DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
+DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
+DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DPKG = @DPKG@
+DPKGBUILD = @DPKGBUILD@
+DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
+DPKG_VERSION = @DPKG_VERSION@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
+GREP = @GREP@
+HAVE_ALIEN = @HAVE_ALIEN@
+HAVE_DPKG = @HAVE_DPKG@
+HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
+HAVE_MAKEPKG = @HAVE_MAKEPKG@
+HAVE_PACMAN = @HAVE_PACMAN@
+HAVE_RPM = @HAVE_RPM@
+HAVE_RPMBUILD = @HAVE_RPMBUILD@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KERNELCPPFLAGS = @KERNELCPPFLAGS@
+KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBBLKID = @LIBBLKID@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIBUUID = @LIBUUID@
+LINUX = @LINUX@
+LINUX_OBJ = @LINUX_OBJ@
+LINUX_SYMBOLS = @LINUX_SYMBOLS@
+LINUX_VERSION = @LINUX_VERSION@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAKEPKG = @MAKEPKG@
+MAKEPKG_VERSION = @MAKEPKG_VERSION@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACMAN = @PACMAN@
+PACMAN_VERSION = @PACMAN_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RPM = @RPM@
+RPMBUILD = @RPMBUILD@
+RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_VERSION = @RPM_VERSION@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SPL = @SPL@
+SPL_OBJ = @SPL_OBJ@
+SPL_SYMBOLS = @SPL_SYMBOLS@
+SPL_VERSION = @SPL_VERSION@
+STRIP = @STRIP@
+TARGET_ASM_DIR = @TARGET_ASM_DIR@
+VENDOR = @VENDOR@
+VERSION = @VERSION@
+ZFS_CONFIG = @ZFS_CONFIG@
+ZFS_META_ALIAS = @ZFS_META_ALIAS@
+ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
+ZFS_META_DATA = @ZFS_META_DATA@
+ZFS_META_LICENSE = @ZFS_META_LICENSE@
+ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
+ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
+ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
+ZFS_META_NAME = @ZFS_META_NAME@
+ZFS_META_RELEASE = @ZFS_META_RELEASE@
+ZFS_META_VERSION = @ZFS_META_VERSION@
+ZLIB = @ZLIB@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevdir = @udevdir@
+udevruledir = @udevruledir@
+dist_udev_SCRIPTS = vdev_id
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/vdev_id/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cmd/vdev_id/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-dist_udevSCRIPTS: $(dist_udev_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ test -z "$(udevdir)" || $(MKDIR_P) "$(DESTDIR)$(udevdir)"
+ @list='$(dist_udev_SCRIPTS)'; test -n "$(udevdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(udevdir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(udevdir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-dist_udevSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(dist_udev_SCRIPTS)'; test -n "$(udevdir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(udevdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(udevdir)" && rm -f $$files
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS)
+installdirs:
+ for dir in "$(DESTDIR)$(udevdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_udevSCRIPTS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_udevSCRIPTS
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dist_udevSCRIPTS \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am uninstall uninstall-am uninstall-dist_udevSCRIPTS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+#!/bin/bash
+#
+# vdev_id: udev helper to generate user-friendly names for JBOD disks
+#
+# This script parses the file /etc/zfs/vdev_id.conf to map a
+# physical path in a storage topology to a channel name. The
+# channel name is combined with a disk enclosure slot number to
+# create an alias that reflects the physical location of the drive.
+# This is particularly helpful when it comes to tasks like replacing
+# failed drives. Slot numbers may also be re-mapped in case the
+# default numbering is unsatisfactory. The drive aliases will be
+# created as symbolic links in /dev/disk/by-vdev.
+#
+# The only currently supported topologies are sas_direct and
+# sas_switch. A multipath mode is supported in which dm-mpath
+# devices are handled by examining the first-listed running
+# component disk. In multipath mode the configuration file
+# should contain a channel definition with the same name for
+# each path to a given enclosure.
+
+#
+# Some example configuration files are given below.
+
+# #
+# # Example vdev_id.conf - sas_direct.
