em28xx-y += em28xx-video.o em28xx-i2c.o em28xx-cards.o
-em28xx-y += em28xx-core.o em28xx-vbi.o
+em28xx-y += em28xx-core.o em28xx-vbi.o em28xx-camera.o
em28xx-alsa-objs := em28xx-audio.o
em28xx-rc-objs := em28xx-input.o
--- /dev/null
+/*
+ em28xx-camera.c - driver for Empia EM25xx/27xx/28xx USB video capture devices
+
+ Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@infradead.org>
+ Copyright (C) 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/i2c.h>
+#include <media/mt9v011.h>
+#include <media/v4l2-common.h>
+
+#include "em28xx.h"
+
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus],
+ ®s[i][0], 3);
+
+ return 0;
+}
+
+
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, },
+ { 0x0d, 0x00, 0x00, },
+ { 0x04, 0x05, 0x00, }, /* hres = 1280 */
+ { 0x03, 0x04, 0x00, }, /* vres = 1024 */
+ { 0x20, 0x11, 0x00, },
+ { 0x06, 0x00, 0x10, },
+ { 0x2b, 0x00, 0x24, },
+ { 0x2e, 0x00, 0x24, },
+ { 0x35, 0x00, 0x24, },
+ { 0x2d, 0x00, 0x20, },
+ { 0x2c, 0x00, 0x20, },
+ { 0x09, 0x0a, 0xd4, },
+ { 0x35, 0x00, 0x57, },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus],
+ ®s[i][0], 3);
+
+ return 0;
+}
+
+
+/*
+ * This method works for webcams with Micron sensors
+ */
+int em28xx_detect_sensor(struct em28xx *dev)
+{
+ int ret;
+ char *name;
+ u8 reg;
+ __be16 id_be;
+ u16 id;
+
+ /* Micron sensor detection */
+ dev->i2c_client[dev->def_i2c_bus].addr = 0xba >> 1;
+ reg = 0;
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], ®, 1);
+ ret = i2c_master_recv(&dev->i2c_client[dev->def_i2c_bus],
+ (char *)&id_be, 2);
+ if (ret != 2)
+ return -EINVAL;
+
+ id = be16_to_cpu(id_be);
+ switch (id) {
+ case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
+ name = "mt9v011";
+ dev->em28xx_sensor = EM28XX_MT9V011;
+ break;
+ case 0x143a: /* MT9M111 as found in the ECS G200 */
+ name = "mt9m111";
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ break;
+ case 0x8431:
+ name = "mt9m001";
+ dev->em28xx_sensor = EM28XX_MT9M001;
+ break;
+ default:
+ em28xx_info("unknown Micron sensor detected: 0x%04x\n", id);
+ return -EINVAL;
+ }
+
+ em28xx_info("sensor %s detected\n", name);
+
+ return 0;
+}
+
+int em28xx_init_camera(struct em28xx *dev)
+{
+ switch (dev->em28xx_sensor) {
+ case EM28XX_MT9V011:
+ {
+ struct mt9v011_platform_data pdata;
+ struct i2c_board_info mt9v011_info = {
+ .type = "mt9v011",
+ .addr = dev->i2c_client[dev->def_i2c_bus].addr,
+ .platform_data = &pdata,
+ };
+
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 480;
+
+ /*
+ * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+ * the Silvercrest cam I have here for testing - for higher
+ * resolutions, a high clock cause horizontal artifacts, so we
+ * need to use a lower xclk frequency.
+ * Yet, it would be possible to adjust xclk depending on the
+ * desired resolution, since this affects directly the
+ * frame rate.
