]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/commitdiff
[media] cx23855: add support for DVBSky T980C (no CI support)
authorOlli Salonen <olli.salonen@iki.fi>
Mon, 29 Sep 2014 07:44:16 +0000 (04:44 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Thu, 30 Oct 2014 13:46:04 +0000 (11:46 -0200)
This patch adds basic support for DVBSky T980C card. CI interface is not supported.

DVBSky T980C is a PCIe card with the following components:
- CX23885 PCIe bridge
- Si2168-A20 demodulator
- Si2158-A20 tuner
- CIMaX SP2 CI chip

The demodulator and tuner need firmware. They're the same as used with TT CT2-4650 CI:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg78033.html

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/pci/cx23885/cx23885-cards.c
drivers/media/pci/cx23885/cx23885-dvb.c
drivers/media/pci/cx23885/cx23885.h

index 88c257d1161b1629294150e9bb9bc49bf887f52e..e8965e63eb09f53b01fac98282b99ad481949021 100644 (file)
@@ -680,6 +680,10 @@ struct cx23885_board cx23885_boards[] = {
                .portb          = CX23885_MPEG_DVB,
                .portc          = CX23885_MPEG_DVB,
        },
+       [CX23885_BOARD_DVBSKY_T980C] = {
+               .name           = "DVBSky T980C",
+               .portb          = CX23885_MPEG_DVB,
+       },
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -939,6 +943,10 @@ struct cx23885_subid cx23885_subids[] = {
                .subvendor = 0x4254,
                .subdevice = 0x9580,
                .card      = CX23885_BOARD_DVBSKY_T9580,
+       }, {
+               .subvendor = 0x4254,
+               .subdevice = 0x980c,
+               .card      = CX23885_BOARD_DVBSKY_T980C,
        },
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1541,6 +1549,36 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
                mdelay(100);
                cx23885_gpio_set(dev, GPIO_2 | GPIO_11);
                break;
+       case CX23885_BOARD_DVBSKY_T980C:
+               /*
+                * GPIO-0 INTA from CiMax, input
+                * GPIO-1 reset CiMax, output, high active
+                * GPIO-2 reset demod, output, low active
+                * GPIO-3 to GPIO-10 data/addr for CAM
+                * GPIO-11 ~CS0 to CiMax1
+                * GPIO-12 ~CS1 to CiMax2
+                * GPIO-13 ADL0 load LSB addr
+                * GPIO-14 ADL1 load MSB addr
+                * GPIO-15 ~RDY from CiMax
+                * GPIO-17 ~RD to CiMax
+                * GPIO-18 ~WR to CiMax
+                */
+
+               cx_set(GP0_IO, 0x00060002); /* GPIO 1/2 as output */
+               cx_clear(GP0_IO, 0x00010004); /* GPIO 0 as input */
+               mdelay(100); /* reset delay */
+               cx_set(GP0_IO, 0x00060004); /* GPIO as out, reset high */
+               cx_clear(GP0_IO, 0x00010002);
+               cx_write(MC417_CTL, 0x00000037); /* enable GPIO3-18 pins */
+
+               /* GPIO-15 IN as ~ACK, rest as OUT */
+               cx_write(MC417_OEN, 0x00001000);
+
+               /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
+               cx_write(MC417_RWD, 0x0000c300);
+
+               /* enable irq */
+               cx_write(GPIO_ISM, 0x00000000); /* INTERRUPTS active low */
        }
 }
 
@@ -1817,6 +1855,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
        case CX23885_BOARD_TEVII_S471:
        case CX23885_BOARD_DVBWORLD_2005:
        case CX23885_BOARD_PROF_8000:
+       case CX23885_BOARD_DVBSKY_T980C:
                ts1->gen_ctrl_val  = 0x5; /* Parallel */
                ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
                ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
@@ -1935,6 +1974,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
        case CX23885_BOARD_TBS_6980:
        case CX23885_BOARD_TBS_6981:
        case CX23885_BOARD_DVBSKY_T9580:
+       case CX23885_BOARD_DVBSKY_T980C:
                dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
                                &dev->i2c_bus[2].i2c_adap,
                                "cx25840", 0x88 >> 1, NULL);
index 4cb90317ff45c2bd1b5b57f5b6e0024c3b8bc29b..062854d30a75357b9a24cf652c9cbc615cea04e6 100644 (file)
@@ -1680,6 +1680,52 @@ static int dvb_register(struct cx23885_tsport *port)
                        break;
                }
                break;
+       case CX23885_BOARD_DVBSKY_T980C:
+               i2c_bus = &dev->i2c_bus[1];
+
+               /* attach frontend */
+               memset(&si2168_config, 0, sizeof(si2168_config));
+               si2168_config.i2c_adapter = &adapter;
+               si2168_config.fe = &fe0->dvb.frontend;
+               si2168_config.ts_mode = SI2168_TS_PARALLEL;
+               memset(&info, 0, sizeof(struct i2c_board_info));
+               strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+               info.addr = 0x64;
+               info.platform_data = &si2168_config;
+               request_module(info.type);
+               client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+               if (client_demod == NULL ||
+                               client_demod->dev.driver == NULL)
+                       goto frontend_detach;
+               if (!try_module_get(client_demod->dev.driver->owner)) {
+                       i2c_unregister_device(client_demod);
+                       goto frontend_detach;
+               }
+               port->i2c_client_demod = client_demod;
+
+               /* attach tuner */
+               memset(&si2157_config, 0, sizeof(si2157_config));
+               si2157_config.fe = fe0->dvb.frontend;
+               memset(&info, 0, sizeof(struct i2c_board_info));
+               strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+               info.addr = 0x60;
+               info.platform_data = &si2157_config;
+               request_module(info.type);
+               client_tuner = i2c_new_device(adapter, &info);
+               if (client_tuner == NULL ||
+                               client_tuner->dev.driver == NULL) {
+                       module_put(client_demod->dev.driver->owner);
+                       i2c_unregister_device(client_demod);
+                       goto frontend_detach;
+               }
+               if (!try_module_get(client_tuner->dev.driver->owner)) {
+                       i2c_unregister_device(client_tuner);
+                       module_put(client_demod->dev.driver->owner);
+                       i2c_unregister_device(client_demod);
+                       goto frontend_detach;
+               }
+               port->i2c_client_tuner = client_tuner;
+               break;
        default:
                printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
                        " isn't supported yet\n",
@@ -1770,6 +1816,21 @@ static int dvb_register(struct cx23885_tsport *port)
                        (port->nr-1) * 8, 6);
                break;
                }
+       case CX23885_BOARD_DVBSKY_T980C: {
+               u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+               if (port->nr != 1)
+                       break;
+
+               /* Read entire EEPROM */
+               dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+               tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
+                               sizeof(eeprom));
+               printk(KERN_INFO "DVBSky T980C MAC address: %pM\n",
+                       eeprom + 0xc0);
+               memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6);
+               break;
+               }
        }
 
        return ret;
index 6c35e61159696ad4be7ee930d42a74e4636b98a1..33b1e26847a287734bddd07672ea3ae96ca71b40 100644 (file)
@@ -93,6 +93,7 @@
 #define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE     43
 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
 #define CX23885_BOARD_DVBSKY_T9580             45
+#define CX23885_BOARD_DVBSKY_T980C             46
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002