babeld: Replace the babeld.conf.sample file by one that actually works.

diff --git a/babeld/babeld.conf.sample b/babeld/babeld.conf.sample
index bb2c1dbb08cf2f4d51a09fe4f53d9f51d5344fcd..e1585c1da8f85b7e696b8c8caf70a734cb2c2fcc 100644 (file)
--- a/babeld/babeld.conf.sample
+++ b/babeld/babeld.conf.sample
@@ -1,31 +1,13 @@
-# placeholder
-# This is an example. See documentation for more results.
-# 
-# let 'eth0' be an interface.
-#
-# Remark: '#' and '!' are comments.
-# NB, just for this example:
-#      each line at the same indentation is only dependant of the less level
-#      line. BUT the quagga parser is insensitive.
-
-
-# setup the routing for Babel.
-router babel                #activate the Babel routing                 babeld.c
-  network eth0              #eth0 is match                           interface.c
-  redistribute kernel       #(kernel|connected|static|ospf6|bgp)   babel_zebra.c
-  no redistribute static    #...
-
-
-# setup each interface, one by one...
-Interface eth0              #Set eth0 options                        interface.c
-! wired                     #with wire                               interface.c
-  wireless                  #without wire (défaut)                   interface.c
-! babel split-horizon       #with Split-horizon                      interface.c
-  no babel split-horizon    #without (defaut)                        interface.c
-  hello interval 4096       #default = 4096 (in miliseconds)         interface.c
-
-
-# setup the log destination.
-# log stdout
-# log stdout debugging
-log file /var/log/quagga/babeld.log
\ No newline at end of file
+router babel
+! network eth0
+! redistribute kernel
+! no redistribute static
+
+!interface eth0
+! wired
+! wireless
+! babel split-horizon
+! no babel split-horizon
+
+! log file /var/log/quagga/babeld.log
+log stdout
\ No newline at end of file