Start cleaning 32-bit vs. 64-bit configuration.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
-config MIPS64
- bool "64-bit kernel"
+mainmenu "Linux/MIPS Kernel Configuration"
+
+source "init/Kconfig"
+
+menu "Kernel type"
+
+choice
+
+ prompt "Kernel code model"
help
- Select this option if you want to build a 64-bit kernel. You should
- only select this option if you have hardware that actually has a
- 64-bit processor and if your application will actually benefit from
- 64-bit processing, otherwise say N. You must say Y for kernels for
- SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N.
+ You should only select this option if you have a workload that
+ actually benefits from 64-bit processing or if your machine has
+ large memory. You will only be presented a single option in this
+ menu if your system does not support both 32-bit and 64-bit kernels.
-config 64BIT
- def_bool MIPS64
+config 32BIT
+ bool "32-bit kernel"
+ depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
+ select TRAD_SIGNALS
+ help
+ Select this option if you want to build a 32-bit kernel.
-config MIPS32
- bool
- depends on MIPS64 = 'n'
- default y
+config 64BIT
+ bool "64-bit kernel"
+ depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+ help
+ Select this option if you want to build a 64-bit kernel.
-mainmenu "Linux/MIPS Kernel Configuration"
+endchoice
-source "init/Kconfig"
+endmenu
menu "Machine selection"
config TOSHIBA_JMR3927
bool "Support for Toshiba JMR-TX3927 board"
- depends on MIPS32
+ depends on 32BIT
select DMA_NONCOHERENT
select HW_HAS_PCI
select SWAP_IO_SPACE
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
- depends on MIPS32 || EXPERIMENTAL
+ depends on 32BIT || EXPERIMENTAL
---help---
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
config SGI_IP27
bool "Support for SGI IP27 (Origin200/2000)"
- depends on MIPS64
+ depends on 64BIT
select ARC
select ARC64
select DMA_IP27
config SGI_IP32
bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
- depends on MIPS64 && EXPERIMENTAL
+ depends on 64BIT && EXPERIMENTAL
select ARC
select ARC32
select BOOT_ELF32
If you want this kernel to run on SGI O2 workstation, say Y here.
config SOC_AU1X00
- depends on MIPS32
+ depends on 32BIT
bool "Support for AMD/Alchemy Au1X00 SOCs"
choice
config TOSHIBA_RBTX4927
bool "Support for Toshiba TBTX49[23]7 board"
- depends on MIPS32
+ depends on 32BIT
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config CPU_TX39XX
bool "R39XX"
- depends on MIPS32
+ depends on 32BIT
config CPU_VR41XX
bool "R41xx"
config CPU_R6000
bool "R6000"
- depends on MIPS32 && EXPERIMENTAL
+ depends on 32BIT && EXPERIMENTAL
help
MIPS Technologies R6000 and R6000A series processors. Note these
processors are extremly rare and the support for them is incomplete.
config CPU_R8000
bool "R8000"
- depends on MIPS64 && EXPERIMENTAL
+ depends on 64BIT && EXPERIMENTAL
help
MIPS Technologies R8000 processors. Note these processors are
uncommon and the support for them is incomplete.
config 64BIT_PHYS_ADDR
bool "Support for 64-bit physical address space"
- depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
config CPU_ADVANCED
bool "Override CPU Options"
- depends on MIPS32
+ depends on 32BIT
help
Saying yes here allows you to select support for various features
your CPU may or may not have. Most people should say N here.
