On uniprocessor, it's always zero for optimize that.
On SMP, the jmpl to the stub kills the return address stack in the cpu
branch prediction logic, so expand the code sequence inline and use a
code patching section to fix things up. This also always better and
explicit register selection, which will be taken advantage of in a
future changeset.
The hard_smp_processor_id() function is big, so do not inline it.
Fix up tests for Jalapeno to also test for Serrano chips too. These
tests want "jbus Ultra-IIIi" cases to match, so that is what we should
test for.
Signed-off-by: David S. Miller <davem@davemloft.net>
2: retl
nop
- /* Read cpu ID from hardware, return in %g6.
- * (callers_pc - 4) is in %g1. Patched at boot time.
- *
- * Default is spitfire implementation.
- *
- * The instruction sequence needs to be 5 instructions
- * in order to fit the longest implementation, which is
- * currently starfire.
- */
- .align 32
- .globl __get_cpu_id
-__get_cpu_id:
- ldxa [%g0] ASI_UPA_CONFIG, %g6
- srlx %g6, 17, %g6
- jmpl %g1 + 0x4, %g0
- and %g6, 0x1f, %g6
- nop
-
-__get_cpu_id_cheetah_safari:
- ldxa [%g0] ASI_SAFARI_CONFIG, %g6
- srlx %g6, 17, %g6
- jmpl %g1 + 0x4, %g0
- and %g6, 0x3ff, %g6
- nop
-
-__get_cpu_id_cheetah_jbus:
- ldxa [%g0] ASI_JBUS_CONFIG, %g6
- srlx %g6, 17, %g6
- jmpl %g1 + 0x4, %g0
- and %g6, 0x1f, %g6
- nop
-
-__get_cpu_id_starfire:
- sethi %hi(0x1fff40000d0 >> 9), %g6
- sllx %g6, 9, %g6
- or %g6, 0xd0, %g6
- jmpl %g1 + 0x4, %g0
- lduwa [%g6] ASI_PHYS_BYPASS_EC_E, %g6
-
- .globl per_cpu_patch
-per_cpu_patch:
- sethi %hi(this_is_starfire), %o0
- lduw [%o0 + %lo(this_is_starfire)], %o1
- sethi %hi(__get_cpu_id_starfire), %o0
- brnz,pn %o1, 10f
- or %o0, %lo(__get_cpu_id_starfire), %o0
- sethi %hi(tlb_type), %o0
- lduw [%o0 + %lo(tlb_type)], %o1
- brz,pt %o1, 11f
- nop
- rdpr %ver, %o0
- srlx %o0, 32, %o0
- sethi %hi(0x003e0016), %o1
- or %o1, %lo(0x003e0016), %o1
- cmp %o0, %o1
- sethi %hi(__get_cpu_id_cheetah_jbus), %o0
- be,pn %icc, 10f
- or %o0, %lo(__get_cpu_id_cheetah_jbus), %o0
- sethi %hi(__get_cpu_id_cheetah_safari), %o0
- or %o0, %lo(__get_cpu_id_cheetah_safari), %o0
-10:
- sethi %hi(__get_cpu_id), %o1
- or %o1, %lo(__get_cpu_id), %o1
- lduw [%o0 + 0x00], %o2
- stw %o2, [%o1 + 0x00]
- flush %o1 + 0x00
- lduw [%o0 + 0x04], %o2
- stw %o2, [%o1 + 0x04]
- flush %o1 + 0x04
- lduw [%o0 + 0x08], %o2
- stw %o2, [%o1 + 0x08]
