*/
static unsigned long clk_mtu_get_rate(struct clk *clk)
{
- void __iomem *addr = __io_address(UX500_PRCMU_BASE)
- + PRCM_TCR;
+ void __iomem *addr;
u32 tcr;
int mtu = (int) clk->data;
/*
unsigned long mturate;
unsigned long retclk;
+ if (cpu_is_u5500())
+ addr = __io_address(U5500_PRCMU_BASE);
+ else if (cpu_is_u8500())
+ addr = __io_address(U8500_PRCMU_BASE);
+ else
+ ux500_unknown_soc();
+
/*
* On a startup, always conifgure the TCR to the doze mode;
* bootloaders do it for us. Do this in the kernel too.
*/
- writel(PRCM_TCR_DOZE_MODE, addr);
+ writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
- tcr = readl(addr);
+ tcr = readl(addr + PRCM_TCR);
/* Get the rate from the parent as a default */
if (clk->parent_periph)
#include "devices-db5500.h"
static struct map_desc u5500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
+
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
void __init u5500_map_io(void)
{
- ux500_map_io();
-
iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
}
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+
+ __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
+
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
void __init u8500_map_io(void)
{
- ux500_map_io();
-
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
if (cpu_is_u8500ed())
#include "clock.h"
-static struct map_desc ux500_io_desc[] __initdata = {
- __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
-};
+#ifdef CONFIG_CACHE_L2X0
+static void __iomem *l2x0_base;
+#endif
void __init ux500_map_io(void)
{
- iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
}
void __init ux500_init_irq(void)
{
- gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
- __io_address(UX500_GIC_CPU_BASE));
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (cpu_is_u5500()) {
+ dist_base = __io_address(U5500_GIC_DIST_BASE);
+ cpu_base = __io_address(U5500_GIC_CPU_BASE);
+ } else if (cpu_is_u8500()) {
+ dist_base = __io_address(U8500_GIC_DIST_BASE);
+ cpu_base = __io_address(U8500_GIC_CPU_BASE);
+ } else
+ ux500_unknown_soc();
+
+ gic_init(0, 29, dist_base, cpu_base);
/*
* Init clocks here so that they are available for system timer
static inline void ux500_cache_sync(void)
{
- void __iomem *base = __io_address(UX500_L2CC_BASE);
+ void __iomem *base = l2x0_base;
+
writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
*/
static void ux500_l2x0_inv_all(void)
{
- void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+ void __iomem *base = l2x0_base;
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
- writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
- ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
+ ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}
static int ux500_l2x0_init(void)
{
- void __iomem *l2x0_base;
-
- l2x0_base = __io_address(UX500_L2CC_BASE);
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
{
#ifdef CONFIG_LOCAL_TIMERS
/* Setup the local timer base */
- twd_base = __io_address(UX500_TWD_BASE);
+ if (cpu_is_u5500())
+ twd_base = __io_address(U5500_TWD_BASE);
+ else if (cpu_is_u8500())
+ twd_base = __io_address(U8500_TWD_BASE);
+ else
+ ux500_unknown_soc();
#endif
- /* Setup the MTU base */
- if (cpu_is_u8500ed())
+ if (cpu_is_u5500())
+ mtu_base = __io_address(U5500_MTU0_BASE);
+ else if (cpu_is_u8500ed())
mtu_base = __io_address(U8500_MTU0_BASE_ED);
+ else if (cpu_is_u8500())
+ mtu_base = __io_address(U8500_MTU0_BASE);
else
- mtu_base = __io_address(UX500_MTU0_BASE);
+ ux500_unknown_soc();
nmdk_timer_init();
}
#error Invalid Ux500 debug UART
#endif
-#define __UX500_UART(n) UX500_UART##n##_BASE
+/*
+ * DEBUG_LL only works if only one SOC is built in. We don't use #else below
+ * in order to get "__UX500_UART redefined" warnings if more than one SOC is
+ * built, so that there's some hint during the build that something is wrong.