#
config HIGHMEM
bool "High Memory Support"
- depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
+ depends on 32BIT && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
config ARCH_FLATMEM_ENABLE
def_bool y
config MIPS_INSANE_LARGE
bool "Support for large 64-bit configurations"
- depends on CPU_R10000 && MIPS64
+ depends on CPU_R10000 && 64BIT
help
MIPS R10000 does support a 44 bit / 16TB address space as opposed to
previous 64-bit processors which only supported 40 bit / 1TB. If you
config TRAD_SIGNALS
bool
- default y if MIPS32
+ default y if 32BIT
config BUILD_ELF64
bool "Use 64-bit ELF format for building"
- depends on MIPS64
+ depends on 64BIT
help
A 64-bit kernel is usually built using the 64-bit ELF binary object
format as it's one that allows arbitrary 64-bit constructs. For
config BINFMT_IRIX
bool "Include IRIX binary compatibility"
- depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
+ depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN
config MIPS32_COMPAT
bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
- depends on MIPS64
+ depends on 64BIT
help
Select this option if you want Linux/MIPS 32-bit binary
compatibility. Since all software available for Linux/MIPS is
64bit-emul = elf64btsmip
endif
-ifdef CONFIG_MIPS32
+ifdef CONFIG_32BIT
gcc-abi = 32
tool-prefix = $(32bit-tool-prefix)
UTS_MACHINE := mips
endif
-ifdef CONFIG_MIPS64
+ifdef CONFIG_64BIT
gcc-abi = 64
tool-prefix = $(64bit-tool-prefix)
UTS_MACHINE := mips64
vmlinux-32 = vmlinux
vmlinux-64 = vmlinux.64
-cflags-$(CONFIG_MIPS64) += $(call cc-option,-mno-explicit-relocs)
+cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs)
endif
#
#
core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/
cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22
-ifdef CONFIG_MIPS32
+ifdef CONFIG_32BIT
load-$(CONFIG_SGI_IP22) += 0xffffffff88002000
endif
-ifdef CONFIG_MIPS64
+ifdef CONFIG_64BIT
load-$(CONFIG_SGI_IP22) += 0xffffffff88004000
endif
cflags-y += -Iinclude/asm-mips/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
-ifdef CONFIG_MIPS32
+ifdef CONFIG_32BIT
ifdef CONFIG_CPU_LITTLE_ENDIAN
JIFFIES = jiffies_64
else
head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
libs-y += arch/mips/lib/
-libs-$(CONFIG_MIPS32) += arch/mips/lib-32/
-libs-$(CONFIG_MIPS64) += arch/mips/lib-64/
+libs-$(CONFIG_32BIT) += arch/mips/lib-32/
+libs-$(CONFIG_64BIT) += arch/mips/lib-64/
core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
# Wed Jan 26 02:49:00 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:00 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:00 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:01 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:01 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:01 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:02 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:02 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:02 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:03 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:03 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:03 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:03 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:04 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:04 2005
#
CONFIG_MIPS=y
-CONFIG_MIPS64=y
+CONFIG_64BIT=y
CONFIG_64BIT=y
#
# Wed Jan 26 02:49:04 2005
#
CONFIG_MIPS=y
-CONFIG_MIPS64=y
+CONFIG_64BIT=y
CONFIG_64BIT=y
#
# Wed Jan 26 02:49:05 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:05 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:05 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:06 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:06 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:53:14 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:07 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:07 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:07 2005
#
CONFIG_MIPS=y
-CONFIG_MIPS64=y
+CONFIG_64BIT=y
CONFIG_64BIT=y
#
# Wed Jan 26 02:49:08 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:08 2005
#
CONFIG_MIPS=y
-CONFIG_MIPS64=y
+CONFIG_64BIT=y
CONFIG_64BIT=y
#
# Wed Jan 26 02:49:08 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:09 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:09 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:09 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:10 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:10 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:12 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:12 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:12 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
# Wed Jan 26 02:49:13 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
*/
mfc0 t0,CP0_CAUSE # get pending interrupts
mfc0 t1,CP0_STATUS
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
lw t2,cpu_fpu_mask
#endif
andi t0,ST0_IM # CAUSE.CE may be non-zero!
beqz t0,spurious
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
and t2,t0
bnez t2,fpu # handle FPU immediately
#endif
j ret_from_irq
nop
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
fpu:
j handle_fpe_int
nop
lib-y += init.o memory.o cmdline.o identify.o console.o
-lib-$(CONFIG_MIPS32) += locore.o
-lib-$(CONFIG_MIPS64) += call_o32.o
+lib-$(CONFIG_32BIT) += locore.o
+lib-$(CONFIG_64BIT) += call_o32.o
EXTRA_AFLAGS := $(CFLAGS)
# Wed Jan 26 02:48:59 2005
#
CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
#
# Code maturity level options
ifdef CONFIG_MODULES
obj-y += mips_ksyms.o module.o
-obj-$(CONFIG_MIPS32) += module-elf32.o
-obj-$(CONFIG_MIPS64) += module-elf64.o
+obj-$(CONFIG_32BIT) += module-elf32.o
+obj-$(CONFIG_64BIT) += module-elf64.o
endif
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o
obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o
-obj-$(CONFIG_MIPS32) += scall32-o32.o
-obj-$(CONFIG_MIPS64) += scall64-64.o
+obj-$(CONFIG_32BIT) += scall32-o32.o
+obj-$(CONFIG_64BIT) += scall64-64.o
obj-$(CONFIG_BINFMT_IRIX) += binfmt_irix.o
obj-$(CONFIG_MIPS32_COMPAT) += ioctl32.o linux32.o signal32.o
obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o
obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o
obj-$(CONFIG_PROC_FS) += proc.o
-obj-$(CONFIG_MIPS64) += cpu-bugs64.o
+obj-$(CONFIG_64BIT) += cpu-bugs64.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
#include <asm/stackframe.h>
#include <asm/gdb-stub.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define DMFC0 mfc0
#define DMTC0 mtc0
#define LDC1 lwc1
#define SDC1 lwc1
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define DMFC0 dmfc0
#define DMTC0 dmtc0
#define LDC1 ldc1
#endif
mfc0 k1, CP0_CAUSE
andi k1, k1, 0x7c
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
dsll k1, k1, 1
#endif
PTR_L k0, exception_handlers(k1)
beq k1, k0, handle_vced
li k0, 14<<2
beq k1, k0, handle_vcei
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
dsll k1, k1, 1
#endif
.set pop
start with an n and gas will believe \n is ok ... */
.macro __BUILD_verbose nexception
LONG_L a1, PT_EPC(sp)
-#if CONFIG_MIPS32
+#if CONFIG_32BIT
PRINT("Got \nexception at %08lx\012")
#endif
-#if CONFIG_MIPS64
+#if CONFIG_64BIT
PRINT("Got \nexception at %016lx\012")
#endif
.endm
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
BUILD_HANDLER reserved reserved sti verbose /* others */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/* A temporary overflow handler used by check_daddi(). */
__INIT
.endm
.macro setup_c0_status_pri
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
setup_c0_status ST0_KX 0
#else
setup_c0_status 0 0
.endm
.macro setup_c0_status_sec
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
setup_c0_status ST0_KX ST0_BEV
#else
setup_c0_status 0 ST0_BEV
* slightly different layout ...