+ */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
+ dev->sensor_xtal = 4300000;
+ pdata.xtal = dev->sensor_xtal;
+ if (NULL ==
+ v4l2_i2c_new_subdev_board(&dev->v4l2_dev,
+ &dev->i2c_adap[dev->def_i2c_bus],
+ &mt9v011_info, NULL))
+ return -ENODEV;
+ /* probably means GRGB 16 bit bayer */
+ dev->vinmode = 0x0d;
+ dev->vinctl = 0x00;
+
+ break;
+ }
+ case EM28XX_MT9M001:
+ dev->sensor_xres = 1280;
+ dev->sensor_yres = 1024;
+
+ em28xx_initialize_mt9m001(dev);
+
+ /* probably means BGGR 16 bit bayer */
+ dev->vinmode = 0x0c;
+ dev->vinctl = 0x00;
+
+ break;
+ case EM28XX_MT9M111:
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
+
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
+ em28xx_initialize_mt9m111(dev);
+
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
+
+ break;
+ case EM28XX_NOSENSOR:
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
#include <media/saa7115.h>
#include <media/tvp5150.h>
#include <media/tvaudio.h>
-#include <media/mt9v011.h>
#include <media/i2c-addr.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
dev->def_i2c_bus = dev->board.def_i2c_bus;
}
-
-/* FIXME: Should be replaced by a proper mt9m111 driver */
-static int em28xx_initialize_mt9m111(struct em28xx *dev)
-{
- int i;
- unsigned char regs[][3] = {
- { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
- { 0x0d, 0x00, 0x00, },
- { 0x0a, 0x00, 0x21, },
- { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
- };
-
- for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], ®s[i][0], 3);
-
- return 0;
-}
-
-
-/* FIXME: Should be replaced by a proper mt9m001 driver */
-static int em28xx_initialize_mt9m001(struct em28xx *dev)
-{
- int i;
- unsigned char regs[][3] = {
- { 0x0d, 0x00, 0x01, },
- { 0x0d, 0x00, 0x00, },
- { 0x04, 0x05, 0x00, }, /* hres = 1280 */
- { 0x03, 0x04, 0x00, }, /* vres = 1024 */
- { 0x20, 0x11, 0x00, },
- { 0x06, 0x00, 0x10, },
- { 0x2b, 0x00, 0x24, },
- { 0x2e, 0x00, 0x24, },
- { 0x35, 0x00, 0x24, },
- { 0x2d, 0x00, 0x20, },
- { 0x2c, 0x00, 0x20, },
- { 0x09, 0x0a, 0xd4, },
- { 0x35, 0x00, 0x57, },
- };
-
- for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], ®s[i][0], 3);
-
- return 0;
-}
-
-/*
- * This method works for webcams with Micron sensors
- */
-static int em28xx_detect_sensor(struct em28xx *dev)
-{
- int rc;
- char *sensor_name;
- unsigned char cmd;
- __be16 version_be;
- u16 version;
-
- /* Micron sensor detection */
- dev->i2c_client[dev->def_i2c_bus].addr = 0xba >> 1;
- cmd = 0;
- i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], &cmd, 1);
- rc = i2c_master_recv(&dev->i2c_client[dev->def_i2c_bus], (char *)&version_be, 2);
- if (rc != 2)
- return -EINVAL;
-
- version = be16_to_cpu(version_be);
- switch (version) {
- case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
- case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
- sensor_name = "mt9v011";
- dev->em28xx_sensor = EM28XX_MT9V011;
- break;
- case 0x143a: /* MT9M111 as found in the ECS G200 */
- sensor_name = "mt9m111";
- dev->em28xx_sensor = EM28XX_MT9M111;
- break;
- case 0x8431:
- sensor_name = "mt9m001";
- dev->em28xx_sensor = EM28XX_MT9M001;
- break;
- default:
- printk("Unknown Micron Sensor 0x%04x\n", version);
- return -EINVAL;
- }
-
- em28xx_info("sensor %s detected\n", sensor_name);
-
- return 0;
-}
-
/* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
}
-static int em28xx_init_camera(struct em28xx *dev)
-{
- switch (dev->em28xx_sensor) {
- case EM28XX_MT9V011:
- {
- struct mt9v011_platform_data pdata;
- struct i2c_board_info mt9v011_info = {
- .type = "mt9v011",
- .addr = dev->i2c_client[dev->def_i2c_bus].addr,
- .platform_data = &pdata,
- };
-
- dev->sensor_xres = 640;
- dev->sensor_yres = 480;
-
- /*
- * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
- * the Silvercrest cam I have here for testing - for higher
- * resolutions, a high clock cause horizontal artifacts, so we
- * need to use a lower xclk frequency.
- * Yet, it would be possible to adjust xclk depending on the
- * desired resolution, since this affects directly the
- * frame rate.
- */
- dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
- em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
- dev->sensor_xtal = 4300000;
- pdata.xtal = dev->sensor_xtal;
- if (NULL ==
- v4l2_i2c_new_subdev_board(&dev->v4l2_dev,
- &dev->i2c_adap[dev->def_i2c_bus],
- &mt9v011_info, NULL))
- return -ENODEV;
- /* probably means GRGB 16 bit bayer */
- dev->vinmode = 0x0d;
- dev->vinctl = 0x00;
-
- break;
- }
- case EM28XX_MT9M001:
- dev->sensor_xres = 1280;
- dev->sensor_yres = 1024;
-
- em28xx_initialize_mt9m001(dev);
-
- /* probably means BGGR 16 bit bayer */
- dev->vinmode = 0x0c;
- dev->vinctl = 0x00;
-
- break;
- case EM28XX_MT9M111:
- dev->sensor_xres = 640;
- dev->sensor_yres = 512;
-
- dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
- em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
- em28xx_initialize_mt9m111(dev);
-
- dev->vinmode = 0x0a;
- dev->vinctl = 0x00;
-
- break;
- case EM28XX_NOSENSOR:
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
static int em28xx_hint_board(struct em28xx *dev)
{
int i;
/* Provided by em28xx-vbi.c */
extern struct vb2_ops em28xx_vbi_qops;
+/* Provided by em28xx-camera.c */
+int em28xx_detect_sensor(struct em28xx *dev);
+int em28xx_init_camera(struct em28xx *dev);
+
/* printk macros */
#define em28xx_err(fmt, arg...) do {\
projects / mirror_ubuntu-disco-kernel.git / commitdiff