Currently, the ethernet RGMII mode on the LD20 reference board is
unstable.
The default drive-strength of ethernet TX pins is too strong because
there is no dumping resistor on the TX lines on the board.
Weaken the drive-strength to make the ethernet more stable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
reg = <0>;
};
};
+
+&pinctrl_ether_rgmii {
+ tx {
+ pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+ "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+ drive-strength = <9>;
+ };
+};