*/
page swapper_pg_dir, _PGD_ORDER
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
page invalid_pmd_table, _PMD_ORDER
#endif
page invalid_pte_table, _PTE_ORDER
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strchr);
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
EXPORT_SYMBOL(strncmp);
#endif
EXPORT_SYMBOL(strlen);
/* New thread loses kernel privileges. */
status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|KU_MASK);
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
status &= ~ST0_FR;
status |= (current->thread.mflags & MF_32BIT_REGS) ? 0 : ST0_FR;
#endif
break;
if (
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
ip->i_format.opcode == sw_op &&
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
ip->i_format.opcode == sd_op &&
#endif
ip->i_format.rs == 29)
out:
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps */
pc &= 0xffffffffUL;
#endif
if (tsk_used_math(child)) {
fpureg_t *fregs = get_fpu_regs(child);
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
/*
* The odd registers are actually the high
* order bits of the values stored in the even
else
tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff);
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
tmp = fregs[addr - FPR_BASE];
#endif
} else {
sizeof(child->thread.fpu.hard));
child->thread.fpu.hard.fcr31 = 0;
}
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
/*
* The odd registers are actually the high order bits
* of the values stored in the even registers - unless
fregs[addr - FPR_BASE] |= data;
}
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
fregs[addr - FPR_BASE] = data;
#endif
break;
static inline int audit_arch(void)
{
#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
if (!(current->thread.mflags & MF_32BIT_REGS))
return AUDIT_ARCH_MIPSEL64;
#endif /* MIPS64 */
return AUDIT_ARCH_MIPSEL;
#else /* big endian... */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
if (!(current->thread.mflags & MF_32BIT_REGS))
return AUDIT_ARCH_MIPS64;
#endif /* MIPS64 */
LEAF(_save_fp_context)
cfc1 t1, fcr31
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/* Store the 16 odd double precision registers */
EX sdc1 $f1, SC_FPREGS+8(a0)
EX sdc1 $f3, SC_FPREGS+24(a0)
*/
LEAF(_restore_fp_context)
EX lw t0, SC_FPC_CSR(a0)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
EX ldc1 $f1, SC_FPREGS+8(a0)
EX ldc1 $f3, SC_FPREGS+24(a0)
EX ldc1 $f5, SC_FPREGS+40(a0)
* Save a thread's fp context.
*/
LEAF(_save_fp)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
mfc0 t1, CP0_STATUS
#endif
fpu_save_double a0 t1 t0 t2 # clobbers t1
li t1, -1 # SNaN
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
sll t0, t0, 5
bgez t0, 1f # 16 / 32 register mode?
if (*tmp)
strcat(command_line, tmp);
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/* HACK: Guess if the sign extension was forgotten */
if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
start |= 0xffffffff00000000;
{
int i;
-#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
/*
* The 64bit code in 32bit object format trick can't represent
* 64bit wide relocations for linker script symbols.
* flag that some firmware may have left set and the TS bit (for
* IP27). Set XX for ISA IV code to work.
*/
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
break;
case lwu_op:
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
*newvalue = value;
*regptr = ®s->regs[insn.i_format.rt];
break;
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
case ld_op:
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
*newvalue = value;
*regptr = ®s->regs[insn.i_format.rt];
break;
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
break;
case sd_op:
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* A 32-bit kernel might be running on a 64-bit processor. But
* if we're on a 32-bit processor and an i-cache incoherency
if (res)
goto fault;
break;
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/* Cannot handle 64-bit instructions in 32-bit kernel */
goto sigill;
/*
* Only on the 64-bit kernel we can made use of 64-bit registers.