+# #
+#
+# multipath no
+# topology sas_direct
+# phys_per_port 4
+#
+# # PCI_ID HBA PORT CHANNEL NAME
+# channel 85:00.0 1 A
+# channel 85:00.0 0 B
+# channel 86:00.0 1 C
+# channel 86:00.0 0 D
+#
+# # Linux Mapped
+# # Slot Slot
+# slot 1 7
+# slot 2 10
+# slot 3 3
+# slot 4 6
+# slot 5 2
+# slot 6 8
+# slot 7 1
+# slot 8 4
+# slot 9 9
+# slot 10 5
+
+# #
+# # Example vdev_id.conf - sas_switch
+# #
+#
+# topology sas_switch
+#
+# # SWITCH PORT CHANNEL NAME
+# channel 1 A
+# channel 2 B
+# channel 3 C
+# channel 4 D
+
+# #
+# # Example vdev_id.conf - multipath
+# #
+#
+# multipath yes
+#
+# # PCI_ID HBA PORT CHANNEL NAME
+# channel 85:00.0 1 A
+# channel 85:00.0 0 B
+# channel 86:00.0 1 A
+# channel 86:00.0 0 B
+
+PATH=/bin:/sbin:/usr/bin:/usr/sbin
+CONFIG=/etc/zfs/vdev_id.conf
+PHYS_PER_PORT=
+DEV=
+SLOT_MAP=
+CHANNEL_MAP=
+MULTIPATH=
+TOPOLOGY=
+declare -i i j
+
+usage() {
+ cat << EOF
+Usage: vdev_id [-h]
+ vdev_id <-d device> [-c config_file] [-p phys_per_port]
+ [-g sas_direct|sas_switch] [-m]
+
+ -c specify name of alernate config file [default=$CONFIG]
+ -d specify basename of device (i.e. sda)
+ -g Storage network topology [default="$TOPOLOGY"]
+ -m Run in multipath mode
+ -p number of phy's per switch port [default=$PHYS_PER_PORT]
+ -h show this summary
+EOF
+ exit 0
+}
+
+map_slot() {
+ local LINUX_SLOT=$1
+ local MAPPED_SLOT=
+
+ MAPPED_SLOT=`awk "/^slot / && \\$2 == ${LINUX_SLOT} \
+ { print \\$3; exit }" $CONFIG`
+ if [ -z "$MAPPED_SLOT" ] ; then
+ MAPPED_SLOT=$LINUX_SLOT
+ fi
+ printf "%d" ${MAPPED_SLOT}
+}
+
+map_channel() {
+ local MAPPED_CHAN=
+ local PCI_ID=$1
+ local PORT=$2
+
+ case $TOPOLOGY in
+ "sas_switch")
+ MAPPED_CHAN=`awk "/^channel / && \\$2 == ${PORT} \
+ { print \\$3; exit }" $CONFIG`
+ ;;
+ "sas_direct")
+ MAPPED_CHAN=`awk "/^channel / && \\$2 == \"${PCI_ID}\" && \
+ \\$3 == ${PORT} { print \\$4; exit }" \
+ $CONFIG`
+ ;;
+ esac
+ printf "%s" ${MAPPED_CHAN}
+}
+
+while getopts 'c:s:d:g:mp:h' OPTION; do
+ case ${OPTION} in
+ c)
+ CONFIG=`readlink -e ${OPTARG}`
+ ;;
+ d)
+ DEV=${OPTARG}
+ ;;
+ g)
+ TOPOLOGY=$OPTARG
+ ;;
+ p)
+ PHYS_PER_PORT=${OPTARG}
+ ;;
+ m)
+ MULTIPATH_MODE=yes
+ ;;
+ s)
+ SLOT_MAP=`readlink -e ${OPTARG}`
+ if [ ! -r $SLOT_MAP ] ; then
+ echo "Error: $SLOT_MAP is nonexistant or unreadable"
+ exit 1
+ fi
+ ;;
+ h)
+ usage
+ ;;
+ esac
+done
+
+if [ ! -r $CONFIG ] ; then
+ exit 0
+fi
+
+if [ -z "$DEV" ] ; then
+ echo "Error: missing required option -d"
+ exit 1
+fi
+
+if [ -z "$TOPOLOGY" ] ; then
+ TOPOLOGY=`awk "/^topology /{print \\$2; exit}" $CONFIG`
+fi
+TOPOLOGY=${TOPOLOGY:-sas_direct}
+case $TOPOLOGY in
+ sas_direct|sas_switch)
+ ;;
+ *)
+ echo "Error: unknown topology $TOPOLOGY"
+ exit 1
+ ;;
+esac
+
+if [ -z "$PHYS_PER_PORT" ] ; then
+ PHYS_PER_PORT=`awk "/^phys_per_port /{print \\$2; exit}" $CONFIG`
+fi
+PHYS_PER_PORT=${PHYS_PER_PORT:-4}
+if ! echo $PHYS_PER_PORT | egrep -q '^[0-9]+$' ; then
+ echo "Error: phys_per_port value $PHYS_PER_PORT is non-numeric"
+ exit 1
+fi
+
+if [ -z "$MULTIPATH_MODE" ] ; then
+ MULTIPATH_MODE=`awk "/^multipath /{print \\$2; exit}" $CONFIG`
+fi
+
+# Use first running component device if we're handling a dm-mpath device.