+ */
+
+#ifdef CONFIG_UX500_SOC_DB5500
+#define __UX500_UART(n) U5500_UART##n##_BASE
+#endif
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define __UX500_UART(n) U8500_UART##n##_BASE
+#endif
+
+#ifndef __UX500_UART
+#error Unknown SOC
+#endif
+
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
-#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
-#ifdef CONFIG_UX500_SOC_DB8500
-#define UX500(periph) U8500_##periph##_BASE
-#elif defined(CONFIG_UX500_SOC_DB5500)
-#define UX500(periph) U5500_##periph##_BASE
-#endif
-
-#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0)
-#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1)
-#define UX500_B2R2_BASE UX500(B2R2)
-
-#define UX500_CLKRST1_BASE UX500(CLKRST1)
-#define UX500_CLKRST2_BASE UX500(CLKRST2)
-#define UX500_CLKRST3_BASE UX500(CLKRST3)
-#define UX500_CLKRST5_BASE UX500(CLKRST5)
-#define UX500_CLKRST6_BASE UX500(CLKRST6)
-
-#define UX500_DMA_BASE UX500(DMA)
-#define UX500_FSMC_BASE UX500(FSMC)
-
-#define UX500_GIC_CPU_BASE UX500(GIC_CPU)
-#define UX500_GIC_DIST_BASE UX500(GIC_DIST)
-
-#define UX500_I2C1_BASE UX500(I2C1)
-#define UX500_I2C2_BASE UX500(I2C2)
-#define UX500_I2C3_BASE UX500(I2C3)
-
-#define UX500_L2CC_BASE UX500(L2CC)
-#define UX500_MCDE_BASE UX500(MCDE)
-#define UX500_MTU0_BASE UX500(MTU0)
-#define UX500_MTU1_BASE UX500(MTU1)
-#define UX500_PRCMU_BASE UX500(PRCMU)
-
-#define UX500_RNG_BASE UX500(RNG)
-#define UX500_RTC_BASE UX500(RTC)
-
-#define UX500_SCU_BASE UX500(SCU)
-
-#define UX500_SDI0_BASE UX500(SDI0)
-#define UX500_SDI1_BASE UX500(SDI1)
-#define UX500_SDI2_BASE UX500(SDI2)
-#define UX500_SDI3_BASE UX500(SDI3)
-#define UX500_SDI4_BASE UX500(SDI4)
-
-#define UX500_SPI0_BASE UX500(SPI0)
-#define UX500_SPI1_BASE UX500(SPI1)
-#define UX500_SPI2_BASE UX500(SPI2)
-#define UX500_SPI3_BASE UX500(SPI3)
-
-#define UX500_SIA_BASE UX500(SIA)
-#define UX500_SVA_BASE UX500(SVA)
-
-#define UX500_TWD_BASE UX500(TWD)
-
-#define UX500_UART0_BASE UX500(UART0)
-#define UX500_UART1_BASE UX500(UART1)
-#define UX500_UART2_BASE UX500(UART2)
-
-#define UX500_USBOTG_BASE UX500(USBOTG)
-
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
}
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+#define ux500_unknown_soc() BUG()
#endif
#include <asm/mach/time.h>
#include <linux/init.h>
-extern void __init ux500_map_io(void);
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
+#include <mach/setup.h>
/*
* control for which core is the next to come out of the secondary
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
}
+static void __iomem *scu_base_addr(void)
+{
+ if (cpu_is_u5500())
+ return __io_address(U5500_SCU_BASE);
+ else if (cpu_is_u8500())
+ return __io_address(U8500_SCU_BASE);
+ else
+ ux500_unknown_soc();
+
+ return NULL;
+}
+
static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
static void __init wakeup_secondary(void)
{
+ void __iomem *backupram;
+
+ if (cpu_is_u5500())
+ backupram = __io_address(U5500_BACKUPRAM0_BASE);
+ else if (cpu_is_u8500())
+ backupram = __io_address(U8500_BACKUPRAM0_BASE);
+ else
+ ux500_unknown_soc();
+
/*
* write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
* backup ram register at offset 0x1FF0, which is what boot rom code
* is waiting for. This would wake up the secondary core from WFE
*/
-#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
__raw_writel(virt_to_phys(u8500_secondary_startup),
- __io_address(UX500_BACKUPRAM0_BASE) +
- U8500_CPU1_JUMPADDR_OFFSET);
+ backupram + UX500_CPU1_JUMPADDR_OFFSET);
-#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
__raw_writel(0xA1FEED01,
- __io_address(UX500_BACKUPRAM0_BASE) +
- U8500_CPU1_WAKEMAGIC_OFFSET);
+ backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
mb();
*/
void __init smp_init_cpus(void)
{
+ void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
- ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > NR_CPUS) {
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- scu_enable(__io_address(UX500_SCU_BASE));
+ scu_enable(scu_base_addr());
wakeup_secondary();
}
projects / mirror_ubuntu-kernels.git / commitdiff