*/
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define USE_DOUBLE
#endif
return err;
}
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* This is the o32 version
*/
obj-y += cache.o extable.o fault.o init.o pgtable.o \
tlbex.o tlbex-fault.o
-obj-$(CONFIG_MIPS32) += ioremap.o pgtable-32.o
-obj-$(CONFIG_MIPS64) += pgtable-64.o
+obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
+obj-$(CONFIG_64BIT) += pgtable-64.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
".set push\n\t"
".set noat\n\t"
".set mips3\n\t"
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
"la $at,1f\n\t"
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
"dla $at,1f\n\t"
#endif
"cache %0,($at)\n\t"
kmap_prot = PAGE_KERNEL;
}
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
static void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
j = 0;
}
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
#endif /* CONFIG_HIGHMEM */
#ifndef CONFIG_NEED_MULTIPLE_NODES
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/* Switch from KSEG0 to XKPHYS addresses */
start = (unsigned long)phys_to_virt(CPHYSADDR(start));
end = (unsigned long)phys_to_virt(CPHYSADDR(end));
addr = (unsigned long) &__init_begin;
while (addr < (unsigned long) &__init_end) {
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
page = PAGE_OFFSET | CPHYSADDR(addr);
#else
page = addr;
" pref " SB1_PREF_STORE_STREAMED_HINT ", -64(%1)\n"
" pref " SB1_PREF_LOAD_STREAMED_HINT ", -32(%0)\n"
"1: pref " SB1_PREF_STORE_STREAMED_HINT ", -32(%1)\n"
-# ifdef CONFIG_MIPS64
+# ifdef CONFIG_64BIT
" ld $8, -128(%0) \n" /* Block copy a cacheline */
" ld $9, -120(%0) \n"
" ld $10, -112(%0) \n"
" daddiu %0, %0, -128 \n"
" daddiu %1, %1, -128 \n"
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
" ld $8, 0(%0) \n" /* Block copy a cacheline */
"1: ld $9, 8(%0) \n"
" ld $10, 16(%0) \n"
" daddiu %0, %0, 32 \n"
" daddiu %1, %1, 32 \n"
" bnel %0, %2, 1b \n"
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
" ld $8, 0(%0) \n"
#else
" lw $2, 0(%0) \n"
" .set pop \n"
: "+r" (src), "+r" (dst)
: "r" (end)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
: "$8","$9","$10","$11","memory");
#else
: "$2","$3","$6","$7","$8","$9","$10","$11","memory");
L_LA(_r3000_write_probe_ok)
/* convenience macros for instructions */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
# define i_LW(buf, rs, rt, off) i_ld(buf, rs, rt, off)
# define i_SW(buf, rs, rt, off) i_sd(buf, rs, rt, off)
# define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh)
#define i_ssnop(buf) i_sll(buf, 0, 0, 1)
#define i_ehb(buf) i_sll(buf, 0, 0, 3)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
static __init int __attribute__((unused)) in_compat_space_p(long addr)
{
/* Is this address in 32bit compat space? */
static __init void i_LA_mostly(u32 **buf, unsigned int rs, long addr)
{
-#if CONFIG_MIPS64
+#if CONFIG_64BIT
if (!in_compat_space_p(addr)) {
i_lui(buf, rs, rel_highest(addr));
if (rel_higher(addr))
#define C0_EPC 14
#define C0_XCONTEXT 20
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
# define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT)
#else
# define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_CONTEXT)
}
}
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* TMP and PTR are scratch.
* TMP will be clobbered, PTR will hold the pmd entry.
}
}
-#else /* !CONFIG_MIPS64 */
+#else /* !CONFIG_64BIT */
/*
* TMP and PTR are scratch.
i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
}
-#endif /* !CONFIG_MIPS64 */
+#endif /* !CONFIG_64BIT */
static __init void build_adjust_context(u32 **p, unsigned int ctx)
{
/* No need for i_nop */
}
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
l_leave(&l, p);
i_eret(&p); /* return from trap */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
#endif
* need three, with the the second nop'ed and the third being
* unused.
*/
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
if ((p - tlb_handler) > 64)
panic("TLB refill handler space exceeded");
#else
/*
* Now fold the handler in the TLB refill handler space.