+if [ "$MULTIPATH_MODE" = "yes" ] ; then
+ # If udev didn't tell us the UUID via DM_NAME, find it in /dev/mapper
+ if [ -z "$DM_NAME" ] ; then
+ DM_NAME=`ls -l --full-time /dev/mapper |
+ awk "/\/$DEV$/{print \\$9}"`
+ fi
+
+ # For raw disks udev exports DEVTYPE=partition when handling partitions,
+ # and the rules can be written to take advantage of this to append a
+ # -part suffix. For dm devices we get DEVTYPE=disk even for partitions
+ # so we have to append the -part suffix directly in the helper.
+ if [ "$DEVTYPE" != "partition" ] ; then
+ PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
+ fi
+
+ # Strip off partition information.
+ DM_NAME=`echo $DM_NAME | sed 's/p[0-9][0-9]*$//'`
+ if [ -z "$DM_NAME" ] ; then
+ exit 0
+ fi
+
+ # Get the raw scsi device name from multipath -l.
+ DEV=`multipath -l $DM_NAME |awk '/running/{print $3 ; exit}'`
+ if [ -z "$DEV" ] ; then
+ exit 0
+ fi
+fi
+
+if echo $DEV | grep -q ^/devices/ ; then
+ sys_path=$DEV
+else
+ sys_path=`udevadm info -q path -p /sys/block/$DEV 2>/dev/null`
+fi
+
+dirs=(`echo "$sys_path" | tr / ' '`)
+scsi_host_dir="/sys"
+
+# Get path up to /sys/.../hostX
+for (( i=0; i<${#dirs[*]}; i++ )); do
+ d=${dirs[$i]}
+ scsi_host_dir="$scsi_host_dir/$d"
+ echo $d | egrep -q -e '^host[0-9]+$' && break
+done
+
+if [ $i = ${#dirs[*]} ] ; then
+ exit 0
+fi
+
+PCI_ID=`echo ${dirs[$(( $i - 1 ))]} | awk -F: '{print $2":"$3}'`
+
+# In sas_switch mode, the directory three levels beneath /sys/.../hostX
+# contains symlinks to phy devices that reveal the switch port number. In
+# sas_direct mode, the phy links one directory down reveal the HBA port.
+port_dir=$scsi_host_dir
+case $TOPOLOGY in
+ "sas_switch") j=$(($i+4)) ;;
+ "sas_direct") j=$(($i + 1)) ;;
+esac
+for (( i++; i<=$j; i++ )); do
+ port_dir="$port_dir/${dirs[$i]}"
+done
+
+PHY=`ls -d $port_dir/phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
+if [ -z "$PHY" ] ; then
+ exit 0
+fi
+PORT=$(( $PHY / $PHYS_PER_PORT ))
+
+# Look in /sys/.../sas_device/end_device-X for the bay_identifier
+# attribute.
+end_device_dir=$port_dir
+for (( ; i<${#dirs[*]} ; i++ )); do
+ d=${dirs[$i]}
+ end_device_dir="$end_device_dir/$d"
+ if echo $d | egrep -q -e '^end_device' ; then
+ end_device_dir="$end_device_dir/sas_device/$d"
+ break
+ fi
+done
+
+SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
+if [ -z "$SLOT" ] ; then
+ exit 0
+fi
+
+SLOT=`map_slot $SLOT`
+CHAN=`map_channel $PCI_ID $PORT`
+if [ -z "$CHAN" ] ; then
+ exit 0
+fi
+ID_VDEV=${CHAN}${SLOT}${PART}
+
+echo "ID_VDEV=${ID_VDEV}"
+echo "ID_VDEV_PATH=disk/by-vdev/${ID_VDEV}"
/*
* This may be a shorthand device path or it could be total gibberish.
* Check to see if it's a known device in /dev/, /dev/disk/by-id,
- * /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid, or
- * /dev/disk/zpool/. As part of this check, see if we've been given
- * an entire disk (minus the slice number).
+ * /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid,
+ * /dev/disk/by-vdev, or /dev/disk/zpool/. As part of this check, see
+ * if we've been given an entire disk (minus the slice number).
