media: ti-vpe: cal: Store struct device in cal_dev

The cal_dev structure stores the platform_device pointer, but most
accesses to that field need the device pointer. Store the struct device
pointer directly to simplify the code, and use to_platform_device() in
the two locations that need the platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index ec52cb7f3039c53624bf384ee7fb816ddced59c4..42b948e784d224b5f401438b5ba2592d83bf7ab1 100644 (file)
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -53,13 +53,12 @@ MODULE_PARM_DESC(debug, "activates debug info");
 #define cal_dbg(level, cal, fmt, arg...)                               \
        do {                                                            \
                if (debug >= (level))                                   \
-                       dev_printk(KERN_DEBUG, &(cal)->pdev->dev,       \
-                                  fmt, ##arg);                         \
+                       dev_printk(KERN_DEBUG, (cal)->dev, fmt, ##arg); \
        } while (0)
 #define cal_info(cal, fmt, arg...)     \
-       dev_info(&(cal)->pdev->dev, fmt, ##arg)
+       dev_info((cal)->dev, fmt, ##arg)
 #define cal_err(cal, fmt, arg...)      \
-       dev_err(&(cal)->pdev->dev, fmt, ##arg)
+       dev_err((cal)->dev, fmt, ##arg)
 
 #define ctx_dbg(level, ctx, fmt, arg...)       \
        cal_dbg(level, (ctx)->cal, "ctx%u: " fmt, (ctx)->index, ##arg)
@@ -263,7 +262,7 @@ struct cal_data {
 struct cal_camerarx {
        void __iomem            *base;
        struct resource         *res;
-       struct platform_device  *pdev;
+       struct device           *dev;
        struct regmap_field     *fields[F_MAX_FIELDS];
 
        struct cal_dev          *cal;
@@ -280,7 +279,7 @@ struct cal_dev {
        int                     irq;
        void __iomem            *base;
        struct resource         *res;
-       struct platform_device  *pdev;
+       struct device           *dev;
 
        const struct cal_data   *data;
 
@@ -908,7 +907,7 @@ static int cal_camerarx_regmap_init(struct cal_dev *cal,
                 * Here we update the reg offset with the
                 * value found in DT
                 */
-               phy->fields[i] = devm_regmap_field_alloc(&cal->pdev->dev,
+               phy->fields[i] = devm_regmap_field_alloc(cal->dev,
                                                         cal->syscon_camerrx,
                                                         field);
                if (IS_ERR(phy->fields[i])) {
@@ -923,7 +922,6 @@ static int cal_camerarx_regmap_init(struct cal_dev *cal,
 static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
 {
        struct v4l2_fwnode_endpoint *endpoint = &phy->endpoint;
-       struct platform_device *pdev = phy->cal->pdev;
        struct device_node *ep_node;
        char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES * 2];
        unsigned int i;
@@ -933,7 +931,7 @@ static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
         * Find the endpoint node for the port corresponding to the PHY
         * instance, and parse its CSI-2-related properties.
         */
-       ep_node = of_graph_get_endpoint_by_regs(pdev->dev.of_node,
+       ep_node = of_graph_get_endpoint_by_regs(phy->cal->dev->of_node,
                                                phy->instance, 0);
        if (!ep_node) {
                /*
@@ -990,7 +988,7 @@ done:
 static struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
                                                unsigned int instance)
 {
-       struct platform_device *pdev = cal->pdev;
+       struct platform_device *pdev = to_platform_device(cal->dev);
        struct cal_camerarx *phy;
        int ret;
 
@@ -1006,7 +1004,7 @@ static struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
                                                (instance == 0) ?
                                                "cal_rx_core0" :
                                                "cal_rx_core1");
-       phy->base = devm_ioremap_resource(&pdev->dev, phy->res);
+       phy->base = devm_ioremap_resource(cal->dev, phy->res);
        if (IS_ERR(phy->base)) {
                cal_err(cal, "failed to ioremap\n");
                ret = PTR_ERR(phy->base);
@@ -1042,7 +1040,8 @@ static void cal_camerarx_destroy(struct cal_camerarx *phy)
 
 static int cal_camerarx_init_regmap(struct cal_dev *cal)
 {
-       struct device_node *np = cal->pdev->dev.of_node;
+       struct platform_device *pdev = to_platform_device(cal->dev);
+       struct device_node *np = cal->dev->of_node;
        struct regmap_config config = { };
        struct regmap *syscon;
        struct resource *res;
@@ -1057,16 +1056,16 @@ static int cal_camerarx_init_regmap(struct cal_dev *cal)
                return 0;
        }
 
-       dev_warn(&cal->pdev->dev, "failed to get ti,camerrx-control: %ld\n",
+       dev_warn(cal->dev, "failed to get ti,camerrx-control: %ld\n",
                 PTR_ERR(syscon));
 