*/
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
f = final_handler;
/* Simplest case, just copy the handler. */
copy_handler(relocs, labels, tlb_handler, p, f);
final_len = p - tlb_handler;
-#else /* CONFIG_MIPS64 */
+#else /* CONFIG_64BIT */
f = final_handler + 32;
if ((p - tlb_handler) <= 32) {
/* Just copy the handler. */
copy_handler(relocs, labels, split, p, final_handler);
final_len = (f - (final_handler + 32)) + (p - split);
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
resolve_relocs(relocs, labels);
printk("Synthesized TLB refill handler (%u instructions).\n",
struct reloc **r, unsigned int pte,
unsigned int ptr)
{
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
#else
build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
l_leave(l, *p);
i_eret(p); /* return from trap */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
#endif
}
}
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
{
return p;
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/* PMON passes arguments in C main() style */
void __init prom_init(void)
// ja_setup_console(); /* The very first thing. */
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
char *ptr;
printk("Mips64 Jaguar-ATX\n");
}
printk("arcs_cmdline: %s\n", arcs_cmdline);
-#else /* CONFIG_MIPS64 */
+#else /* CONFIG_64BIT */
/* save the PROM vectors for debugging use */
debug_vectors = cv;
}
env++;
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_JAGUAR_ATX;
void momenco_jaguar_restart(char *command)
{
/* base address of timekeeper portion of part */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
void *nvram = (void*) 0xfffffffffc807000;
#else
void *nvram = (void*) 0xfc807000;
static __init void wire_stupidity_into_tlb(void)
{
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
write_c0_wired(0);
local_flush_tlb_all();
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
{
return p;
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
void __init prom_init(void)
{
struct callvectors *cv = (struct callvectors *) fw_arg3;
int i;
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
char *ptr;
printk("prom_init - MIPS64\n");
}
printk("arcs_cmdline: %s\n", arcs_cmdline);
-#else /* CONFIG_MIPS64 */
+#else /* CONFIG_64BIT */
/* save the PROM vectors for debugging use */
debug_vectors = cv;
}
env++;
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_3;
get_mac(prom_mac_addr_base);
#endif
-#ifndef CONFIG_MIPS64
+#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
}
#include <linux/config.h>
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define OCELOT_C_CS0_ADDR (0xfffffffffc000000)
#else
#define OCELOT_C_CS0_ADDR (0xfc000000)
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
{
p = (char *)get_arg(args, arg_index);
return p;
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
void __init prom_init(void)
struct callvectors *cv = (struct callvectors *) fw_arg3;
int i;
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
char *ptr;
printk("prom_init - MIPS64\n");
}
printk("arcs_cmdline: %s\n", arcs_cmdline);
-#else /* CONFIG_MIPS64 */
+#else /* CONFIG_64BIT */
/* save the PROM vectors for debugging use */
debug_vectors = cv;
}
env++;
}
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT_C;
get_mac(prom_mac_addr_base);
#endif
-#ifndef CONFIG_MIPS64
+#ifndef CONFIG_64BIT
debug_vectors->printf("Booting Linux kernel...\n");
#endif
}
{
/* base address of timekeeper portion of part */
void *nvram = (void *)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
0xfffffffffc807000;
#else
0xfc807000;
*/
printk("PMON_v2_setup\n");
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/* marvell and extra space */
add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K);
/* fpga, rtc, and uart */
unsigned long m48t37y_get_time(void)
{
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000;
#else
unsigned char* rtc_base = (unsigned char*)0xfc800000;
int m48t37y_set_time(unsigned long sec)
{
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000;
#else
unsigned char* rtc_base = (unsigned char*)0xfc800000;
early_initcall(momenco_ocelot_c_setup);
-#ifndef CONFIG_MIPS64
+#ifndef CONFIG_64BIT
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
static int io_base_ioremap(void)
extern struct pci_ops mace_pci_ops;
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
static struct resource mace_pci_mem_resource = {
.name = "SGI O2 PCI MEM",
.start = MACEPCI_HI_MEMORY,
#include "cfe_error.h"
/* Max ram addressable in 32-bit segments */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define MAX_RAM_SIZE (~0ULL)
#else
#ifdef CONFIG_HIGHMEM
{
if (!is_fixup && (regs->cp0_cause & 4)) {
/* Data bus error - print PA */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
printk("DBE physical address: %010lx\n",
__read_64bit_c0_register($26, 1));
#else
#for instance.
