return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
+typedef void (*int_handler_t)(struct adapter *adap);
+
struct intr_info {
unsigned int mask; /* bits to check in interrupt status */
const char *msg; /* message to print or NULL */
short stat_idx; /* stat counter to increment or -1 */
unsigned short fatal; /* whether the condition reported is fatal */
+ int_handler_t int_handler; /* platform-specific int handler */
};
/**
} else if (acts->msg && printk_ratelimit())
dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
status & acts->mask);
+ if (acts->int_handler)
+ acts->int_handler(adapter);
mask |= acts->mask;
}
status &= mask;
{ ERR_INVALID_CIDX_INC,
"SGE GTS CIDX increment too large", -1, 0 },
{ ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 },
- { F_DBFIFO_LP_INT, NULL, -1, 0 },
- { F_DBFIFO_HP_INT, NULL, -1, 0 },
- { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 },
+ { F_DBFIFO_LP_INT, NULL, -1, 0, t4_db_full },
+ { F_DBFIFO_HP_INT, NULL, -1, 0, t4_db_full },
+ { F_ERR_DROPPED_DB, NULL, -1, 0, t4_db_dropped },
{ ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0,
"SGE IQID > 1023 received CPL for FL", -1, 0 },
{ ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1,
};
v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1) |
- ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32);
+ ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32);
if (v) {
dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n",
- (unsigned long long)v);
+ (unsigned long long)v);
t4_write_reg(adapter, SGE_INT_CAUSE1, v);
t4_write_reg(adapter, SGE_INT_CAUSE2, v >> 32);
}
- err = t4_read_reg(adapter, A_SGE_INT_CAUSE3);
- if (err & (F_DBFIFO_HP_INT|F_DBFIFO_LP_INT))
- t4_db_full(adapter);
- if (err & F_ERR_DROPPED_DB)
- t4_db_dropped(adapter);
-
if (t4_handle_intr_status(adapter, SGE_INT_CAUSE3, sge_intr_info) ||
v != 0)
t4_fatal_err(adapter);
(var).retval_len16 = htonl(FW_LEN16(var)); \
} while (0)
+int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
+ u32 addr, u32 val)
+{
+ struct fw_ldst_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_WRITE |
+ V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE));
+ c.cycles_to_len16 = htonl(FW_LEN16(c));
+ c.u.addrval.addr = htonl(addr);
+ c.u.addrval.val = htonl(val);
+
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/*
+ * t4_mem_win_read_len - read memory through PCIE memory window
+ * @adap: the adapter
+ * @addr: address of first byte requested aligned on 32b.
+ * @data: len bytes to hold the data read
+ * @len: amount of data to read from window. Must be <=
+ * MEMWIN0_APERATURE after adjusting for 16B alignment
+ * requirements of the the memory window.
+ *
+ * Read len bytes of data from MC starting at @addr.
+ */
+int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len)
+{
+ int i;
+ int off;
+
+ /*
+ * Align on a 16B boundary.
+ */
+ off = addr & 15;
+ if ((addr & 3) || (len + off) > MEMWIN0_APERTURE)
+ return -EINVAL;
+
+ t4_write_reg(adap, A_PCIE_MEM_ACCESS_OFFSET, addr & ~15);
+ t4_read_reg(adap, A_PCIE_MEM_ACCESS_OFFSET);
+
+ for (i = 0; i < len; i += 4)
+ *data++ = t4_read_reg(adap, (MEMWIN0_BASE + off + i));
+
+ return 0;
+}
+
/**
* t4_mdio_rd - read a PHY register through MDIO
* @adap: the adapter