drm/bridge: analogix_dp: Move enable video into config_video()

We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.

We needed to increase the delay in the timeout loop because there is
random "Timeout of video streamclk ok" message happen when debug edp
panel, this time do not define in the spec.

Cc: 征增 王 <wzz@rock-chips.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-2-enric.balletbo@collabora.com

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5c52307146c7c3a09c22b6def2a469ac921b388b..05a0ca4af05759f946e5eafea1c5b938ded7d3a9 100644 (file)
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -819,11 +819,10 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
                if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
                        break;
                if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
-                       dev_err(dp->dev, "Timeout of video streamclk ok\n");
+                       dev_err(dp->dev, "Timeout of slave video streamclk ok\n");
                        return -ETIMEDOUT;
                }
-
-               usleep_range(1, 2);
+               usleep_range(1000, 1001);
        }
 
        /* Set to use the register calculated M/N video */
@@ -838,6 +837,9 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
        /* Configure video slave mode */
        analogix_dp_enable_video_master(dp, 0);
 
+       /* Enable video */
+       analogix_dp_start_video(dp);
+
        timeout_loop = 0;
 
        for (;;) {
@@ -948,9 +950,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
                        DRM_ERROR("failed to enable the panel\n");
        }
 
-       /* Enable video */
-       analogix_dp_start_video(dp);
-
        dp->psr_enable = analogix_dp_detect_sink_psr(dp);
        if (dp->psr_enable)
                analogix_dp_enable_sink_psr(dp);