ARM: sun8i: v3s: add support for Lichee Pi Zero w/ dock board

The Lichee Pi Zero board has a "dock board" which needs to be soldered
with the 1.27mm stamp holes on a Lichee Pi Zero board.

It features:
- Onboard MIC and headphone jack (not supported yet)
- Ethernet port (not supported yet)
- An extra MicroSD slot connected to MMC1 controller
- four keys connected to the LRADC.

As it needs to be soldered with the main board to use, add a stand-alone
device tree for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c5e1d944d1c714f0fcd49cfd1614e7957f0bd52..929a4167fcaa7e1e6463051a16ce446b7da269fe 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -905,7 +905,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
        sun8i-h3-orangepi-plus.dtb \
        sun8i-h3-orangepi-plus2e.dtb \
        sun8i-r16-parrot.dtb \
-       sun8i-v3s-licheepi-zero.dtb
+       sun8i-v3s-licheepi-zero.dtb \
+       sun8i-v3s-licheepi-zero-dock.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
        sun9i-a80-optimus.dtb \
        sun9i-a80-cubieboard4.dtb

diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
new file mode 100644 (file)
index 0000000..d131109
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-v3s-licheepi-zero.dts"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Lichee Pi Zero with Dock";
+       compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
+                    "allwinner,sun8i-v3s";
+
+       leds {
+               /* The LEDs use PG0~2 pins, which conflict with MMC1 */
+               status = "disbaled";
+       };
+};
+
+&mmc1 {
+       broken-cd;
+       bus-width = <4>;
+       vmmc-supply = <&reg_vcc3v3>;
+       status = "okay";
+};
+
+&lradc {
+       vref-supply = <&reg_vcc3v0>;
+       status = "okay";
+
+       button@200 {
+               label = "Volume Up";
+               linux,code = <KEY_VOLUMEUP>;
+               channel = <0>;
+               voltage = <200000>;
+       };
+
+       button@400 {
+               label = "Volume Down";
+               linux,code = <KEY_VOLUMEDOWN>;
+               channel = <0>;
+               voltage = <400000>;
+       };
+
+       button@600 {
+               label = "Select";
+               linux,code = <KEY_SELECT>;
+               channel = <0>;
+               voltage = <600000>;
+       };
+
+       button@800 {
+               label = "Start";
+               linux,code = <KEY_OK>;
+               channel = <0>;
+               voltage = <800000>;
+       };
+};