*/
static int
is_shorthand_path(const char *arg, char *path,
$as_echo "$enable_debug_dmu_tx" >&6; }
-ac_config_files="$ac_config_files Makefile dracut/Makefile dracut/90zfs/Makefile udev/Makefile udev/rules.d/Makefile etc/Makefile etc/init.d/Makefile etc/zfs/Makefile man/Makefile man/man8/Makefile lib/Makefile lib/libspl/Makefile lib/libspl/asm-generic/Makefile lib/libspl/asm-i386/Makefile lib/libspl/asm-x86_64/Makefile lib/libspl/include/Makefile lib/libspl/include/ia32/Makefile lib/libspl/include/ia32/sys/Makefile lib/libspl/include/rpc/Makefile lib/libspl/include/sys/Makefile lib/libspl/include/sys/sysevent/Makefile lib/libspl/include/sys/dktp/Makefile lib/libspl/include/util/Makefile lib/libavl/Makefile lib/libefi/Makefile lib/libnvpair/Makefile lib/libunicode/Makefile lib/libuutil/Makefile lib/libzpool/Makefile lib/libzfs/Makefile lib/libshare/Makefile cmd/Makefile cmd/zdb/Makefile cmd/zfs/Makefile cmd/zinject/Makefile cmd/zpool/Makefile cmd/ztest/Makefile cmd/zpios/Makefile cmd/mount_zfs/Makefile cmd/zpool_layout/Makefile cmd/zvol_id/Makefile cmd/zpool_id/Makefile cmd/sas_switch_id/Makefile module/Makefile module/avl/Makefile module/nvpair/Makefile module/unicode/Makefile module/zcommon/Makefile module/zfs/Makefile module/zpios/Makefile include/Makefile include/linux/Makefile include/sys/Makefile include/sys/fs/Makefile include/sys/fm/Makefile include/sys/fm/fs/Makefile scripts/Makefile scripts/zpios-profile/Makefile scripts/zpios-test/Makefile scripts/zpool-config/Makefile scripts/zpool-layout/Makefile scripts/common.sh zfs.spec zfs-modules.spec PKGBUILD-zfs PKGBUILD-zfs-modules zfs-script-config.sh"
+ac_config_files="$ac_config_files Makefile dracut/Makefile dracut/90zfs/Makefile udev/Makefile udev/rules.d/Makefile etc/Makefile etc/init.d/Makefile etc/zfs/Makefile man/Makefile man/man5/Makefile man/man8/Makefile lib/Makefile lib/libspl/Makefile lib/libspl/asm-generic/Makefile lib/libspl/asm-i386/Makefile lib/libspl/asm-x86_64/Makefile lib/libspl/include/Makefile lib/libspl/include/ia32/Makefile lib/libspl/include/ia32/sys/Makefile lib/libspl/include/rpc/Makefile lib/libspl/include/sys/Makefile lib/libspl/include/sys/sysevent/Makefile lib/libspl/include/sys/dktp/Makefile lib/libspl/include/util/Makefile lib/libavl/Makefile lib/libefi/Makefile lib/libnvpair/Makefile lib/libunicode/Makefile lib/libuutil/Makefile lib/libzpool/Makefile lib/libzfs/Makefile lib/libshare/Makefile cmd/Makefile cmd/zdb/Makefile cmd/zfs/Makefile cmd/zinject/Makefile cmd/zpool/Makefile cmd/ztest/Makefile cmd/zpios/Makefile cmd/mount_zfs/Makefile cmd/zpool_layout/Makefile cmd/zvol_id/Makefile cmd/zpool_id/Makefile cmd/vdev_id/Makefile module/Makefile module/avl/Makefile module/nvpair/Makefile module/unicode/Makefile module/zcommon/Makefile module/zfs/Makefile module/zpios/Makefile include/Makefile include/linux/Makefile include/sys/Makefile include/sys/fs/Makefile include/sys/fm/Makefile include/sys/fm/fs/Makefile scripts/Makefile scripts/zpios-profile/Makefile scripts/zpios-test/Makefile scripts/zpool-config/Makefile scripts/zpool-layout/Makefile scripts/common.sh zfs.spec zfs-modules.spec PKGBUILD-zfs PKGBUILD-zfs-modules zfs-script-config.sh"
cat >confcache <<\_ACEOF
"etc/init.d/Makefile") CONFIG_FILES="$CONFIG_FILES etc/init.d/Makefile" ;;
"etc/zfs/Makefile") CONFIG_FILES="$CONFIG_FILES etc/zfs/Makefile" ;;
"man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
+ "man/man5/Makefile") CONFIG_FILES="$CONFIG_FILES man/man5/Makefile" ;;
"man/man8/Makefile") CONFIG_FILES="$CONFIG_FILES man/man8/Makefile" ;;
"lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
"lib/libspl/Makefile") CONFIG_FILES="$CONFIG_FILES lib/libspl/Makefile" ;;
"cmd/zpool_layout/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/zpool_layout/Makefile" ;;
"cmd/zvol_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/zvol_id/Makefile" ;;
"cmd/zpool_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/zpool_id/Makefile" ;;
- "cmd/sas_switch_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/sas_switch_id/Makefile" ;;
+ "cmd/vdev_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/vdev_id/Makefile" ;;
"module/Makefile") CONFIG_FILES="$CONFIG_FILES module/Makefile" ;;
"module/avl/Makefile") CONFIG_FILES="$CONFIG_FILES module/avl/Makefile" ;;
"module/nvpair/Makefile") CONFIG_FILES="$CONFIG_FILES module/nvpair/Makefile" ;;
etc/init.d/Makefile
etc/zfs/Makefile
man/Makefile
+ man/man5/Makefile
