serial: cpm_uart: implement the cpm_uart_early_write() function for console poll

The cpm_uart_early_write() function which was used for console poll
isn't implemented in the cpm uart driver.

Implementing this function both fixes the build when CONFIG_CONSOLE_POLL
is set and allows kgdboc to work via the cpm uart.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 9eb62a256e9a675af529475d178c7925e6de5302..cd6cf575902e4aab43a2dc232c7358db93ff8a82 100644 (file)
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
        }
 }
 
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+               const char *string, u_int count)
+{
+       unsigned int i;
+       cbd_t __iomem *bdp, *bdbase;
+       unsigned char *cpm_outp_addr;
+
+       /* Get the address of the host memory buffer.
+        */
+       bdp = pinfo->tx_cur;
+       bdbase = pinfo->tx_bd_base;
+
+       /*
+        * Now, do each character.  This is not as bad as it looks
+        * since this is a holding FIFO and not a transmitting FIFO.
+        * We could add the complexity of filling the entire transmit
+        * buffer, but we would just wait longer between accesses......
+        */
+       for (i = 0; i < count; i++, string++) {
+               /* Wait for transmitter fifo to empty.
+                * Ready indicates output is ready, and xmt is doing
+                * that, not that it is ready for us to send.
+                */
+               while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+                       ;
+
+               /* Send the character out.
+                * If the buffer address is in the CPM DPRAM, don't
+                * convert it.
+                */
+               cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+                                       pinfo);
+               *cpm_outp_addr = *string;
+
+               out_be16(&bdp->cbd_datlen, 1);
+               setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+               if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+                       bdp = bdbase;
+               else
+                       bdp++;
+
+               /* if a LF, also do CR... */
+               if (*string == 10) {
+                       while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+                               ;
+
+                       cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+                                               pinfo);
+                       *cpm_outp_addr = 13;
+
+                       out_be16(&bdp->cbd_datlen, 1);
+                       setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+                       if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+                               bdp = bdbase;
+                       else
+                               bdp++;
+               }
+       }
+
+       /*
+        * Finally, Wait for transmitter & holding register to empty
+        *  and restore the IER
+        */
+       while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+               ;
+
+       pinfo->tx_cur = bdp;
+}
+#endif
+
 #ifdef CONFIG_CONSOLE_POLL
 /* Serial polling routines for writing and reading from the uart while
  * in an interrupt or debug context.
@@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port,
        static char ch[2];
 
        ch[0] = (char)c;
-       cpm_uart_early_write(pinfo->port.line, ch, 1);
+       cpm_uart_early_write(pinfo, ch, 1);
 }
 #endif /* CONFIG_CONSOLE_POLL */
 
@@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s,
                                   u_int count)
 {
        struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
-       unsigned int i;
-       cbd_t __iomem *bdp, *bdbase;
-       unsigned char *cp;
        unsigned long flags;
        int nolock = oops_in_progress;
 
@@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
                spin_lock_irqsave(&pinfo->port.lock, flags);
        }
 
-       /* Get the address of the host memory buffer.
-        */
-       bdp = pinfo->tx_cur;
-       bdbase = pinfo->tx_bd_base;
-
-       /*
-        * Now, do each character.  This is not as bad as it looks
-        * since this is a holding FIFO and not a transmitting FIFO.
-        * We could add the complexity of filling the entire transmit
-        * buffer, but we would just wait longer between accesses......
-        */
-       for (i = 0; i < count; i++, s++) {
-               /* Wait for transmitter fifo to empty.
-                * Ready indicates output is ready, and xmt is doing
-                * that, not that it is ready for us to send.
-                */
-               while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-                       ;
-
-               /* Send the character out.
-                * If the buffer address is in the CPM DPRAM, don't
-                * convert it.
-                */
-               cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
-               *cp = *s;
-
-               out_be16(&bdp->cbd_datlen, 1);
-               setbits16(&bdp->cbd_sc, BD_SC_READY);
-
-               if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
-                       bdp = bdbase;
-               else
-                       bdp++;
-
-               /* if a LF, also do CR... */
-               if (*s == 10) {
-                       while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-                               ;
-
-                       cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
-                       *cp = 13;
-
-                       out_be16(&bdp->cbd_datlen, 1);
-                       setbits16(&bdp->cbd_sc, BD_SC_READY);
-
-                       if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
-                               bdp = bdbase;
-                       else
-                               bdp++;
-               }
-       }
-
-       /*
-        * Finally, Wait for transmitter & holding register to empty
-        *  and restore the IER
-        */
-       while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-               ;
-
-       pinfo->tx_cur = bdp;
+       cpm_uart_early_write(pinfo, s, count);
 
        if (unlikely(nolock)) {
                local_irq_restore(flags);