config LBD
bool "Support for Large Block Devices"
- depends on X86 || MIPS32 || PPC32 || ARCH_S390_31 || SUPERH || UML
+ depends on X86 || (MIPS && 32BIT) || PPC32 || ARCH_S390_31 || SUPERH || UML
help
Say Y here if you want to attach large (bigger than 2TB) discs to
your machine, or if you want to have a raid or loopback device
config SCSI_DECSII
tristate "DEC SII Scsi Driver"
- depends on MACH_DECSTATION && SCSI && MIPS32
+ depends on MACH_DECSTATION && SCSI && 32BIT
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
config SERIAL_DZ
bool "DECstation DZ serial driver"
- depends on MACH_DECSTATION && MIPS32
+ depends on MACH_DECSTATION && 32BIT
select SERIAL_CORE
help
DZ11-family serial controllers for VAXstations, including the
#ifdef __KERNEL__
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define STACK_TOP TASK_SIZE
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define STACK_TOP (current->thread.mflags & MF_32BIT_ADDR ? TASK_SIZE32 : TASK_SIZE)
#endif
#define CPHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
#define XPHYSADDR(a) ((_ACAST64_ (a)) & 0x000000ffffffffff)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* Memory segments (64bit kernel mode addresses)
#include <linux/config.h>
#include <asm/hazards.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#include <asm/asmmacro-32.h>
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#include <asm/asmmacro-64.h>
#endif
*/
#define atomic_add_negative(i,v) (atomic_add_return(i, (v)) < 0)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
typedef struct { volatile __s64 counter; } atomic64_t;
*/
#define atomic64_add_negative(i,v) (atomic64_add_return(i, (v)) < 0)
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/*
* atomic*_return operations are serializing but not the non-*_return
int b = 0, s;
word = ~word;
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
s = 16; if (word << 16 != 0) s = 0; b += s; word >>= s;
s = 8; if (word << 24 != 0) s = 0; b += s; word >>= s;
s = 4; if (word << 28 != 0) s = 0; b += s; word >>= s;
s = 2; if (word << 30 != 0) s = 0; b += s; word >>= s;
s = 1; if (word << 31 != 0) s = 0; b += s;
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
s = 32; if (word << 32 != 0) s = 0; b += s; word >>= s;
s = 16; if (word << 48 != 0) s = 0; b += s; word >>= s;
s = 8; if (word << 56 != 0) s = 0; b += s; word >>= s;
*/
static inline int sched_find_first_bit(const unsigned long *b)
{
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
if (unlikely(b[0]))
return __ffs(b[0]);
if (unlikely(b[1]))
return __ffs(b[3]) + 96;
return __ffs(b[4]) + 128;
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
if (unlikely(b[0]))
return __ffs(b[0]);
if (unlikely(b[1]))
static inline void check_bugs(void)
{
check_bugs32();
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
check_bugs64();
#endif
}
{
__asm__(
".set\tnoat\t\t\t# csum_tcpudp_nofold\n\t"
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
"addu\t%0, %2\n\t"
"sltu\t$1, %0, %2\n\t"
"addu\t%0, $1\n\t"
"sltu\t$1, %0, %4\n\t"
"addu\t%0, $1\n\t"
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
"daddu\t%0, %2\n\t"
"daddu\t%0, %3\n\t"
"daddu\t%0, %4\n\t"
#define PLAT_TRAMPOLINE_STUFF_LINE 0UL
#endif
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
# ifndef cpu_has_nofpuex
# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX)
# endif
# endif
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
# ifndef cpu_has_nofpuex
# define cpu_has_nofpuex 0
# endif
*/
#define REX_PROM_MAGIC 0x30464354
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
-#else /* !CONFIG_MIPS64 */
+#else /* !CONFIG_64BIT */
#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC)
-#endif /* !CONFIG_MIPS64 */
+#endif /* !CONFIG_64BIT */
/*
extern int (*__pmax_close)(int);
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* On MIPS64 we have to call PROM functions via a helper
#define prom_getenv(x) _prom_getenv(__prom_getenv, x)
#define prom_printf(x...) _prom_printf(__prom_printf, x)
-#else /* !CONFIG_MIPS64 */
+#else /* !CONFIG_64BIT */
/*
* On plain MIPS we just call PROM functions directly.
#define pmax_read __pmax_read
#define pmax_close __pmax_close
-#endif /* !CONFIG_MIPS64 */
+#endif /* !CONFIG_64BIT */
extern void prom_meminit(u32);
* The common rates of 1000 and 128 are rounded wrongly by the
* catchall case for 64-bit. Excessive precission? Probably ...
*/
-#if defined(CONFIG_MIPS64) && (HZ == 128)
+#if defined(CONFIG_64BIT) && (HZ == 128)
usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_MIPS64) && (HZ == 1000)
+#elif defined(CONFIG_64BIT) && (HZ == 1000)
usecs *= 0x004189374BC6A7f0UL; /* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_MIPS64)
+#elif defined(CONFIG_64BIT)
usecs *= (0x8000000000000000UL / (500000 / HZ));
#else /* 32-bit junk follows here */
usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
typedef double elf_fpreg_t;
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define ELF_CLASS ELFCLASS32
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
*/
#define ELF_CLASS ELFCLASS64
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/*
* These are used to set parameters in the core dumps.
