cfg80211: fix extension channel checks to initiate communication

When operating in a mode that initiates communication and using
HT40 we should fail if we cannot use both primary and secondary
channels to initiate communication. Our current ht40 allowmap
only covers STA mode of operation, for beaconing modes we need
a check on the fly as the mode of operation is dynamic and
there other flags other than disable which we should read
to check if we can initiate communication.

Do not allow for initiating communication if our secondary HT40
channel has is either disabled, has a passive scan flag, a
no-ibss flag or is a radar channel. Userspace now has similar
checks but this is also needed in-kernel.

Reported-by: Jouni Malinen <jouni.malinen@atheros.com>
Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index d0c92dddb26bddb5b3d55a82ebf39fa8917e446c..c8d190d911e46984b5eb43ebf3f625e035a32bed 100644 (file)
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -44,6 +44,36 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
        return chan;
 }
 
+static bool can_beacon_sec_chan(struct wiphy *wiphy,
+                               struct ieee80211_channel *chan,
+                               enum nl80211_channel_type channel_type)
+{
+       struct ieee80211_channel *sec_chan;
+       int diff;
+
+       switch (channel_type) {
+       case NL80211_CHAN_HT40PLUS:
+               diff = 20;
+       case NL80211_CHAN_HT40MINUS:
+               diff = -20;
+       default:
+               return false;
+       }
+
+       sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff);
+       if (!sec_chan)
+               return false;
+
+       /* we'll need a DFS capability later */
+       if (sec_chan->flags & (IEEE80211_CHAN_DISABLED |
+                              IEEE80211_CHAN_PASSIVE_SCAN |
+                              IEEE80211_CHAN_NO_IBSS |
+                              IEEE80211_CHAN_RADAR))
+               return false;
+
+       return true;
+}
+
 int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
                      struct wireless_dev *wdev, int freq,
                      enum nl80211_channel_type channel_type)
@@ -68,6 +98,28 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
        if (!chan)
                return -EINVAL;
 
+       /* Both channels should be able to initiate communication */
+       if (wdev && (wdev->iftype == NL80211_IFTYPE_ADHOC ||
+                    wdev->iftype == NL80211_IFTYPE_AP ||
+                    wdev->iftype == NL80211_IFTYPE_AP_VLAN ||
+                    wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
+                    wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+               switch (channel_type) {
+               case NL80211_CHAN_HT40PLUS:
+               case NL80211_CHAN_HT40MINUS:
+                       if (!can_beacon_sec_chan(&rdev->wiphy, chan,
+                                                channel_type)) {
+                               printk(KERN_DEBUG
+                                      "cfg80211: Secondary channel not "
+                                      "allowed to initiate communication\n");
+                               return -EINVAL;
+                       }
+                       break;
+               default:
+                       break;
+               }
+       }
+
        result = rdev->ops->set_channel(&rdev->wiphy,
                                        wdev ? wdev->netdev : NULL,
                                        chan, channel_type);