(2.6.20) pata_mpiix: probing cleanup (resend)

MPIIX has only single channel IDE which can be configured for either primary or
secondary legacy I/O ports and IRQ.  So, get rid of the unneeded second probe
entry in mpiix_init_one() and of the invalid (but unused anyway) enable bits in
mpiix_pre_reset().

Warning: this cleanup has only been compile-tested...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 4e97a7efccef587b7b0a4042263e68680ff183f3..ca8c965179b13a05f308e5bae65d7efc1ff798fc 100644 (file)
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.4"
+#define DRV_VERSION "0.7.5"
 
 enum {
        IDETIM = 0x6C,          /* IDE control register */
@@ -49,12 +49,9 @@ enum {
 static int mpiix_pre_reset(struct ata_port *ap)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       static const struct pci_bits mpiix_enable_bits[] = {
-               { 0x6D, 1, 0x80, 0x80 },
-               { 0x6F, 1, 0x80, 0x80 }
-       };
+       static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 };
 
-       if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
+       if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
                return -ENOENT;
        ap->cbl = ATA_CBL_PATA40;
        return ata_std_prereset(ap);
@@ -219,6 +216,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        if (!(idetim & ENABLED))
                return -ENODEV;
 
+       /* See if it's primary or secondary channel... */
        if (!(idetim & SECONDARY)) {
                irq = 14;
                cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8);
@@ -243,10 +241,11 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        probe.port_ops = &mpiix_port_ops;
        probe.sht = &mpiix_sht;
        probe.pio_mask = 0x1F;
-       probe.irq = irq;
        probe.irq_flags = SA_SHIRQ;
        probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
        probe.n_ports = 1;
+
+       probe.irq = irq;
        probe.port[0].cmd_addr = cmd_addr;
        probe.port[0].ctl_addr = ctl_addr;
        probe.port[0].altstatus_addr = ctl_addr;