#ifdef __KERNEL__
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define SET_PERSONALITY(ex, ibcs2) \
do { \
set_personality(PER_LINUX); \
} while (0)
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define SET_PERSONALITY(ex, ibcs2) \
do { current->thread.mflags &= ~MF_ABI_MASK; \
set_personality(PER_LINUX); \
} while (0)
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
#include <linux/percpu.h>
#include <asm/atomic.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
typedef atomic_t local_t;
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
typedef atomic64_t local_t;
#include <linux/config.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define CAC_BASE 0x80000000
#define IO_BASE 0xa0000000
#define HIGHMEM_START 0x20000000UL
#endif
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* This handles the memory map.
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK))
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
#endif /* __ASM_MACH_GENERIC_SPACES_H */
#include <linux/config.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define CAC_BASE 0x80000000
#define IO_BASE 0xa0000000
#define HIGHMEM_START 0x20000000UL
#endif
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define PAGE_OFFSET 0xffffffff80000000UL
#ifndef HIGHMEM_START
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK))
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
#endif /* __ASM_MACH_IP22_SPACES_H */
* so, for 64bit IP32 kernel we just don't use ll/sc.
* This does not affect luserland.
*/
-#if defined(CONFIG_CPU_R5000) && defined(CONFIG_MIPS64)
+#if defined(CONFIG_CPU_R5000) && defined(CONFIG_64BIT)
#define cpu_has_llsc 0
#else
#define cpu_has_llsc 1
#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
pgd_current[smp_processor_id()] = (unsigned long)(pgd)
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) smp_processor_id() << 23); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
-#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) &pgd_current[smp_processor_id()] << 23); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
-#if defined(CONFIG_MIPS64) && defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) smp_processor_id() << 23); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
Elf64_Sxword r_addend; /* Addend. */
} Elf64_Mips_Rela;
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define Elf_Shdr Elf64_Shdr
#define Elf_Sym Elf64_Sym
struct msqid64_ds {
struct ipc64_perm msg_perm;
-#if defined(CONFIG_MIPS32) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
unsigned long __unused1;
#endif
__kernel_time_t msg_stime; /* last msgsnd time */
-#if defined(CONFIG_MIPS32) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
unsigned long __unused1;
#endif
-#if defined(CONFIG_MIPS32) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
unsigned long __unused2;
#endif
__kernel_time_t msg_rtime; /* last msgrcv time */
-#if defined(CONFIG_MIPS32) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
unsigned long __unused2;
#endif
-#if defined(CONFIG_MIPS32) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
unsigned long __unused3;
#endif
__kernel_time_t msg_ctime; /* last change time */
-#if defined(CONFIG_MIPS32) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
unsigned long __unused3;
#endif
unsigned long msg_cbytes; /* current number of bytes on queue */
#include <linux/config.h>
#include <linux/errno.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define __PA_ADDR ".word"
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define __PA_ADDR ".dword"
#endif
#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define pgd_populate(mm, pmd, pte) BUG()
/*
#define __pmd_free_tlb(tlb,x) do { } while (0)
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define pgd_populate(mm, pgd, pmd) set_pgd(pgd, __pgd(pmd))
#include <asm-generic/4level-fixup.h>
#include <linux/config.h>
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#include <asm/pgtable-32.h>
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#include <asm/pgtable-64.h>
#endif
extern unsigned int vced_count, vcei_count;
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
/*
* User space process size: 2GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3))
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
/*
* User space process size: 1TB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing. TASK_SIZE
* system call/exception. As usual the registers k0/k1 aren't being saved.
*/
struct pt_regs {
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
/* Pad bytes for argument save space on the stack. */
unsigned long pad0[6];
#endif
#include <linux/config.h>
-#if defined(CONFIG_MIPS32) || defined(WANT_COMPAT_REG_H)
+#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
#define EF_R0 6
#define EF_R1 7
#endif
-#if CONFIG_MIPS64
+#if CONFIG_64BIT
#define EF_R0 0
#define EF_R1 1
#define EF_SIZE 304 /* size in bytes */
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
#endif /* __ASM_MIPS_REG_H */
* but we keep the old value on MIPS32,
* for compatibility:
*/
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
# define RLIM_INFINITY 0x7fffffffUL
#endif
* Macros for calling a 32-bit ARC implementation from 64-bit code
*/
-#if defined(CONFIG_MIPS64) && defined(CONFIG_ARC32)
+#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32)
#define __arc_clobbers \
"$2","$3" /* ... */, "$8","$9","$10","$11", \
__res; \
})
-#endif /* defined(CONFIG_MIPS64) && defined(CONFIG_ARC32) */
+#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */
-#if (defined(CONFIG_MIPS32) && defined(CONFIG_ARC32)) || \
- (defined(CONFIG_MIPS64) && defined(CONFIG_ARC64))
+#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) || \
+ (defined(CONFIG_64BIT) && defined(CONFIG_ARC64))
#define ARC_CALL0(dest) \
({ long __res; \
/*
* Careful to keep union _sifields from shifting ...
