select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT if !CPU_MICROMIPS
- select ARCH_HAVE_CUSTOM_GPIO_H
select HAVE_FUNCTION_TRACER
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
config ALCHEMY_GPIOINT_AU1300
bool
-# select this in your board config if you don't want to use the gpio
-# namespace as documented in the manuals. In this case however you need
-# to create the necessary gpio_* functions in your board code/headers!
-# see arch/mips/include/asm/mach-au1x00/gpio.h for more information.
-config ALCHEMY_GPIO_INDIRECT
- def_bool n
-
choice
prompt "Machine type"
depends on MIPS_ALCHEMY
#include <asm/idle.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <prom.h>
const char *get_system_type(void)
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
#include <prom.h>
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
-obj-y += prom.o time.o clock.o platform.o power.o \
+obj-y += prom.o time.o clock.o platform.o power.o gpiolib.o \
setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o
-
-# optional gpiolib support
-ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- obj-$(CONFIG_GPIOLIB) += gpiolib.o
-endif
#include <linux/spi/spi_gpio.h>
#include <linux/spi/ads7846.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-db1x00/bcsr.h>
#include <linux/wm97xx.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-au1x00/au1200fb.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <linux/spi/flash.h>
#include <asm/bootinfo.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#include <linux/suspend.h>
#include <linux/sysfs.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <asm/mach-db1x00/bcsr.h>
/*
#include <linux/module.h>
#include <linux/gpio.h>
-#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+#define TITAN_GPIO_MAX 51
struct ar7_gpio_chip {
void __iomem *regs;
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
-#include <asm/mach-ar7/gpio.h>
#include <asm/mach-ar7/prom.h>
/*****************************************************************************
#include <asm/reboot.h>
#include <asm/mach-ar7/ar7.h>
#include <asm/mach-ar7/prom.h>
-#include <asm/mach-ar7/gpio.h>
static void ar7_machine_restart(char *command)
{
+++ /dev/null
-#ifndef __ASM_MIPS_GPIO_H
-#define __ASM_MIPS_GPIO_H
-
-#include <gpio.h>
-
-#endif /* __ASM_MIPS_GPIO_H */
int __init ar7_gpio_init(void);
void __init ar7_init_clocks(void);
+/* Board specific GPIO functions */
+int ar7_gpio_enable(unsigned gpio);
+int ar7_gpio_disable(unsigned gpio);
+
#endif /* __AR7_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2007-2009 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __AR7_GPIO_H__
-#define __AR7_GPIO_H__
-
-#include <asm/mach-ar7/ar7.h>
-
-#define AR7_GPIO_MAX 32
-#define TITAN_GPIO_MAX 51
-#define NR_BUILTIN_GPIO TITAN_GPIO_MAX
-
-#define gpio_to_irq(gpio) -1
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-
-/* Board specific GPIO functions */
-int ar7_gpio_enable(unsigned gpio);
-int ar7_gpio_disable(unsigned gpio);
-
-#include <asm-generic/gpio.h>
-
-#endif
+++ /dev/null
-#ifndef __ASM_MACH_ATH25_GPIO_H
-#define __ASM_MACH_ATH25_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
-
-#endif /* __ASM_MACH_ATH25_GPIO_H */
+++ /dev/null
-/*
- * Atheros AR71XX/AR724X/AR913X GPIO API definitions
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_MACH_ATH79_GPIO_H
-#define __ASM_MACH_ATH79_GPIO_H
-
-#define ARCH_NR_GPIOS 64
-#include <asm-generic/gpio.h>
-
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_cansleep __gpio_cansleep
-
-#endif /* __ASM_MACH_ATH79_GPIO_H */
return -ENXIO;
}
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + 0x110); /* the write op is key */
+ wmb();
+}
+
/*
* GPIO2 block macros for common linux GPIO functions. The 'gpio'
* parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
return -ENXIO;
}
-/**********************************************************************/
-
-/* Linux gpio framework integration.
- *
- * 4 use cases of Au1000-Au1200 GPIOS:
- *(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
- * Board must register gpiochips.
- *(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
- * 2 (1 for Au1000) gpio_chips are registered.
- *
- *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
- * the boards' gpio.h must provide the linux gpio wrapper functions,
- *
- *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
- * inlinable gpio functions are provided which enable access to the
- * Au1000 gpios only by using the numbers straight out of the data-
- * sheets.
-
- * Cases 1 and 3 are intended for boards which want to provide their own
- * GPIO namespace and -operations (i.e. for example you have 8 GPIOs
- * which are in part provided by spare Au1000 GPIO pins and in part by
- * an external FPGA but you still want them to be accssible in linux
- * as gpio0-7. The board can of course use the alchemy_gpioX_* functions
- * as required).