        /*
         * Backward DTS compatibility. If syscon entry is not present then
         * check if the camerrx_control resource is present.
         */
-       res = platform_get_resource_byname(cal->pdev, IORESOURCE_MEM,
+       res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
                                           "camerrx_control");
-       base = devm_ioremap_resource(&cal->pdev->dev, res);
+       base = devm_ioremap_resource(cal->dev, res);
        if (IS_ERR(base)) {
                cal_err(cal, "failed to ioremap camerrx_control\n");
                return PTR_ERR(base);
@@ -1157,7 +1156,7 @@ static void cal_ctx_pix_proc_config(struct cal_ctx *ctx)
                 *
                 * Instead of failing here just use 8 bpp as a default.
                 */
-               dev_warn_once(&ctx->cal->pdev->dev,
+               dev_warn_once(ctx->cal->dev,
                              "%s:%d:%s: bpp:%d unsupported! Overwritten with 8.\n",
                              __FILE__, __LINE__, __func__, ctx->fmt->bpp);
                extract = CAL_PIX_PROC_EXTRACT_B8;
@@ -1279,14 +1278,14 @@ static irqreturn_t cal_irq(int irq_cal, void *data)
                reg_write(cal, CAL_HL_IRQSTATUS(0), status);
 
                if (status & CAL_HL_IRQ_OCPO_ERR_MASK)
-                       dev_err_ratelimited(&cal->pdev->dev, "OCPO ERROR\n");
+                       dev_err_ratelimited(cal->dev, "OCPO ERROR\n");
 
                for (i = 0; i < CAL_NUM_CSI2_PORTS; ++i) {
                        if (status & CAL_HL_IRQ_CIO_MASK(i)) {
                                u32 cio_stat = reg_read(cal,
                                                        CAL_CSI2_COMPLEXIO_IRQSTATUS(i));
 
-                               dev_err_ratelimited(&cal->pdev->dev,
+                               dev_err_ratelimited(cal->dev,
                                                    "CIO%u error: %#08x\n", i, cio_stat);
 
                                reg_write(cal, CAL_CSI2_COMPLEXIO_IRQSTATUS(i),
@@ -1388,7 +1387,7 @@ static int cal_querycap(struct file *file, void *priv,
        strscpy(cap->card, CAL_MODULE_NAME, sizeof(cap->card));
 
        snprintf(cap->bus_info, sizeof(cap->bus_info),
-                "platform:%s", dev_name(&ctx->cal->pdev->dev));
+                "platform:%s", dev_name(ctx->cal->dev));
        return 0;
 }
 
@@ -1822,7 +1821,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
                goto err;
        }
 
-       pm_runtime_get_sync(&ctx->cal->pdev->dev);
+       pm_runtime_get_sync(ctx->cal->dev);
 
        cal_ctx_csi2_config(ctx);
        cal_ctx_pix_proc_config(ctx);
@@ -1837,7 +1836,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
        if (ret) {
                v4l2_subdev_call(ctx->phy->sensor, core, s_power, 0);
                ctx_err(ctx, "stream on failed in subdev\n");
-               pm_runtime_put_sync(&ctx->cal->pdev->dev);
+               pm_runtime_put_sync(ctx->cal->dev);
                goto err;
        }
 
@@ -1917,7 +1916,7 @@ static void cal_stop_streaming(struct vb2_queue *vq)
        ctx->next_frm = NULL;
        spin_unlock_irqrestore(&ctx->slock, flags);
 
-       pm_runtime_put_sync(&ctx->cal->pdev->dev);
+       pm_runtime_put_sync(ctx->cal->dev);
 }
 
 static const struct vb2_ops cal_video_qops = {
@@ -2065,7 +2064,7 @@ static int cal_ctx_v4l2_init(struct cal_ctx *ctx)
        q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
        q->lock = &ctx->mutex;
        q->min_buffers_needed = 3;
-       q->dev = &ctx->cal->pdev->dev;
+       q->dev = ctx->cal->dev;
 
        ret = vb2_queue_init(q);
        if (ret)
@@ -2266,13 +2265,13 @@ static int cal_media_init(struct cal_dev *cal)
         * Initialize the V4L2 device (despite the function name, this performs
         * initialization, not registration).
         */
-       ret = v4l2_device_register(&cal->pdev->dev, &cal->v4l2_dev);
+       ret = v4l2_device_register(cal->dev, &cal->v4l2_dev);
        if (ret) {
                cal_err(cal, "Failed to register V4L2 device\n");
                return ret;
        }
 
-       vb2_dma_contig_set_max_seg_size(&cal->pdev->dev, DMA_BIT_MASK(32));
+       vb2_dma_contig_set_max_seg_size(cal->dev, DMA_BIT_MASK(32));
 
        return 0;
 }
@@ -2292,7 +2291,7 @@ static void cal_media_cleanup(struct cal_dev *cal)
        }
 
        v4l2_device_unregister(&cal->v4l2_dev);
-       vb2_dma_contig_clear_max_seg_size(&cal->pdev->dev);
+       vb2_dma_contig_clear_max_seg_size(cal->dev);
 }
 
 /* ------------------------------------------------------------------
@@ -2305,7 +2304,7 @@ static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst)
        struct cal_ctx *ctx;
        int ret;
 
-       ctx = devm_kzalloc(&cal->pdev->dev, sizeof(*ctx), GFP_KERNEL);
+       ctx = devm_kzalloc(cal->dev, sizeof(*ctx), GFP_KERNEL);
        if (!ctx)
                return NULL;
 
@@ -2393,7 +2392,7 @@ static int cal_probe(struct platform_device *pdev)
                return -ENODEV;
        }
 
-       cal->pdev = pdev;
+       cal->dev = &pdev->dev;
        platform_set_drvdata(pdev, cal);
 
        /* Acquire resources: clocks, CAMERARX regmap, I/O memory and IRQ. */