man/man8/Makefile
lib/Makefile
lib/libspl/Makefile
cmd/zpool_layout/Makefile
cmd/zvol_id/Makefile
cmd/zpool_id/Makefile
- cmd/sas_switch_id/Makefile
+ cmd/vdev_id/Makefile
module/Makefile
module/avl/Makefile
module/nvpair/Makefile
pkgsysconfdir = $(sysconfdir)/zfs
pkgsysconf_DATA = \
+ vdev_id.conf.sas_direct.example \
+ vdev_id.conf.sas_switch.example \
+ vdev_id.conf.multipath.example \
zdev.conf \
zdev.conf.supermicro.example \
zdev.conf.dragon.example \
udevruledir = @udevruledir@
pkgsysconfdir = $(sysconfdir)/zfs
pkgsysconf_DATA = \
+ vdev_id.conf.sas_direct.example \
+ vdev_id.conf.sas_switch.example \
+ vdev_id.conf.multipath.example \
zdev.conf \
zdev.conf.supermicro.example \
zdev.conf.dragon.example \
--- /dev/null
+multipath yes
+
+# PCI_ID HBA PORT CHANNEL NAME
+channel 85:00.0 1 A
+channel 85:00.0 0 B
+channel 86:00.0 1 A
+channel 86:00.0 0 B
--- /dev/null
+multipath no
+topology sas_direct
+phys_per_port 4
+
+# PCI_ID HBA PORT CHANNEL NAME
+channel 85:00.0 1 A
+channel 85:00.0 0 B
+channel 86:00.0 1 C
+channel 86:00.0 0 D
+
+# Linux Mapped
+# Slot Slot
+slot 1 7
+slot 2 10
+slot 3 3
+slot 4 6
+slot 5 2
+slot 6 8
+slot 7 1
+slot 8 4
+slot 9 9
+slot 10 5
--- /dev/null
+topology sas_switch
+
+# SWITCH PORT CHANNEL NAME
+channel 1 A
+channel 2 B
+channel 3 C
+channel 4 D
zfs_resolve_shortname(const char *name, char *path, size_t pathlen)
{
int i, err;
- char dirs[5][9] = {"by-id", "by-label", "by-path", "by-uuid", "zpool"};
+ char dirs[6][9] = {"by-id", "by-label", "by-path", "by-uuid", "zpool",
+ "by-vdev"};
(void) snprintf(path, pathlen, "%s/%s", DISK_ROOT, name);
err = access(path, F_OK);
- for (i = 0; i < 5 && err < 0; i++) {
+ for (i = 0; i < 6 && err < 0; i++) {
(void) snprintf(path, pathlen, "%s/%s/%s",
UDISK_ROOT, dirs[i], name);
err = access(path, F_OK);
-SUBDIRS = man8
+SUBDIRS = man5 man8
top_srcdir = @top_srcdir@
udevdir = @udevdir@
udevruledir = @udevruledir@
-SUBDIRS = man8
+SUBDIRS = man5 man8
all: all-recursive
.SUFFIXES:
--- /dev/null
+man_MANS = vdev_id.conf.5
+EXTRA_DIST = $(man_MANS)
+
+install-data-local:
+ $(INSTALL) -d -m 0755 "$(DESTDIR)$(mandir)/man5"
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = man/man5
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = \
+ $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
+ $(top_srcdir)/config/kernel-automount.m4 \
+ $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
+ $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
+ $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
+ $(top_srcdir)/config/kernel-bdi.m4 \
+ $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
+ $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
+ $(top_srcdir)/config/kernel-bio-failfast.m4 \
+ $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
+ $(top_srcdir)/config/kernel-blk-end-request.m4 \
+ $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-discard.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
+ $(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
+ $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
+ $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
+ $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
+ $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
+ $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
+ $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
+ $(top_srcdir)/config/kernel-create-umode-t.m4 \
+ $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
+ $(top_srcdir)/config/kernel-evict-inode.m4 \
+ $(top_srcdir)/config/kernel-fallocate.m4 \
+ $(top_srcdir)/config/kernel-fmode-t.m4 \
+ $(top_srcdir)/config/kernel-fsync.m4 \
+ $(top_srcdir)/config/kernel-get-disk-ro.m4 \
+ $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
+ $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
+ $(top_srcdir)/config/kernel-kobj-name-len.m4 \
+ $(top_srcdir)/config/kernel-mount-nodev.m4 \
+ $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
+ $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
+ $(top_srcdir)/config/kernel-rq-is_sync.m4 \
+ $(top_srcdir)/config/kernel-security-inode-init.m4 \
+ $(top_srcdir)/config/kernel-set-nlink.m4 \
+ $(top_srcdir)/config/kernel-show-options.m4 \
+ $(top_srcdir)/config/kernel-shrink.m4 \
+ $(top_srcdir)/config/kernel-truncate-setsize.m4 \
+ $(top_srcdir)/config/kernel-xattr-handler.m4 \
+ $(top_srcdir)/config/kernel.m4 \
+ $(top_srcdir)/config/user-arch.m4 \