- */
-
-#ifndef CONFIG_GPIOLIB
-
-#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
-
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
-
-static inline int gpio_direction_input(int gpio)
-{
- return alchemy_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(int gpio, int v)
-{
- return alchemy_gpio_direction_output(gpio, v);
-}
-
-static inline int gpio_get_value(int gpio)
-{
- return alchemy_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(int gpio, int v)
-{
- alchemy_gpio_set_value(gpio, v);
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
- return gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
- gpio_set_value(gpio, value);
-}
-
-static inline int gpio_is_valid(int gpio)
-{
- return alchemy_gpio_is_valid(gpio);
-}
-
-static inline int gpio_cansleep(int gpio)
-{
- return alchemy_gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(int gpio)
-{
- return alchemy_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(int irq)
-{
- return alchemy_irq_to_gpio(irq);
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline int gpio_request_one(unsigned gpio,
- unsigned long flags, const char *label)
-{
- return 0;
-}
-
-static inline int gpio_request_array(struct gpio *array, size_t num)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-static inline void gpio_free_array(struct gpio *array, size_t num)
-{
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
- return -ENOSYS;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-}
-
-#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-#endif /* CONFIG_ALCHEMY_GPIOINT_AU1000 */
-
-#endif /* !CONFIG_GPIOLIB */
-
#endif /* _ALCHEMY_GPIO_AU1000_H_ */
+++ /dev/null
-/*
- * Alchemy GPIO support.
- *
- * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
- * the same kernel image.
- * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
- * appropriate CPU type (AU1000 currently).
- */
-
-#ifndef _ALCHEMY_GPIO_H_
-#define _ALCHEMY_GPIO_H_
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio-au1000.h>
-#include <asm/mach-au1x00/gpio-au1300.h>
-
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
- __raw_writel(0, base + 0x110); /* the write op is key */
- wmb();
-}
-
-
-/* Linux gpio framework integration.
-*
-* 4 use cases of Alchemy GPIOS:
-*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
-* Board must register gpiochips.
-*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
-* A gpiochip for the 75 GPIOs is registered.
-*
-*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
-* the boards' gpio.h must provide the linux gpio wrapper functions,
-*
-*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
-* inlinable gpio functions are provided which enable access to the
-* Au1300 gpios only by using the numbers straight out of the data-
-* sheets.
-
-* Cases 1 and 3 are intended for boards which want to provide their own
-* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
-* which are in part provided by spare Au1300 GPIO pins and in part by
-* an external FPGA but you still want them to be accssible in linux
-* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
-* as required).
-*/
-
-#ifdef CONFIG_GPIOLIB
-
-/* wraps the cpu-dependent irq_to_gpio functions */
-/* FIXME: gpiolib needs an irq_to_gpio hook */
-static inline int __au_irq_to_gpio(unsigned int irq)
-{
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
- return alchemy_irq_to_gpio(irq);
- case ALCHEMY_CPU_AU1300:
- return au1300_irq_to_gpio(irq);
- }
- return -EINVAL;
-}
-
-
-/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq __gpio_to_irq
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define irq_to_gpio __au_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ALCHEMY_GPIO_H_ */
+++ /dev/null
-#ifndef __ASM_MIPS_MACH_BCM47XX_GPIO_H
-#define __ASM_MIPS_MACH_BCM47XX_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -EINVAL;
-}
-
-#endif
+++ /dev/null
-#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H
-#define __ASM_MIPS_MACH_BCM63XX_GPIO_H
-
-#include <bcm63xx_gpio.h>
-
-#define gpio_to_irq(gpio) -1
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */
+++ /dev/null
-#ifndef __ASM_MACH_CAVIUM_OCTEON_GPIO_H
-#define __ASM_MACH_CAVIUM_OCTEON_GPIO_H
-
-#ifdef CONFIG_GPIOLIB
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#else
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-#endif
-
-#include <asm-generic/gpio.h>
-
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_MACH_GENERIC_GPIO_H */
+++ /dev/null
-#ifndef __ASM_MACH_GENERIC_GPIO_H
-#define __ASM_MACH_GENERIC_GPIO_H
-
-#ifdef CONFIG_GPIOLIB
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#else
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-#endif