- flush %o1 + 0x08
- lduw [%o0 + 0x0c], %o2
- stw %o2, [%o1 + 0x0c]
- flush %o1 + 0x0c
- lduw [%o0 + 0x10], %o2
- stw %o2, [%o1 + 0x10]
- flush %o1 + 0x10
-11:
+#ifdef CONFIG_SMP
+ .globl hard_smp_processor_id
+hard_smp_processor_id:
+ __GET_CPUID(%o0)
retl
nop
+#endif
#include <asm/cache.h>
#include <asm/cpudata.h>
#include <asm/auxio.h>
+#include <asm/head.h>
#ifdef CONFIG_SMP
static void distribute_irqs(void);
unsigned long ver;
__asm__ ("rdpr %%ver, %0" : "=r" (ver));
- if ((ver >> 32) == 0x003e0016) {
+ if ((ver >> 32) == __JALAPENO_ID ||
+ (ver >> 32) == __SERRANO_ID) {
/* We set it to our JBUS ID. */
__asm__ __volatile__("ldxa [%%g0] %1, %0"
: "=r" (tid)
"' linux-.soft2 to .soft2");
}
+static void __init per_cpu_patch(void)
+{
+#ifdef CONFIG_SMP
+ struct cpuid_patch_entry *p;
+ unsigned long ver;
+ int is_jbus;
+
+ if (tlb_type == spitfire && !this_is_starfire)
+ return;
+
+ __asm__ ("rdpr %%ver, %0" : "=r" (ver));
+ is_jbus = ((ver >> 32) == __JALAPENO_ID ||
+ (ver >> 32) == __SERRANO_ID);
+
+ p = &__cpuid_patch;
+ while (p < &__cpuid_patch_end) {
+ unsigned long addr = p->addr;
+ unsigned int *insns;
+
+ switch (tlb_type) {
+ case spitfire:
+ insns = &p->starfire[0];
+ break;
+ case cheetah:
+ case cheetah_plus:
+ if (is_jbus)
+ insns = &p->cheetah_jbus[0];
+ else
+ insns = &p->cheetah_safari[0];
+ break;
+ default:
+ prom_printf("Unknown cpu type, halting.\n");
+ prom_halt();
+ };
+
+ *(unsigned int *) (addr + 0) = insns[0];
+ __asm__ __volatile__("flush %0" : : "r" (addr + 0));
+
+ *(unsigned int *) (addr + 4) = insns[1];
+ __asm__ __volatile__("flush %0" : : "r" (addr + 4));
+
+ *(unsigned int *) (addr + 8) = insns[2];
+ __asm__ __volatile__("flush %0" : : "r" (addr + 8));
+
+ *(unsigned int *) (addr + 12) = insns[3];
+ __asm__ __volatile__("flush %0" : : "r" (addr + 12));
+
+ p++;
+ }
+#endif
+}
+
void __init setup_arch(char **cmdline_p)
{
/* Initialize PROM console and command line. */
/* Work out if we are starfire early on */
check_if_starfire();
- /* Now we know enough to patch the __get_cpu_id()
- * trampoline used by trap code.
+ /* Now we know enough to patch the get_cpuid sequences
+ * used by trap code.
*/
per_cpu_patch();
static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
u64 pstate, ver;
- int nack_busy_id, is_jalapeno;
+ int nack_busy_id, is_jbus;
if (cpus_empty(mask))
return;
* derivative processor.