+ $(top_srcdir)/config/user-frame-larger-than.m4 \
+ $(top_srcdir)/config/user-ioctl.m4 \
+ $(top_srcdir)/config/user-libblkid.m4 \
+ $(top_srcdir)/config/user-libuuid.m4 \
+ $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+ $(top_srcdir)/config/user-selinux.m4 \
+ $(top_srcdir)/config/user-udev.m4 \
+ $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
+ $(top_srcdir)/config/zfs-build.m4 \
+ $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/zfs_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo " GEN " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man5dir = $(mandir)/man5
+am__installdirs = "$(DESTDIR)$(man5dir)"
+NROFF = nroff
+MANS = $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALIEN = @ALIEN@
+ALIEN_VERSION = @ALIEN_VERSION@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_CFLAGS = @DEBUG_CFLAGS@
+DEBUG_DMU_TX = @DEBUG_DMU_TX@
+DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
+DEBUG_ZFS = @DEBUG_ZFS@
+DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
+DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
+DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DPKG = @DPKG@
+DPKGBUILD = @DPKGBUILD@
+DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
+DPKG_VERSION = @DPKG_VERSION@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
+GREP = @GREP@
+HAVE_ALIEN = @HAVE_ALIEN@
+HAVE_DPKG = @HAVE_DPKG@
+HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
+HAVE_MAKEPKG = @HAVE_MAKEPKG@
+HAVE_PACMAN = @HAVE_PACMAN@
+HAVE_RPM = @HAVE_RPM@
+HAVE_RPMBUILD = @HAVE_RPMBUILD@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KERNELCPPFLAGS = @KERNELCPPFLAGS@
+KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBBLKID = @LIBBLKID@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIBUUID = @LIBUUID@
+LINUX = @LINUX@
+LINUX_OBJ = @LINUX_OBJ@
+LINUX_SYMBOLS = @LINUX_SYMBOLS@
+LINUX_VERSION = @LINUX_VERSION@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAKEPKG = @MAKEPKG@
+MAKEPKG_VERSION = @MAKEPKG_VERSION@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACMAN = @PACMAN@
+PACMAN_VERSION = @PACMAN_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RPM = @RPM@
+RPMBUILD = @RPMBUILD@
+RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_VERSION = @RPM_VERSION@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SPL = @SPL@
+SPL_OBJ = @SPL_OBJ@
+SPL_SYMBOLS = @SPL_SYMBOLS@
+SPL_VERSION = @SPL_VERSION@
+STRIP = @STRIP@
+TARGET_ASM_DIR = @TARGET_ASM_DIR@
+VENDOR = @VENDOR@
+VERSION = @VERSION@
+ZFS_CONFIG = @ZFS_CONFIG@
+ZFS_META_ALIAS = @ZFS_META_ALIAS@
+ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
+ZFS_META_DATA = @ZFS_META_DATA@
+ZFS_META_LICENSE = @ZFS_META_LICENSE@
+ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
+ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
+ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
+ZFS_META_NAME = @ZFS_META_NAME@
+ZFS_META_RELEASE = @ZFS_META_RELEASE@
+ZFS_META_VERSION = @ZFS_META_VERSION@
+ZLIB = @ZLIB@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevdir = @udevdir@
+udevruledir = @udevruledir@
+man_MANS = vdev_id.conf.5
+EXTRA_DIST = $(man_MANS)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/man5/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu man/man5/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man5: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
+ @list=''; test -n "$(man5dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.5[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man5:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man5dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.5[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man5dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man5dir)" && rm -f $$files; }
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(man5dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man5
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man5
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-data-local install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man5 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am uninstall uninstall-am uninstall-man uninstall-man5
+
+
+install-data-local:
+ $(INSTALL) -d -m 0755 "$(DESTDIR)$(mandir)/man5"
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+.TH vdev_id.conf 5
+.SH NAME
+vdev_id.conf \- Configuration file for vdev_id
+.SH DESCRIPTION
+.I vdev_id.conf
+is the configuration file for
+.BR vdev_id (8).