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#endif /* __ASM_MACH_GENERIC_GPIO_H */
void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask);
uint32_t jz_gpio_port_get_value(int port, uint32_t mask);
-#include <asm/mach-generic/gpio.h>
-
#define JZ_GPIO_PORTA(x) ((x) + 32 * 0)
#define JZ_GPIO_PORTB(x) ((x) + 32 * 1)
#define JZ_GPIO_PORTC(x) ((x) + 32 * 2)
+++ /dev/null
-#ifndef __ASM_MIPS_MACH_LANTIQ_GPIO_H
-#define __ASM_MIPS_MACH_LANTIQ_GPIO_H
-
-#define gpio_to_irq __gpio_to_irq
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-
-#include <asm-generic/gpio.h>
-
-#endif
+++ /dev/null
-/*
- * Loongson GPIO Support
- *
- * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
- * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
- * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LOONGSON_GPIO_H
-#define __LOONGSON_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/* The chip can do interrupt
- * but it has not been tested and doc not clear
- */
-static inline int gpio_to_irq(int gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
- return -EINVAL;
-}
-
-#endif /* __LOONGSON_GPIO_H */
+++ /dev/null
-/*
- * Pistachio IRQ setup
- *
- * Copyright (C) 2014 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_PISTACHIO_GPIO_H
-#define __ASM_MACH_PISTACHIO_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_MACH_PISTACHIO_GPIO_H */
#ifndef _RC32434_GPIO_H_
#define _RC32434_GPIO_H_
-#include <linux/types.h>
-#include <asm-generic/gpio.h>
-
-#define NR_BUILTIN_GPIO 32
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio)
-#define irq_to_gpio(irq) (irq - (8 + 4 * 32))
-
struct rb532_gpio_reg {
u32 gpiofunc; /* GPIO Function Register
* gpiofunc[x]==0 bit = gpio
return 0;
}
+static int jz_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct jz_gpio_chip *jz_gpio = gpio_chip_to_jz_gpio_chip(chip);
+
+ return jz_gpio->irq_base + gpio;
+}
+
int jz_gpio_port_direction_input(int port, uint32_t mask)
{
writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR));
}
EXPORT_SYMBOL(jz_gpio_port_get_value);
-int gpio_to_irq(unsigned gpio)
-{
- return JZ4740_IRQ_GPIO(0) + gpio;
-}
-EXPORT_SYMBOL_GPL(gpio_to_irq);
-
-int irq_to_gpio(unsigned irq)
-{
- return irq - JZ4740_IRQ_GPIO(0);
-}
-EXPORT_SYMBOL_GPL(irq_to_gpio);
-
#define IRQ_TO_BIT(irq) BIT(irq_to_gpio(irq) & 0x1f)
static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
.get = jz_gpio_get_value, \
.direction_output = jz_gpio_direction_output, \
.direction_input = jz_gpio_direction_input, \
+ .to_irq = jz_gpio_to_irq, \
.base = JZ4740_GPIO_BASE_ ## _bank, \
.ngpio = JZ4740_GPIO_NUM_ ## _bank, \
}, \
#include <linux/of_irq.h>
#include <linux/of_pci.h>
-#include <asm/gpio.h>
#include <asm/addrspace.h>
#include <lantiq_soc.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/serial_8250.h>
return 0;
}
+static int rb532_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ return 8 + 4 * 32 + gpio;
+}
+
static struct rb532_gpio_chip rb532_gpio_chip[] = {
[0] = {
.chip = {
.direction_output = rb532_gpio_direction_output,
.get = rb532_gpio_get,
.set = rb532_gpio_set,
+ .to_irq = rb532_gpio_to_irq,
.base = 0,
.ngpio = 32,
},
}
EXPORT_SYMBOL(clk_put);
-/* GPIO support */
-
-#ifdef CONFIG_GPIOLIB
-int gpio_to_irq(unsigned gpio)
-{
- return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-#endif
-
#define BOARD_VEC(board) extern struct txx9_board_vec board;
#include <asm/txx9/boards.h>
#undef BOARD_VEC
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <linux/libata.h>
#include <scsi/scsi_host.h>
-#include <asm/gpio.h>
-
#define DRV_NAME "pata-rb532-cf"
#define DRV_VERSION "0.1.0"
#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
};
module_platform_driver(ath79_gpio_driver);
-
-int gpio_get_value(unsigned gpio)
-{
- if (gpio < ath79_gpio_count)
- return __ath79_gpio_get_value(gpio);
-
- return __gpio_get_value(gpio);
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int value)
-{
- if (gpio < ath79_gpio_count)
- __ath79_gpio_set_value(gpio, value);
- else
- __gpio_set_value(gpio, value);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-int gpio_to_irq(unsigned gpio)
-{
- /* FIXME */
- return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int irq_to_gpio(unsigned irq)
-{
- /* FIXME */
- return -EINVAL;
-}
-EXPORT_SYMBOL(irq_to_gpio);
#include <linux/input-polldev.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <asm/mach-rc32434/gpio.h>
#include <asm/mach-rc32434/rb.h>
#include <linux/gpio.h>
#include <linux/atomic.h>
+#include <asm/mach-ar7/ar7.h>
+
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
MODULE_LICENSE("GPL");
projects / mirror_ubuntu-kernels.git / commitdiff