*/
__asm__ ("rdpr %%ver, %0" : "=r" (ver));
- is_jalapeno = ((ver >> 32) == 0x003e0016);
+ is_jbus = ((ver >> 32) == __JALAPENO_ID ||
+ (ver >> 32) == __SERRANO_ID);
__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
for_each_cpu_mask(i, mask) {
u64 target = (i << 14) | 0x70;
- if (!is_jalapeno)
+ if (!is_jbus)
target |= (nack_busy_id << 24);
__asm__ __volatile__(
"stxa %%g0, [%0] %1\n\t"
for_each_cpu_mask(i, mask) {
u64 check_mask;
- if (is_jalapeno)
+ if (is_jbus)
check_mask = (0x2UL << (2*i));
else
check_mask = (0x2UL <<
#include <asm/processor.h>
#include <asm/timer.h>
#include <asm/kdebug.h>
+#include <asm/head.h>
#ifdef CONFIG_KMOD
#include <linux/kmod.h>
#endif
cheetah_error_log[i].afsr = CHAFSR_INVALID;
__asm__ ("rdpr %%ver, %0" : "=r" (ver));
- if ((ver >> 32) == 0x003e0016) {
+ if ((ver >> 32) == __JALAPENO_ID ||
+ (ver >> 32) == __SERRANO_ID) {
cheetah_error_table = &__jalapeno_error_table[0];
cheetah_afsr_errors = JPAFSR_ERRORS;
} else if ((ver >> 32) == 0x003e0015) {
__tsb_phys_patch = .;
.tsb_phys_patch : { *(.tsb_phys_patch) }
__tsb_phys_patch_end = .;
+ __cpuid_patch = .;
+ .cpuid_patch : { *(.cpuid_patch) }
+ __cpuid_patch_end = .;
. = ALIGN(8192);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
} __attribute__((aligned(64)));
extern struct trap_per_cpu trap_block[NR_CPUS];
extern void init_cur_cpu_trap(void);
-extern void per_cpu_patch(void);
extern void setup_tba(void);
+#ifdef CONFIG_SMP
+struct cpuid_patch_entry {
+ unsigned int addr;
+ unsigned int cheetah_safari[4];
+ unsigned int cheetah_jbus[4];
+ unsigned int starfire[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+#endif
+
#endif /* !(__ASSEMBLY__) */
#define TRAP_PER_CPU_THREAD 0x00
#define TRAP_BLOCK_SZ_SHIFT 6
-/* Clobbers %g1, loads %g6 with local processor's cpuid */
-#define __GET_CPUID \
- ba,pt %xcc, __get_cpu_id; \
- rd %pc, %g1;
+#ifdef CONFIG_SMP
+
+#define __GET_CPUID(REG) \
+ /* Spitfire implementation (default). */ \
+661: ldxa [%g0] ASI_UPA_CONFIG, REG; \
+ srlx REG, 17, REG; \
+ and REG, 0x1f, REG; \
+ nop; \
+ .section .cpuid_patch, "ax"; \
+ /* Instruction location. */ \
+ .word 661b; \
+ /* Cheetah Safari implementation. */ \
+ ldxa [%g0] ASI_SAFARI_CONFIG, REG; \
+ srlx REG, 17, REG; \
+ and REG, 0x3ff, REG; \
+ nop; \
+ /* Cheetah JBUS implementation. */ \
+ ldxa [%g0] ASI_JBUS_CONFIG, REG; \
+ srlx REG, 17, REG; \
+ and REG, 0x1f, REG; \
+ nop; \
+ /* Starfire implementation. */ \
+ sethi %hi(0x1fff40000d0 >> 9), REG; \
+ sllx REG, 9, REG; \
+ or REG, 0xd0, REG; \
+ lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\
+ .previous;
/* Clobbers %g1, current address space PGD phys address into %g7. */
#define TRAP_LOAD_PGD_PHYS \
- __GET_CPUID \
- sllx %g6, TRAP_BLOCK_SZ_SHIFT, %g6; \
+ __GET_CPUID(%g1) \
sethi %hi(trap_block), %g7; \
+ sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g1; \
or %g7, %lo(trap_block), %g7; \
- add %g7, %g6, %g7; \
+ add %g7, %g1, %g7; \
ldx [%g7 + TRAP_PER_CPU_PGD_PADDR], %g7;
/* Clobbers %g1, loads local processor's IRQ work area into %g6. */
#define TRAP_LOAD_IRQ_WORK \
- __GET_CPUID \
- sethi %hi(__irq_work), %g1; \
- sllx %g6, 6, %g6; \
- or %g1, %lo(__irq_work), %g1; \
- add %g1, %g6, %g6;
+ __GET_CPUID(%g1) \
+ sethi %hi(__irq_work), %g6; \
+ sllx %g1, 6, %g1; \
+ or %g6, %lo(__irq_work), %g6; \
+ add %g6, %g1, %g6;
/* Clobbers %g1, loads %g6 with current thread info pointer. */
#define TRAP_LOAD_THREAD_REG \
- __GET_CPUID \
- sllx %g6, TRAP_BLOCK_SZ_SHIFT, %g6; \
- sethi %hi(trap_block), %g1; \
- or %g1, %lo(trap_block), %g1; \
- ldx [%g1 + %g6], %g6;
+ __GET_CPUID(%g1) \
+ sethi %hi(trap_block), %g6; \
+ sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g1; \
+ or %g6, %lo(trap_block), %g6; \
+ ldx [%g6 + %g1], %g6;
/* Given the current thread info pointer in %g6, load the per-cpu
* area base of the current processor into %g5. REG1, REG2, and REG3 are
* trap will load the fully resolved %g5 per-cpu base. This can corrupt
* the calculations done by the macro mid-stream.
