ARM: dts: dra7: Fix suspend warning for vpe powerdomain

We currently are getting the following warning after a system suspend:

Powerdomain (vpe_pwrdm) didn't enter target state 0

Looks like this is because the STANDBYMODE bit for SMART_IDLE should
not be used. The TRM "Table 12-348. VPE_SYSCONFIG" says that the value
for SMART_IDLE is "0x2: Same behavior as bit-field value of 0x1". But
if the SMART_IDLE value is used, PM_VPE_PWRSTST LASTPOWERSTATEENTERED
bits always show value of 3.

Let's fix the issue by dropping SMART_IDLE for vpe. And let's also add
the missing the powerdomain for vpe.

Fixes: 1a2095160594 ("ARM: dts: dra7: Add ti-sysc node for VPE")
Cc: Benoit Parrot <bparrot@ti.com>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0a11bacffc1f17a76f9469a8af69da3a7deeadef..5733e3a4ea8e71e54a5c0bc3750ccb57f9470271 100644 (file)
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4188,11 +4188,11 @@
                        reg = <0x1d0010 0x4>;
                        reg-names = "sysc";
                        ti,sysc-midle = <SYSC_IDLE_FORCE>,
-                                       <SYSC_IDLE_NO>,
-                                       <SYSC_IDLE_SMART>;
+                                       <SYSC_IDLE_NO>;
                        ti,sysc-sidle = <SYSC_IDLE_FORCE>,
                                        <SYSC_IDLE_NO>,
                                        <SYSC_IDLE_SMART>;
+                       power-domains = <&prm_vpe>;
                        clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
                        clock-names = "fck";
                        #address-cells = <1>;