* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
* containing info as possible, see &enum nl80211_sta_info_txrate.
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
NL80211_STA_INFO_PLID,
NL80211_STA_INFO_PLINK_STATE,
NL80211_STA_INFO_SIGNAL,
+ NL80211_STA_INFO_SIGNAL_AVG,
NL80211_STA_INFO_TX_BITRATE,
NL80211_STA_INFO_RX_PACKETS,
NL80211_STA_INFO_TX_PACKETS,
* @STATION_INFO_TX_RETRIES: @tx_retries filled
* @STATION_INFO_TX_FAILED: @tx_failed filled
* @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
+ * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
STATION_INFO_TX_RETRIES = 1<<10,
STATION_INFO_TX_FAILED = 1<<11,
STATION_INFO_RX_DROP_MISC = 1<<12,
+ STATION_INFO_SIGNAL_AVG = 1<<13,
};
/**
* @plid: mesh peer link id
* @plink_state: mesh peer link state
* @signal: signal strength of last received packet in dBm
+ * @signal_avg: signal strength average in dBm
* @txrate: current unicast bitrate to this station
* @rx_packets: packets received from this station
* @tx_packets: packets transmitted to this station
u16 plid;
u8 plink_state;
s8 signal;
+ s8 signal_avg;
struct rate_info txrate;
u32 rx_packets;
u32 tx_packets;
select CRYPTO_ARC4
select CRYPTO_AES
select CRC32
+ select AVERAGE
---help---
This option enables the hardware independent IEEE 802.11
networking stack.
if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) ||
(sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) {
- sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
sinfo->signal = (s8)sta->last_signal;
+ sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal);
}
sinfo->txrate.flags = 0;
sta->rx_fragments++;
sta->rx_bytes += rx->skb->len;
sta->last_signal = status->signal;
+ ewma_add(&sta->avg_signal, -status->signal);
/*
* Change STA power saving mode only at the end of a frame
sta->local = local;
sta->sdata = sdata;
+ ewma_init(&sta->avg_signal, 1000, 8);
+
if (sta_prepare_rate_control(local, sta, gfp)) {
kfree(sta);
return NULL;
#include <linux/types.h>
#include <linux/if_ether.h>
#include <linux/workqueue.h>
+#include <linux/average.h>
#include "key.h"
/**
* @rx_fragments: number of received MPDUs
* @rx_dropped: number of dropped MPDUs from this STA
* @last_signal: signal of last received frame from this STA
+ * @avg_signal: moving average of signal of received frames from this STA
* @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
* @tx_filtered_count: number of frames the hardware filtered for this STA
* @tx_retry_failed: number of frames that failed retry
unsigned long rx_fragments;
unsigned long rx_dropped;
int last_signal;
+ struct ewma avg_signal;
__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
/* Updated from TX status path only, no locking requirements */
if (sinfo->filled & STATION_INFO_SIGNAL)
NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL,
sinfo->signal);
+ if (sinfo->filled & STATION_INFO_SIGNAL_AVG)
+ NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL_AVG,
+ sinfo->signal_avg);
if (sinfo->filled & STATION_INFO_TX_BITRATE) {
txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE);
if (!txrate)