*/
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
#endif
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
#endif
#define __str2(x) #x
#define __str(x) __str2(x)
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define save_static_function(symbol) \
__asm__ ( \
#define nabi_no_regargs
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define save_static_function(symbol) \
__asm__ ( \
unsigned long __dummy6, \
unsigned long __dummy7,
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
#endif /* _ASM_SIM_H */
.macro SAVE_TEMP
mfhi v1
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
LONG_S $8, PT_R8(sp)
LONG_S $9, PT_R9(sp)
#endif
#ifdef CONFIG_SMP
.macro get_saved_sp /* SMP variation */
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
mfc0 k0, CP0_CONTEXT
lui k1, %hi(kernelsp)
srl k0, k0, 23
addu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
-#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
MFC0 k1, CP0_CONTEXT
dsra k1, 23
lui k0, %hi(pgd_current)
daddu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
-#if defined(CONFIG_MIPS64) && defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
MFC0 k1, CP0_CONTEXT
dsrl k1, 23
dsll k1, k1, 3
.endm
.macro set_saved_sp stackp temp temp2
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
mfc0 \temp, CP0_CONTEXT
srl \temp, 23
sll \temp, 2
LONG_S \stackp, kernelsp(\temp)
#endif
-#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
lw \temp, TI_CPU(gp)
dsll \temp, 3
lui \temp2, %hi(kernelsp)
daddu \temp, \temp2
LONG_S \stackp, %lo(kernelsp)(\temp)
#endif
-#if defined(CONFIG_MIPS64) && defined(CONFIG_BUILD_ELF64)
+#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
lw \temp, TI_CPU(gp)
dsll \temp, 3
LONG_S \stackp, kernelsp(\temp)
LONG_S $6, PT_R6(sp)
MFC0 v1, CP0_EPC
LONG_S $7, PT_R7(sp)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
LONG_S $8, PT_R8(sp)
LONG_S $9, PT_R9(sp)
#endif
.macro RESTORE_TEMP
LONG_L $24, PT_LO(sp)
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
LONG_L $8, PT_R8(sp)
LONG_L $9, PT_R9(sp)
#endif
LONG_L $31, PT_R31(sp)
LONG_L $28, PT_R28(sp)
LONG_L $25, PT_R25(sp)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
LONG_L $8, PT_R8(sp)
LONG_L $9, PT_R9(sp)
#endif
LONG_L $31, PT_R31(sp)
LONG_L $28, PT_R28(sp)
LONG_L $25, PT_R25(sp)
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
LONG_L $8, PT_R8(sp)
LONG_L $9, PT_R9(sp)
#endif
* Most of the inline functions are rather naive implementations so I just
* didn't bother updating them for 64-bit ...
*/
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#ifndef IN_STRING_C
return __res;
}
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
#define __HAVE_ARCH_MEMSET
extern void *memset(void *__s, int __c, size_t __count);
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define __HAVE_ARCH_MEMSCAN
static __inline__ void *memscan(void *__addr, int __c, size_t __size)
{
return __addr;
}
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
#endif /* _ASM_STRING_H */
return retval;
}
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
{
__u64 retval;
return retval;
}
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old,
unsigned long new)
{
#define current_thread_info() __current_thread_info
/* thread information allocation */
-#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_MIPS32)
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
#define THREAD_SIZE_ORDER (1)
#endif
-#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_MIPS64)
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT)
#define THREAD_SIZE_ORDER (2)
#endif
#ifdef CONFIG_PAGE_SIZE_8KB
#endif
#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
- || defined(CONFIG_MIPS64)
+ || defined(CONFIG_64BIT)
typedef u64 dma_addr_t;
#else
typedef u32 dma_addr_t;
*
* For historical reasons, these macros are grossly misnamed.
*/
-#ifdef CONFIG_MIPS32
+#ifdef CONFIG_32BIT
#define __UA_LIMIT 0x80000000UL
#define __UA_t0 "$8"
#define __UA_t1 "$9"
-#endif /* CONFIG_MIPS32 */
+#endif /* CONFIG_32BIT */
-#ifdef CONFIG_MIPS64
+#ifdef CONFIG_64BIT
#define __UA_LIMIT (- TASK_SIZE)
#define __UA_t0 "$12"
#define __UA_t1 "$13"
-#endif /* CONFIG_MIPS64 */
+#endif /* CONFIG_64BIT */
/*
* USER_DS is a bitmask that has the bits set that may not be set in a valid
# ifndef __mips64
# define __ARCH_WANT_STAT64
# endif
-# ifdef CONFIG_MIPS32
+# ifdef CONFIG_32BIT
# define __ARCH_WANT_SYS_TIME
# endif
# ifdef CONFIG_MIPS32_O32
projects / mirror_ubuntu-hirsute-kernel.git / commitdiff