+It controls the default behavior of
+.BR vdev_id (8)
+while it is mapping a disk device name to an alias.
+.PP
+The
+.I vdev_id.conf
+file uses a simple format consisting of a keyword followed by one or
+more values on a single line. Any line not beginning with a recognized
+keyword is ignored. Comments may optionally begin with a hash
+character.
+
+The following keywords and values are used.
+.TP
+\fIchannel\fR [pci_slot] <port> <name>
+Maps a physical path to a channel name (typically representing a single
+disk enclosure).
+
+\fIpci_slot\fR - specifies the PCI SLOT of the HBA
+hosting the disk enclosure being mapped, as found in the output of
+.BR lspci (8).
+This argument is not used in sas_switch mode.
+
+\fIport\fR - specifies the numeric identifier of the HBA or SAS switch port
+connected to the disk enclosure being mapped.
+
+\fIname\fR - specifies the name of the channel.
+
+.TP
+\fIslot\fR <old> <new>
+Maps a disk slot number as reported by the operating system
+to an alternative slot number.
+.TP
+\fImultipath\fR <yes|no>
+Specifies whether
+.BR vdev_id (8)
+will handle only dm-multipath devices. If set to "yes" then
+.BR vdev_id (8)
+will examine the first running component disk of a dm-multipath
+device as listed by the
+.BR multipath (8)
+command to determine the physical path.
+.TP
+\fItopology\fR <sas_direct|sas_switch>
+Identifies a physical topology that governs how physical paths are
+mapped to channels.
+
+\fIsas_direct\fR - in this mode a channel is uniquely identified by
+a PCI slot and a HBA port number
+
+\fIsas_switch\fR - in this mode a channel is uniquely identified by
+a SAS switch port number
+
+.TP
+\fIphys_per_port\fR <num>
+Specifies the number of PHY devices are associated with a SAS HBA port or SAS
+switch port.
+.BR vdev_id (8)
+internally uses this value to determine which HBA or switch port a
+device is connected to. The default is 4.
+.SH EXAMPLES
+A non-multipath configuration with direct-attached SAS enclosures and an
+arbitrary slot re-mapping.
+.P
+ multipath no
+.br
+ topology sas_direct
+.br
+ phys_per_port 4
+.br
+
+.br
+ # PCI_SLOT HBA PORT CHANNEL NAME
+.br
+ channel 85:00.0 1 A
+.br
+ channel 85:00.0 0 B
+.br
+ channel 86:00.0 1 C
+.br
+ channel 86:00.0 0 D
+.br
+
+.br
+ # Linux Mapped
+.br
+ # Slot Slot
+.br
+ slot 1 7
+.br
+ slot 2 10
+.br
+ slot 3 3
+.br
+ slot 4 6
+.br
+ slot 5 2
+.br
+ slot 6 8
+.br
+ slot 7 1
+.br
+ slot 8 4
+.br
+ slot 9 9
+.br
+ slot 10 5
+.br
+.P
+A SAS-switch topology. Note that the
+.I channel
+keyword takes only two arguments in this example.
+.P
+ topology sas_switch
+.br
+
+.br
+ # SWITCH PORT CHANNEL NAME
+.br
+ channel 1 A
+.br
+ channel 2 B
+.br
+ channel 3 C
+.br
+ channel 4 D
+.br
+.P
+A multipath configuration. Note that channel names have multiple
+definitions - one per physical path.
+.P
+ multipath yes
+.br
+
+.br
+ # PCI_SLOT HBA PORT CHANNEL NAME
+.br
+ channel 85:00.0 1 A
+.br
+ channel 85:00.0 0 B
+.br
+ channel 86:00.0 1 A
+.br
+ channel 86:00.0 0 B
+.br
+.P
+
+.SH FILES
+.TP
+.I /etc/zfs/vdev_id.conf
+The configuration file for
+.BR vdev_id (8).
