Driver: wl12xx - Texas Instruments 802.11 wireless LAN driver
File: wl1271-fw.bin
+ Version: 6.1.0.50.350 (STA-only)
File: wl1271-fw-2.bin
+ Version: 6.1.5.50.74 (STA-only)
File: wl1271-fw-ap.bin
+ Version: 6.2.1.0.54 (AP-only)
File: wl127x-fw-3.bin
+ Version: 6.3.0.0.77
File: wl127x-fw-plt-3.bin
+ Version: 6.3.0.0.77 (PLT-only)
+ File: wl127x-fw-4-sr.bin
+ Version: 6.3.5.0.98 (Single-role)
+ File: wl127x-fw-4-mr.bin
+ Version: 6.5.2.0.15 (Multi-role)
+ File: wl127x-fw-4-plt.bin
+ Version: 6.3.5.0.98 (PLT-only)
File: wl128x-fw.bin
+ Version: 7.1.5.50.74 (STA-only)
File: wl128x-fw-ap.bin
+ Version: 7.2.1.0.54 (AP-only)
File: wl128x-fw-3.bin
+ Version: 7.3.0.0.77
File: wl128x-fw-plt-3.bin
+ Version: 7.3.0.0.77
+ File: wl128x-fw-4-sr.bin
+ Version: 7.3.5.0.98 (Single-role)
+ File: wl128x-fw-4-mr.bin
+ Version: 7.5.2.0.15 (Multi-role)
+ File: wl128x-fw-4-plt.bin
+ Version: 7.3.5.0.98 (PLT)
File: wl127x-nvs.bin
File: wl128x-nvs.bin
Licence: See LICENCE.ti-connectivity for details.
- Station: wl1271-fw.bin version 6.1.0.50.350
- Station: wl1271-fw-2.bin version 6.1.5.50.74
- Station: wl128x-fw.bin version 7.1.5.50.74
- Access Point: wl1271-fw-ap.bin version 6.2.1.0.54
- Access Point: wl128x-fw-ap.bin version 7.2.1.0.54
- Station & Access Point: wl127x-fw-3.bin version Rev 6.3.0.0.77
- PLT: wl127x-fw-3.bin version PLT 6.3.0.0.77
- Station & Access Point: wl128x-fw-3.bin version Rev 7.3.0.0.77
- PLT: wl128x-fw-3.bin version PLT 7.3.0.0.77
-
- The nvs file includes two parts:
+ The NVS file includes two parts:
- radio calibration
- - ini setting parameters
+ - HW configuration parameters (aka. INI values)
- In order to have correct NVS file for your device NVS tool should be use:
- http://linuxwireless.org/en/users/Drivers/wl12xx/calibrator
+ The published NVS files are for testing only. Every device needs to
+ hava a unique NVS which is properly calibrated for best results. You
+ can find more information about NVS generation for your device here:
- Example NVS files (not optimal) for wl127x and wl128x includes.
- To use example NVS set symbolic link wl12xx-nvs.bin to one of
- them (depending the chip on the platform)
+ http://wireless.kernel.org/en/users/Drivers/wl12xx/calibrator
- In order to use that files copy ti-connectivity directory to target FS at
+ If you're using a wl127x based device, use a symbolic link called
+ wl1271-nvs.bin that links to the wl127x-nvs.bin file. If you are
+ using wl128x, link to wl128x-nvs.bin instead.
+
+ The driver expects to find the firmwares under a ti-connectivity
+ subdirectory. So if your system looks for firmwares in /lib/firmware,
+ the firmwares for wl12xx chips must be located in
/lib/firmware/ti-connectivity/.
--------------------------------------------------------------------------
File: rtl_nic/rtl8168e-2.fw
File: rtl_nic/rtl8168e-3.fw
-Version: 0.0.3
+Version: 0.0.4
File: rtl_nic/rtl8168f-1.fw
-Version: 0.0.3
+Version: 0.0.4
File: rtl_nic/rtl8168f-2.fw
-Version: 0.0.3
+Version: 0.0.4
File: rtl_nic/rtl8411-1.fw
-Version: 0.0.1
+Version: 0.0.2
File: rtl_nic/rtl8402-1.fw
Version: 0.0.1