*/
-#ifdef CONFIG_SMP
#define LOAD_PER_CPU_BASE(REG1, REG2, REG3) \
ldub [%g6 + TI_CPU], REG1; \
sethi %hi(__per_cpu_shift), REG3; \
ldx [REG2 + %lo(__per_cpu_base)], REG2; \
sllx REG1, REG3, REG3; \
add REG3, REG2, %g5;
+
#else
+
+/* Uniprocessor versions, we know the cpuid is zero. */
+#define TRAP_LOAD_PGD_PHYS \
+ sethi %hi(trap_block), %g7; \
+ or %g7, %lo(trap_block), %g7; \
+ ldx [%g7 + TRAP_PER_CPU_PGD_PADDR], %g7;
+
+#define TRAP_LOAD_IRQ_WORK \
+ sethi %hi(__irq_work), %g6; \
+ or %g6, %lo(__irq_work), %g6;
+
+#define TRAP_LOAD_THREAD_REG \
+ sethi %hi(trap_block), %g6; \
+ ldx [%g6 + %lo(trap_block)], %g6;
+
+/* No per-cpu areas on uniprocessor, so no need to load %g5. */
#define LOAD_PER_CPU_BASE(REG1, REG2, REG3)
-#endif
+
+#endif /* !(CONFIG_SMP) */
#endif /* _SPARC64_CPUDATA_H */
#define __CHEETAH_ID 0x003e0014
#define __JALAPENO_ID 0x003e0016
+#define __SERRANO_ID 0x003e0022
#define CHEETAH_MANUF 0x003e
#define CHEETAH_IMPL 0x0014 /* Ultra-III */
* General functions that each host system must provide.
*/
-static __inline__ int hard_smp_processor_id(void)
-{
- if (tlb_type == cheetah || tlb_type == cheetah_plus) {
- unsigned long cfg, ver;
- __asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver));
- if ((ver >> 32) == 0x003e0016) {
- __asm__ __volatile__("ldxa [%%g0] %1, %0"
- : "=r" (cfg)
- : "i" (ASI_JBUS_CONFIG));
- return ((cfg >> 17) & 0x1f);
- } else {
- __asm__ __volatile__("ldxa [%%g0] %1, %0"
- : "=r" (cfg)
- : "i" (ASI_SAFARI_CONFIG));
- return ((cfg >> 17) & 0x3ff);
- }
- } else if (this_is_starfire != 0) {
- return starfire_hard_smp_processor_id();
- } else {
- unsigned long upaconfig;
- __asm__ __volatile__("ldxa [%%g0] %1, %0"
- : "=r" (upaconfig)
- : "i" (ASI_UPA_CONFIG));
- return ((upaconfig >> 17) & 0x1f);
- }
-}
-
+extern int hard_smp_processor_id(void);
#define raw_smp_processor_id() (current_thread_info()->cpu)
extern void smp_setup_cpu_possible_map(void);
projects / mirror_ubuntu-eoan-kernel.git / commitdiff