+.SH SEE ALSO
+.BR vdev_id (8)
-man_MANS = zdb.8 zfs.8 zpool.8
+man_MANS = vdev_id.8 zdb.8 zfs.8 zpool.8
EXTRA_DIST = $(man_MANS)
install-data-local:
top_srcdir = @top_srcdir@
udevdir = @udevdir@
udevruledir = @udevruledir@
-man_MANS = zdb.8 zfs.8 zpool.8
+man_MANS = vdev_id.8 zdb.8 zfs.8 zpool.8
EXTRA_DIST = $(man_MANS)
all: all-am
--- /dev/null
+.TH vdev_id 8
+.SH NAME
+vdev_id \- generate user-friendly names for JBOD disks
+.SH SYNOPSIS
+.LP
+.nf
+\fBvdev_id\fR <-d dev> [-c config_file] [-g sas_direct|sas_switch]
+ [-m] [-p phys_per_port]
+\fBvdev_id\fR -h
+.fi
+.SH DESCRIPTION
+The \fBvdev_id\fR command is a udev helper which parses the file
+.BR /etc/zfs/vdev_id.conf (5)
+to map a physical path in a storage topology to a channel name. The
+channel name is combined with a disk enclosure slot number to create an
+alias that reflects the physical location of the drive. This is
+particularly helpful when it comes to tasks like replacing failed
+drives. Slot numbers may also be re-mapped in case the default
+numbering is unsatisfactory. The drive aliases will be created as
+symbolic links in /dev/disk/by-vdev.
+
+The only currently supported topologies are sas_direct and
+sas_switch. A multipath mode is supported in which dm-mpath
+devices are handled by examining the first-listed running
+component disk as reported by the
+.BR multipath (8)
+command. In multipath mode the configuration file should contain a
+channel definition with the same name for each path to a given
+enclosure.
+
+.SH OPTIONS
+.TP
+\fB\-c\fR <config_file>
+Specifies the path to an alternate configuration file. The default is
+/etc/zfs/vdev_id.conf.
+.TP
+\fB\-d\fR <device>
+This is the only mandatory argument. Specifies the name of a device
+in /dev, i.e. "sda".
+.TP
+\fB\-g\fR <sas_direct|sas_switch>
+Identifies a physical topology that governs how physical paths are
+mapped to channels.
+
+\fIsas_direct\fR - in this mode a channel is uniquely identified by
+a PCI slot and a HBA port number
+
+\fIsas_switch\fR - in this mode a channel is uniquely identified by
+a SAS switch port number
+.TP
+\fB\-m\fR
+Specifies that
+.BR vdev_id (8)
+will handle only dm-multipath devices. If set to "yes" then
+.BR vdev_id (8)
+will examine the first running component disk of a dm-multipath
+device as listed by the
+.BR multipath (8)
+command to determine the physical path.
+.TP
+\fB\-p\fR <phys_per_port>
+Specifies the number of PHY devices associated with a SAS HBA port or SAS
+switch port.
+.BR vdev_id (8)
+internally uses this value to determine which HBA or switch port a
+device is connected to. The default is 4.
+.TP
+\fB\-h\fR
+Print a usage summary.
+.SH SEE ALSO
+.LP
+\fBvdev_id.conf\fR(5)
--- /dev/null
+#
+# /lib/udev/rules.d/60-vdev.rules
+#
+
+ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/vdev_id -d %k"
+
+KERNEL=="*[!0-9]", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
+KERNEL=="*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="partition", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}-part%n"
+KERNEL=="dm-[0-9]*", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
udevrule_DATA = \
+ $(top_srcdir)/udev/rules.d/60-vdev.rules \
$(top_srcdir)/udev/rules.d/60-zpool.rules \
$(top_srcdir)/udev/rules.d/60-zvol.rules \
$(top_srcdir)/udev/rules.d/90-zfs.rules
EXTRA_DIST = \
+ $(top_srcdir)/udev/rules.d/60-vdev.rules.in \
$(top_srcdir)/udev/rules.d/60-zpool.rules.in \
$(top_srcdir)/udev/rules.d/60-zvol.rules.in \
$(top_srcdir)/udev/rules.d/90-zfs.rules.in
udevdir = @udevdir@
udevruledir = @udevruledir@
udevrule_DATA = \
+ $(top_srcdir)/udev/rules.d/60-vdev.rules \
$(top_srcdir)/udev/rules.d/60-zpool.rules \
$(top_srcdir)/udev/rules.d/60-zvol.rules \
$(top_srcdir)/udev/rules.d/90-zfs.rules
EXTRA_DIST = \
+ $(top_srcdir)/udev/rules.d/60-vdev.rules.in \
$(top_srcdir)/udev/rules.d/60-zpool.rules.in \
$(top_srcdir)/udev/rules.d/60-zvol.rules.in \
$(top_srcdir)/udev/rules.d/90-zfs.rules.in
%{_sbindir}/*
%{_bindir}/*
%{_libdir}/*
+%{_mandir}/man5/*
%{_mandir}/man8/*
%{_sysconfdir}/init.d/*
%{_sysconfdir}/zfs/*
projects / mirror_zfs-debian.git / commitdiff