spi: rspi: Move RSPI-specific setup out of DMA routines

Refactor RSPI (on SH) DMA handling to make it reusable for other RSPI
implementations:
  - Call the DMA routines after configuring the TX Mode bit and after
    calling rspi_receive_init(), so these RSPI-specific operations can be
    removed from the DMA routines,
  - Absorb rspi_transfer_out_in() into rspi_transfer_one().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 753ac7bdfd559fc6c3e5aaac7a515eef7f80f7a2..3dea8adfdcf3ab9d3fb3674b26d3896e5814bbe5 100644 (file)
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -480,7 +480,6 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
         */
        disable_irq(rspi->tx_irq);
 
-       rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR);
        rspi_enable_irq(rspi, SPCR_SPTIE);
        rspi->dma_callbacked = 0;
 
@@ -550,8 +549,6 @@ static int rspi_send_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
        if (!desc_rx)
                return -EIO;
 
-       rspi_receive_init(rspi);
-
        /*
         * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be
         * called. So, this driver disables the IRQ while DMA transfer.
@@ -560,7 +557,6 @@ static int rspi_send_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
        if (rspi->rx_irq != rspi->tx_irq)
                disable_irq(rspi->rx_irq);
 
-       rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR);
        rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
        rspi->dma_callbacked = 0;
 
@@ -602,9 +598,10 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
        return __rspi_can_dma(rspi, xfer);
 }
 
-static int rspi_transfer_out_in(struct rspi_data *rspi,
-                               struct spi_transfer *xfer)
+static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
+                            struct spi_transfer *xfer)
 {
+       struct rspi_data *rspi = spi_master_get_devdata(master);
        u8 spcr;
        int ret;
 
@@ -617,6 +614,13 @@ static int rspi_transfer_out_in(struct rspi_data *rspi,
        }
        rspi_write8(rspi, spcr, RSPI_SPCR);
 
+       if (master->can_dma && __rspi_can_dma(rspi, xfer)) {
+               if (xfer->rx_buf)
+                       return rspi_send_receive_dma(rspi, xfer);
+               else
+                       return rspi_send_dma(rspi, xfer);
+       }
+
        ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
        if (ret < 0)
                return ret;
@@ -627,20 +631,6 @@ static int rspi_transfer_out_in(struct rspi_data *rspi,
        return 0;
 }
 
-static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
-                            struct spi_transfer *xfer)
-{
-       struct rspi_data *rspi = spi_master_get_devdata(master);
-
-       if (!master->can_dma || !__rspi_can_dma(rspi, xfer))
-               return rspi_transfer_out_in(rspi, xfer);
-
-       if (xfer->rx_buf)
-               return rspi_send_receive_dma(rspi, xfer);
-       else
-               return rspi_send_dma(rspi, xfer);
-}
-
 static int rspi_rz_transfer_out_in(struct rspi_data *rspi,
                                   struct spi_transfer *xfer)
 {